MINIATURE RELAY 2-CONTACT 1A (FOR SWITCHING SIGNALS) FTR-B3 SERIES RoHS compliant n Features These are flat type ultra miniature (SMT), 5.2±0.2mm height (through hole) relays for telecommunication and data networking equipments, made of high heat resistant material, which can support IRS and VPS methods. lUltra slim and light weight with a 5.25±0.2 mm height and approximately 0.8 g weight, and an 87mm2 mounting area. Most suitable for decreasing size and weight, space saving and high density packaging of equipment. l Contact spring has superb high frequency characteristics. l High insulation design conforming to the Bellcore, FCC standard, with a minimum of 1.6 mm between coil and contacts insulation distance, an AC 1.5kV coil contact withstand voltage, and a 2.5kV coil-contact withstand surge voltage. l High efficieny polar electromagnet structure implements a140mW low coil power consumption. A power saving latch type is also available. l Gold-plated silver alloy bifurcated contacts having high contact reliability. l UL, CSA recognized. Confirms to IEC 60950, UL1950, EN60950. Spacing & high breakdown voltage (Basic insulation, 150 working volts, pollution degree 2). l RoHS compliant since date code: 0431B8 Please see page 10 for more information l FTR-B3 Series n ORDERING INFORMATION [Example] FTR-B3 (a) G B 012 Z -B ( b)(c) (d) (e) (f ) 10 (g (a) Series Name FTR-B3 Series (b) Terminal type C: through hole G: surface mount S: mounting area, reduced SMT (c) Operation function A: standard type B: latching type (1 coil) (d) Rated voltage of coil 1.5: 1.5VDC 003: 3VDC 024: 24VDC (e) Contact material Z: gold overlay silver alloy (f) Relay enclosing direction* B: standard enclosing direction (g) Number of relays per reel* 10: 1,000 (standard) 4.5: 012: 4.5VDC 12VDC Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking FTR-B3GA012Z-B10 → B3GA012Z Note: *: - Only surface mount types (G and S) are applicable - All relays are packaged in tubes unles P/N ends with -B10 FTR-B3 Series n SAFETY STANDARD AND FILE NUMBERS UL508, 1950 (File No. E63615) C22.2 No. 14, No. 950 (File No. LR40304) Please request when the approval markings are required on the cover. Nominal voltage 1.5 to 12 VDC n 0.5 A 1 A 0.3 A Contact rating 125 VAC 30 VDC 110 VDC resistive COIL DATA CHART Standard type MODEL Rated coil Coil resistance voltage (±10%) Operating voltage Release voltage* Rated power consumption FTR-B3( )A1.5Z 1.5VD C 16. 1 Ω +1.13V +0.15V 140mW FTR-B3( )A003Z 3VD C 64. 3 Ω +2.25V +0.3V 140mW FTR-B3( )A4.5Z 4.5VD C 14 5 Ω +3.38V +0.45V 140mW FTR-B3( )A012Z 12VD C 1,02 8 Ω +9.0V +1.2V 140mW FTR-B3( )A024Z 24VD C 2,50 4 Ω +18.0V +2.4V 230mW Set voltage Release voltage* Rated power consumption * Pulse driven Note: All values in the table are measured at 20˚C. Latching type (1 coil) Rated coil Coil resistance voltage (±10%) FTR-B3 ( )B1.5Z 1.5VD C 22. 5 Ω +1.13V -1.13V 100mW FTR-B3 ( )B003Z 3VD C 90 Ω +2.25V -2.25V 100mW FTR-B3 ( )B4.5Z 4.5VD C 20 3 Ω +3.38V -3.38V 100mW FTR-B3 ( )B012Z 12VD C 1,44 0 Ω +9.0V -9.0V 100mW FTR-B3 ( )B024Z 24VD C 4,80 0 Ω +18.0V -18.0V 120mW * Pulse driven Note: All values in the table are measured at 20˚C. n FTR-B3 Series specifications Item Contact Coil Time Value Standard Type Latching Typ e FTR-B3 ( ) A FTR-B3 ( ) B Arrangement 2Form C Contact material Gold overlay silver allo y Contact type Bifurcated contacts (cross-bar ) Contact resistance (initial value ) 75 mΩ , maximum at 6VDC 1A Contact rating 30VDC 1A, 125VAC 0.3A (resistive) Maximum carrying/switching current 1A Maximum switching power 62.5 VA / 30W Maximum switching voltage 250 VAC, 220 VDC Minimum switching load *1 10mVDC, 0.01mA*1 Capacitance Approximately 0.4pF (between open contacts) Approimately 0.5pF (adjacent contacts) Approximately 1.0pF *1(between coil and contacts) Nominal power (at 20˚ C) 140m W 100m W Operate power (at 20˚ C) 80m W 57m W Operating temperature (no frost) -40˚ C to +85˚ C Operate (at nominal voltage, without bounce) 3ms maximu m Release (at nominal voltage, without bounce ) 3ms maximu m Resistance (at 500VDC) Minimum 1,000 M Ω Dielectric Strength Insulation Surge Strength between open contacts 1,000 VAC 1 minute between adjacent contacts 1,000 VAC 1 minute between coil and contacts 1,500 VAC 1 minute between open contacts 1,500V (at 10 x 160µs) [FCC Part 68] between adjacent contacts 1,500V (at 10 x 160µs) [FCC Part 68] between coil and contacts 1,500V (at 10 x 160µs) [FCC Part 68] 2,500V (at 2 x 10µs) [Bellcore] *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. continued FTR-B3 Series specifications n continued Item Life Other Latching Type FTR-B3 ( ) A FTR-B3 ( ) B Mechanical 50 x 106 operations min. (at 3Hz) 20 x 106 operations min.(at 3Hz) Electrical (resistive load) 100 x 103 operations min. at 1A 30VDC (at 0.5Hz) 100 x 103 operations min. at 0.3A 125VDC (at 0.5Hz) Vibration Malfunction resistance Endurance 10 to 55 Hz at double amplitude of 3.3mm Malfunction Shock resistance Endurance Min. 750 m/s2 Weight Approximately 0.8g 10 to 55 Hz at double amplitude of 5mm Min. 1000 m/s2 Operation (return time characteristics) 5 Set, reset time characteristics 5 4 Time (ms) 4 3 2 3 2 Operation time Set time 1 1 Reset time Release 0 0.1 0.2 0 0.3 0.1 Coil Power (W) 0.2 0.3 Coil Power (W) Nominal Voltage Multiplying Factor (%) characteristic data n Time (ms) Standard Type Pulse characteristics 100 90 80 70 At set/reset 60 50 40 0.5 20 Contact carrying current: 0 0 0 0.1 0.2 Coil Power (W) 0.3 1.8 1.6 1.4 1.2 ting Opera il) o (hot c 1.0 e voltag ge lta ting vo Opera ) il o c l (coo 0.8 0.6 0 20 40 60 80 100 Ambient Temperature (°C) Nominal Voltage Multiplying Factor Contact carrying current: 1A Contact carrying current: 0 Co n cu ta rre ct nt: ca 1A rryi ng 2.0 20 50 100 200 (maximum applied voltage, operating voltage characteristics) Latching Type 2.4 2.2 Co cu nta rre ct nt ca : 1 rry A i 2.0 1.8 ng 1.6 g 40 Nominal Voltage Multiplying Factor (%) 60 Standard type 2.2 10 Ambient Temperature (maximum applied voltage, operating voltage characteristics) 2.4 5 in ry ar tc A ac 1 nt nt: Co rre cu Coil Temperature Rise (°C) 80 2 Pulse width (ms) Ambient Temperature Coil Temperature Rise 1 1.4 1.2 ltage o ting V Opera ) oil (hot c 1.0 g Voltage Operatin il) (cool co 0.8 0.6 0 20 40 60 80 100 Ambient Temperature (°C) continued FTR-B3 Series characteristic data n continued Maximum Switching Power AC Resistive 0.5 DC Resistive 0.3 1 2 5 10 20 30 50 100 200 40 30 30 VD C 20 Re sis tiv e e tiv sis Re 0.2 50 DC Operation (x104) 70 1 0.1 Life Curve 100 5V 12 Contact Current (A) 2 10 0 0.2 0.4 0.6 0.8 1.0 1.2 Contact Current (A) Contact Voltage (V) reference data 100 FTR-B3GA4.5Z n=100 Operate Release 80 60 40 0 10 20 30 40 50 60 70 80 Nominal Voltage Multiplying Factor (%) Distribution of Bounce Time 100 80 60 40 80 60 40 20 1 2 3 Time (ms) 4 0 10 20 30 40 5 80 60 40 50 60 70 80 0 Distribution of Contact Resistance 100 FTR-B3GA4.5Z N=100 Operate Release FTR-B3GA4.5Z n=100 Operate Release 20 Nominal Voltage Multiplying Factor (%) Distribution (%) Distribution (%) 100 FTR-B3GB4.5Z n=100 Operate Release 20 20 0 Distribution of Operate and Release Time FTR-B3GA4.5Z n=100 Make Break 80 60 40 20 0 20 40 60 80 Contact Resistance (mΩ) 100 1 2 3 Time (ms) 4 5 Mechanical Life Test Contact Resistance (mΩ) Distribution (%) 100 Distribution of Operate and Release Voltage Distribution (%) Distribution of Operate and Release Voltage Distribution (%) n 100 80 Operating Voltage 60 40 Release Voltage 20 0 500 FTR-B3GA4.5Z n=8 1200 operations/min. 100 50 Make Break 10 5 100 Initial 500 1000 2000 3000 5000 Operation (x104) continued FTR-B3 Series specifications n 40 Release Voltage 20 FTR-B3GA4.5Z n=8 30 operations/min. 126 VAC 0.3 A (resistive load) 0 500 100 50 Make Break 10 5 1 Initial 0 FTR-B3GA4.5Z n=8 30 operations/min. 30 VAC 1A (resistive load) 0 500 100 50 Make Break 10 5 Initial Standard type 0 Release Voltage -10 Isolation (dB) When coil is ON When coil is OFF Operation (x104) 2 4 6 8 When coil is ON When coil is OFF 0 Release Voltage 0 2 4 6 8 10 Distance between relays I (mm) High Frequency Characteristics 1.8 FTR-B3GA4.5Z n=2 1.6 FTR-B3GA4.5Z n=2 50 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 Operating Voltage 10 -20 100 10 0 -10 10 150 Standard type FTR-B3GA4.5Z n=4 10 -20 20 High Frequency Characteristics -20 20 n 20 Magnetic Interference 20 -10 Release Voltage Operating Voltage -10 -20 40 Operation (x104) FTR-B3GA4.5Z n=4 10 Operating Voltage 60 1 Magnetic Interference 20 80 10 Nominal Voltage Nominal Voltage Multiplying Factor (%) Multiplying Factor (%) Operating Voltage 60 Electrical Life Test 100 Insertion Loss (dB) 80 Nominal Voltage Nominal Voltage Multiplying Factor (%) Multiplying Factor (%) Nominal Voltage Multiplying Factor (%) Electrical Life Test 100 Contact Resistance (mΩ) Contact Resistance (mΩ) Nominal Voltage Multiplying Factor (%) continued 10 0 Distance between relays I (mm) 1 3 5 7 10 30 50 70 100 Frequency (MHz) DIMENSIONS 1 3 5 7 10 30 50 70 100 Frequency (MHz) 300 500 700 1000 300 500700 1000 FTR-B3C( )( )( ) 7.2 ±0.2 ±0.2 3.5 +0.3 -0.2 0.5 ±0.05 5.2 ±0.02 10.6 l Dimensions 0.4 +0.2 (1.5) 3.2 ±0.2 l Mounting Pad (TOP VIEW) 2.2 ±0.2 2.2 l Wiring Diagram (TOP VIEW) (-) 8 7 6 5 2 3 4 5.0 8 8-O 0.85 5.08±0.2 ±0.2 1 (+) 3.2 2.2 2.2 Marking (Coil side indication) Unit: mm FTR-B3 Series n DIMENSIONS FTR-B3G( )( )( ) l Dimensions ±0.2 1.05 0.4 +0.2 (1.5) 0.8 0.8 0.8 ±0.2 2.2 5.08±0.2 8.2 +0.5 -0.3 ±0.2 l Wiring Diagram (-) (TOP VIEW) 8 0.8 7 6 5 1 2 3 (+) Marking (Coil side indication) 4 2.56 6.64 2.56 l Mounting Pad (TOP VIEW) 3.2 ±0.2 2.2 5.45 +0 7.2 ±0.2 0.2 +0.2 10.6 2.2 3.2 2.2 Unit: mm FTR-B3S( )( )( ) ±0.2 ±0.2 1.05 0.2 +0.2 7.2 0.4 +0.2 (1.5) 3.2 ±0.2 2.2 ±0.2 l Mounting Pad (TOP VIEW) 2.2 ±0.2 l Wiring Diagram (TOP VIEW) 0.8 0.8 5.08±0.2 7.2 +0.5 -0.3 (-) 8 0.8 7 6 5 2 3 4 6.14 2.08 0.8 5.45 +0 10.6 l Dimensions 2.08 1 (+) 3.2 2.2 2.2 Marking (Coil side indication) Unit: mm PACKAGING SPECIFICATIONS n l Packaging Method - Packaging Standard: JIS C 0806 - Taping Type: TB 1612 - Reel Type: R16D - Quantity of 1reel: 1000 pieces FTR-B3 Series l Packaging Orientation Code:B Feeding Orientation mark side l (2) Dimensions - Reel dimensions l Tape Dimensions Top cover tape Embossed carrier tape Unit: mm Note: Relays are sold in packs of 1000 pieces, please order 1000 pieces as one unit. n RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) soldering T3 T 3= 245C max. T 2= 200C max. cooling T= 165C max. T2 T 0 preheating 120 sec maximum 30 sec Max. VPS (Vapor Phase Soldering) Temperature (C) Temperature (C) IRS (Infrared Reflow Soldering) T3 T2 T 215C maximum soldering cooling T 3= 200C maximum T 2= 165C maximum T= 100C maximum preheating 0 60 sec Max. 60 sec Max. 90 sec Max. Note: 1.Temperature profiles show the temperature of PC board surface. 2.Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. n PRECAUTIONS - For details on general precautions, refer to the section on technical descriptions. - Since this is a polar relay, follow the instructions of the internal wiring diagram for the +- connections of the coil. - Note that the terminal array and internal wiring of the surface mount relay are a top view FTR-B3 Series RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0CU-Ni will be used for the FTR-B3 and FTR-B4 series relays. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu amd Sm-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005. Reflow Solder condtion PeakTemp.: max. 250°C Soldering temperature (°C) 250 Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: 220 Cooling Pre-heating 170 Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. 130 90~120 sec. max. 120 sec. 20~30 sec. (duration) We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical realys. l 4. Tin Whisker SnAgCu and SnCuNi solder is known as low risk of tin whisker. No considerable length whisker was found by our in-house test. l 10 FTR-B3 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/relays/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. February 15, 2007 11