EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7383/B1C3-AMQA/X/MS Features ˙Popular T-1 3/4 diameter package. ˙Choice of various viewing angles. ˙Available on tape and reel. ˙Reliable and robust. ˙ESD-withstand voltage: up to 4KV. ˙The product itself will remain within RoHS compliant version. Descriptions ˙The series is specially designed for applications requiring higher brightness. ˙The LED lamps are available with different colors, intensities, epoxy colors, etc. ˙Superior performance in outdoor environment Applications ˙Color Graphic Signs ˙Message boards ˙Variable message signs (VMS) ˙Commercial outdoor advertising Device Selection Guide LED Part No. Chip Mterial Emitted Color Lens Color Stopper 7383/B1C3-AMQA/MS InGaN Super Blue Water Clear No 7383/B1C3-AMQA/P/MS InGaN Super Blue Water Clear Yes Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev :1 Page: 1 of 8 Device Number : DLE-738-032 Prepared date:05-05-2006 Prepared : Flourix Chen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7383/B1C3-AMQA/X/MS Package Dimensions Stopper type No Stopper type Notes: ˙All dimensions are in millimeters, tolerance is 0.25mm except being specified. ˙Lead spacing is measured where the lead emerges from the package. ˙Protruded resin under flange is 1.5mm Max LED. Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev :1 Page: 2 of 8 Device Number : DLE-738-032 Prepared date:05-05-2006 Prepared : Flourix Chen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7383/B1C3-AMQA/X/MS Absolute Maximum Ratings (Ta=25℃) Parameter Forward Current Pulse Forward Current*1 Symbol IF IFP Rating 30 100 Operating Temperature Topr -40 ~ +85 Units mA mA ℃ Storage Temperature Tstg -40 ~ +100 ℃ ESD V ℃ Electrostatic Discharge Soldering Temperature Tsol 4K 260 ±5 Power Dissipation Pd 120 mW Zener Reverse Current Reverse Voltage Iz VR 100 5 mA *2 V Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10. *2:Soldering time≦5 seconds. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Units Forward Voltage VF IF=20mA 2.8 -- 3.6 V Zener Reverse Voltage Vz IZ=5mA 5.2 -- -- V Luminous Intensity IV IF=20mA 1800 -- 4500 mcd 2θ1/2 IF=20mA -- 30 -- deg Peak Wavelength λp IF=20mA 464 468 476 nm Dominant Wavelength λd IF=20mA -- 470 -- nm Spectrum Radiation Bandwidth Δλ IF=20mA -- 26 -- nm IR VR=5V -- -- 50 μA Viewing Angle Reverse Current Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev :1 Page: 3 of 8 Device Number : DLE-738-032 Prepared date:05-05-2006 Prepared : Flourix Chen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7383/B1C3-AMQA/X/MS Rank Combination (IF=20mA) Rank Luminous Intensity M N P Q 1800~2250 2250~2850 2850~3600 3600~4500 *Measurement Uncertainty of Luminous Intensity: ±15% Rank Forward Voltage Unit: :mcd 0 1 2 3 2.8~3.0 3.0~3.2 3.2~3.4 3.4~3.6 *Measurement Uncertainty of Forward Voltage: ±0.1V Rank 3 Unit:V 4 5 Dominant Wavelength 464~468 468~472 *Measurement Uncertainty of Dominant Wavelength ±1.0nm 472~476 Unit:nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev :1 Page: 4 of 8 Device Number : DLE-738-032 Prepared date:05-05-2006 Prepared : Flourix Chen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7383/B1C3-AMQA/X/MS Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev :1 Page: 5 of 8 Device Number : DLE-738-032 Prepared date:05-05-2006 Prepared : Flourix Chen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7383/B1C3-AMQA/X/MS Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Form Specification EVERLIGHT CPN: P/N: 7383/B1C3-AMQA/X/MS QTY： CAT: HUE: LOT NO： REF: CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev :1 Page: 6 of 8 Device Number : DLE-738-032 Prepared date:05-05-2006 Prepared : Flourix Chen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7383/B1C3-AMQA/X/MS Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up. Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev :1 Page: 7 of 8 Device Number : DLE-738-032 Prepared date:05-05-2006 Prepared : Flourix Chen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7383/B1C3-AMQA/X/MS 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 400℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder joint to case) Bath time. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev :1 Page: 8 of 8 Device Number : DLE-738-032 Prepared date:05-05-2006 Prepared : Flourix Chen