battery driveN, FTP-608 Series 2” high speed thermal printer FTP-628MCL401/451 n Overview The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent. The FTP-628 MCL Series can be used for a variety of applications, such as portable terminals, POS, banking terminals, and measurement and medical equipment. n highlights • Ultra low profile Height 21.8 mm, width 81.2 mm, depth 42.2 mm FTP-628MCL401 • High speed printing It can print at 60 mm/s (480 dotlines/s) maximum by using Fujitsu's unique head drive control. • Auto Cutter Full cut type and partial cut type printers are available by user selection. • Easy paper setting Our unique platen release mechanism allows a wide paper route even if the printer is ultra-compact, so paper can be easily inserted. Conventional auto loading is also available. • Multifunctional die-cast form Wide operating temperature range, long continuous printing, high ESD absorbtion and discharge of static electricity vibration and shock resistant. FTP-628DSL491R • RoHS compliant FTP-628MCL401/451 n Part numbers Name Part Number Printer mechanism with cutter FTP-628MCL401 (Easy Load Model) Printer mechanism without cutter FTP-628MCL451 (Easy Load Model with platen bracket + lock lever) LSI for driving FTP-629CU451R Interface board for Mechanism/Cutter Cutter supported Interface cable Parallel (Centronics) FTP-628Y202 Power cables FTP-628DSL491R Parallel (Centronics) / Serial (RS-232C) Serial (RS-232C) FTP-628Y302 Head, motor, logic FTP-628Y402 nSPECIFICATIONS Item Specifications Part number FTP-628MCL401 Printing method Thermal-line dot method Dot structure 384 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch Effective printing area 48 mm Number of columns ANK 32 columns/line (maximum 12 x 24 dot font) Paper width 58 mm Paper thickness 60 to 100 µ m (some paper in this range may not be used because of paper characteristics) Printing Speed Maximum 60mm/sec. (480 dot line/sec.) at 8.5V Character types Alphanumeric, kana: 159 types International characters: 195 types JIS Kanji (Kanji CG loaded board): about 6800 types Character, dimensions (W×H), number 12 × 24 dots, (1.5 × 3.0 mm), 32 columns: ANK of columns 24 × 24 dots, (3.0 × 3.0 mm), 16 columns: ANK 8 × 16 dots, (1.0 × 2.0 mm), 48 columns: ANK 16 × 16 dots, (2.0 × 2.0 mm), 24 columns: ANK FTP-628MCL401/451 nSPECIFICATIONS Item Interface Power supply Dimensions Weight Life Conforms to RS232C / Centronics For print head 4.2 - 8.5 VDC average current, 1.8 (2.4)A at 7.2V (print ratio: 12.5%, print speed: 60mm/sec. ) For motor 4.2 - 8.5 VDC, 1A maximum For cutter motor 4.75 - 8.5 VDC, 1A maximum For logic 5 VDC ± 5%, 0.1 A maximum Mechanism with cutter 81.2 x 42.2 x 21.8 mm (WxDxH) Interface board 70 x 60 x12 mm Mechanism with cutter Approximately 97g Interface board Approximately 25g Head Pulse resistance: 100 million pulses/dot (under our standard conditions); Abrasion resistance: paper traveling distance 50km (print ratio: 12.5% or less) Cutter 500,000 cuts Platen 5,000 times (open/close) Operating temperature* 0˚ C to 50˚ C Operating humidity Operating environment Storage temperature Detection function Specification 20 to 85% RH (no condensation) -20˚ C to +60˚ C (paper not included) Storage humidity 5 to 95% RH (no condensation) Head temperature detection Detected by thermistor Paper out/mark detection Detected by photo-interrupter Platen release Detected by sliding switch Movable blade Detected by photo-interrupter Recommended thermal sensitive paper High Sensitive Paper TF50KS-E4 (Nippon Paper) Standard paper: TF60KS-E(Nippon Paper), FTP020PU001 (58mm), PD105R (Oji Paper), FTP-020P0701 (58mm) Medium Life Paper TF60KS-F1, FTP-020P0102 (58mm), PD170R (Oji Paper), P220VBB-1 Mitsubishi Paper) Long Life Paper PD160R-N (Oji Paper), AFP-235 (Mitsubishi Paper), TP50KJ-R (Nippon Paper), HA220AA (Nippon Paper) *+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability) FTP-628MCL401/451 n FUNCTION OF INTERFACE BOARD Item Item 1. Test print function 8. Cutter trouble detect 2. Paper out detection 9. Motor power saving function 3. Paper near end detection 10. Mark detection function 4. Platen open detection 11. MCU operation abnormality detection 5. Thermal head temperature abnormality detection 12. Power ON/OFF sequence protection 6. Blow-out fuse detection 13. Motor over-current protection 7. Head voltage abnormality detection 14. Hardware timer n dimensions 1. Printer mechanism (54) FTP-628MCL401 5.4 printer position standard platen center lever pa pe r platen unit 8.2 10.7 2.8 platen unit paper exhaust position 42.2 3.9 7.5 cutting position 3. printer Unit: mm Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open. FTP-628MCL401/451 1. Printer mechanism FTP-628MCL451 FTP-628MCL401/451 2. Interface board (70.0) 63.5 3.25 3.25 50.5 .0 3.25 25.5 .45 30 CN8 2 CN3 8 29 45.5 CN 30 CN2 6 3.5 CN7 .2 8 .25 17.5 3 7 49.5 Mounting height Mounting height Note: . The size with parentheses is a reference value. 2. Part mounting height is maximum. .6 3.25 2 53.5 42.0 3-Ø3.2 FGØ3.2 3.25 (60.0) CN4 Unit:mm FTP-628MCL401/451 FTP-628MCL401 mechanism/cutter FPC PIN Assignment (1)For thermal head, motor and sensor Connector on control circuit: 52610-3090 (Molex or equivalent) No Signa l Content s 1 PH K Cathode for photo interrupto r 2 VSE N paper sensor powe r 3 PH E Emittor for photo interrupto r 4 VH 5 VH 6 DI Data i n 7 CL K Cloc k 8 GN D 9 GN D 10 STB 6 Strobe 6 11 STB 5 Strobe 5 12 STB 4 Strobe 4 13 Vd d Logic powe r 14 TM 15 TM 16 STB 3 Strobe 3 17 STB 2 Strobe 2 18 STB 1 Strobe 1 19 GN D 20 GN D 21 LA T Data latc h 22 DO Data ou t 23 VH 24 VH 25 SW 36 SW 27 MT/ A Excitation signal A 28 MT/ A Excitation signal A 29 MT/ B Excitation signal B 30 MT/ B Excitation signal B Head drive power Head ground Thermistor Head ground Head drive power Platen release switch FTP-628MCL401/451 FTP-628MCL451 mechanism/platen bracket FPC PIN Assignment (1)For thermal head, motor and sensor Connector on control circuit: 52610-3090 (Molex or equivalent) No Signa l Content s 1 PH K Cathode for photo interrupto r 2 VSE N paper sensor powe r 3 PH E Emittor for photo interrupto r 4 VH 5 VH 6 DI Data i n 7 CL K Cloc k 8 GN D 9 GN D 10 STB 6 Strobe 6 11 STB 5 Strobe 5 12 STB 4 Strobe 4 13 Vd d Logic powe r 14 TM 15 TM 16 STB 3 Strobe 3 17 STB 2 Strobe 2 18 STB 1 Strobe 1 19 GN D 20 GN D 21 LA T Data latc h 22 DO Data ou t 23 VH 24 VH 25 SW 36 SW 27 MT/ A Excitation signal A 28 MT/ A Excitation signal A 29 MT/ B Excitation signal B 30 MT/ B Excitation signal B Head drive power Head ground Thermistor Head ground Head drive power Platen release switch FTP-628MCL401/451 (2)For cutter Connector on control circuit: 52610-0890 (Molex or equivalent) No Signa l Content s 1 VSE N Home position sensor powe r 2 PH E Emittor for photo interrupto r 3 PH K Cathode for photo interrupto r 4 MT/ A Excitation signal A 5 MT/ A Excitation signal A 6 MT/ B Excitation signal B 7 MT/ B Excitation signal B 8 NC Not connecte d Sensor (Photointerruptor) Platen unit Thermal head Motor Connector No (FPC pin 30,29, FPC Connect terminal: surface side Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp, The Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. August 17, 2007