QUIET POWER RELAY 1 POLE—20 A (FOR AUTOMOTIVE APPLICATIONS) FTR-P1 SERIES ■ FEATURES Original construction, where reduction of operational noise is considered when mounted on PCB, made it possible to design this quiet relay. (Average acoustic noise level: 53 dB, distance 10 cm) ● New types of materials are used for the conductive parts, allowing this compact relay to carry 20 AMP. ● Two types of contact material are available for various contact loads. ● Wider contact gap (0.6 mm) version is also available for enhanced cut-off ability to overload condition. ● NO TF OR DE N SIG EW N ■ ORDERING INFORMATION [Example] FTR-P1 (a) C (b) N 012 W1 (c) (d) (e) -** (f ) (a) Series Name FTR-P1: FTR-P1 Relay (b) Contact Arrangement C : 1 form C (SPDT) (c) Contact Gap N P : 0.3 mm gap : 0.6 mm gap (d) Nominal Voltage 009 010 012 : 9 VDC : 10 VDC : 12 VDC (e) Contact Material W1 : Silver-tin oxide-indium (f) Custom Designation To be assigned for custom specification Note: Part No. is printed on the top of relay as follows. (Example) Designation ordered: FTR-P1CN012W1 Stamp: P1CN012W1 1 FTR-P1 SERIES (QUIET TYPE) ■ SPECIFICATIONS Item Contact Arrangement 1 form C (SPDT) Material Silver-tin oxide-indium (W1 type) Voltage Drop (resistance) Maximum 100 mV (at 2 A 12 VDC) Ratings 14 VDC/20 A (locked motor load) 14 VDC/inrush 20 A, break 4 A (motor free load) Maximum Carrying Current 20 A/ 1 hour (25°C, 100% rated coil voltage) Maximum Inrush Current (reference) W1 Type: 60 A Max. Switching Current (reference) 30 A at 16 VDC NO TF OR DE N SIG EW N Min. Switching Coil Time Value Life Other Specifications Load*1 6 VDC 1 A Operating Temperature Range –40°C to +85°C (no frost) (reter to the CHARACTERISTIC DATA) Storage Temperature Range –40°C to +100°C (no frost) Operate (at nominal voltage) Maximum 10 ms Release (at nominal voltage) Maximum 5 ms Mechanical 1 ×107 operations minimum Electrical 2 ×105 operations minimum (locked motor load) 4 ×105 operations minimum (motor free load) Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Resistance Misoperation 100 m/s2 Endurance 1,000 m/s 2 Weight *1 (reference) Approximately 10.0 g Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum applicable load varies with the switching frequency and operating environment. ■ COIL DATA CHART ● 0.3 mm contact gap type MODEL Nominal voltage Coil resistance (±10%) Must operate voltage Must release voltage FTR-P1CN009W1 9 VDC 135 Ω 5.4 V (at 20°C) 6.8 V (at 85°C) 0.7 V FTR-P1CN010W1 10 VDC 180 Ω 6.3 V (at 20°C) 7.9 V (at 85°C) 0.8 V FTR-P1CN012W1 12 VDC 240 Ω 7.3 V (at 20°C) 9.2 V (at 85°C) 0.9 V W1 TYPE Thermal resistance 73°C/W 2 FTR-P1 SERIES (QUIET TYPE) ● 0.6 mm Contact Gap Type MODEL Nominal voltage Coil resistance (±10%) Must operate voltage Must release voltage FTR-P1CP009W1 9 VDC 100 Ω 5.4 V (at 20°C) 6.8 V (at 85°C) 0.7 V FTR-P1CP010W1 10 VDC 135 Ω 6.3 V (at 20°C) 7.9 V (at 85°C) 0.8 V FTR-P1CP012W1 12 VDC 180 Ω 7.3 V (at 20°C) 9.2 V (at 85°C) 0.9 V W1 TYPE Thermal resistance 65°C/W Note: Values in the table of coil resistance and must release voltage are measured at 20°C. NO TF OR DE N SIG EW N ■ SUITABLE APPLICATION CONTACT MATERIAL W1: Silver-tin oxide-indium SUITABLE LOAD Door lock Power window Solenoids, etc. (locked rotor) ■ CHARACTERISTIC DATA 1. MAXIMUM BREAK CAPACITY 2. LIFE 14 VDC Motor locked load 40 35 30 Resistive load 25 Locked motor load 0.3 mm gap 15 0.6 mm gap 20 0.3 mm gap 0.6 mm gap 12 10 Number of operations (x104) Contact switching current (A) 50 30 20 10 5 10 10 15 20 25 30 35 40 50 Voltage between contacts (V) 15 20 25 30 35 404550 Locked motor current (A) 3 FTR-P1 SERIES (QUIET TYPE) 3. LIFE TEST (EXAMPLE) • Shift of pick-up drop-out voltage • Test item 14 V DC-20 A Motor Lock 200,000 operations minimum RL-1 N.O. N.C. M N.O. N.C. RL-2 Percent of rated coil voltage (%) • Test circuit 100 80 60 PICK-UP 40 DROP-OUT 20 NO TF OR DE N SIG EW N 0 1 Initial 10 100 • Shift of contact resistance • Current wave form 0A (RL-2) 20 A 0A 20 sec 0.3 sec 10 sec 0.3 sec Contact Resistance (mΩ) (RL-1) 20 A (Measured at 6 V-1 A) 1000 Break Make 100 10 1 Initial • Test item 14 V DC-20 A motor free 400,000 operations minimum 10 Number of operations (x104) 100 • Shift of pick-up drop-out voltage • Test circuit N.O. N.C. M Percent of rated coil voltage (%) 100 80 60 40 PICK-UP DROP-OUT 20 0 Initial 1 10 100 • Shift of contact resistance • Current wave form (Measured at 6 V-1 A) 20 A 4A 0A 16 A Contact Resistance (mΩ) 1000 Break Make 100 10 Initial 1 10 Number of operations (x104) 100 4 FTR-P1 SERIES (QUIET TYPE) 4. COIL TEMPERATURE RISE 5. OPERATING COIL VOLTAGE RANGE (EXAMPLE) (V) 15 Applied voltage to the coil Coil temperature rise (°C) 120 100 80 (2) carrying current : applied coil power 10 A 0.8 W 0.6 W 60 0.8 W 0.6 W (1) carrying current : applied coil power 0 A 40 CONTINUOUSLY APPLICABLE COIL VOLTAGE RANGE 10 5 NO TF OR DE N SIG EW N 20 at 20˚C –30 0 50 100 Operating temperature (˚C) 0 0 10 20 30 Applied time (minutes) 6. VIBRATION RESISTANCE CHARACTERISTICS Dual amplitude (mm) 2 Acceleration (m/s ) 100 50 5 2 44 m/s 1 0.5 0.1 0.01 Automotive electronic standard Frequency : 10~2000 Hz Acceleration : 100 m/s2 maximum Vibration direction : see diagram Detection level : chatter of 100 µs minimum Range where chattering occurs N.O. contact coil not energized on Z-direction Z 10 10 50 100 500 1000 FTR-P1 X 2000 Y Frequency (Hz) 7. SHOCK RESISTANCE CHARACTERISTICS Shock level (m/s2) 1,000 Shock application time : 11 ms, half-sine wave Test material : coil, energized and de-energized Shock direction: see diagram Detection level : chatter of 100 µs minimum 800 600 400 Y2 200 0 X1 X2 Y1 Y2 Z1 Shock direction Z2 Z2 : N.C. contact (coil de-energized) : N.C. contact (coil energized) Y1 FTR-P1 X1 Z1 X2 5 FTR-P1 SERIES (QUIET TYPE) ■ REFERENCE DATA Distribution of operate and release voltage Distribution (%) Distribution (%) 40 20 0 FTR-P1 n = 100 80 Distribution (%) 80 60 100 FTR-P1 n = 100 Operate Release Operate Release FTR-P1 n = 100 Distribution of contact resistance Distribution of operate and release time 100 80 60 40 20 60 40 20 NO TF OR DE N SIG EW N 0 0 10 20 30 40 50 60 70 80 Nominal voltage multiplying factor (%) 0 1 2 3 4 5 Time (ms) 6 7 0 8 0 10 20 30 40 50 60 70 80 Contact resistance (mΩ) ■ DIMENSIONS ● Dimensions P1CP012W1 F&T 9616 3.5 16.3+0.2 21.8+0.2 16.9+0.6 (2.3) ● Mounting hole layout (BOTTOM VIEW) (2.45) 12.0 ● Schematic (BOTTOM VIEW) N.C. 12.0 4 5 1 5-¿ 1.2 12.2 Tolerance –0.1 3 COM 2 N.O. 2.1 Unit : mm 6 FTR-P1 SERIES (QUIET TYPE) Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] www.fcal.fujitsu.com NO TF OR DE N SIG EW N © 2005 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev.06/07/2005 7