G1084-XX Global Mixed-mode Technology Inc. 5A Low-Dropout Linear Regulator Features General Description The G1084-XX is a low dropout linear regulator with a dropout of 1.3V at 5A of load current. It is available in three fixed voltages: 1.5V, 1.8V, 2.5V and 3.3V. Refer to the G1084 for the adjustable version. Available in 1.5V, 1.8V, 2.5V, 3.3V version TO-252,TO-263 package Internal short circuit current limiting Internal over temperature protection Output current 5A The G1084-XX provides over temperature and over current protection circuits to prevent it from being damaged by abnormal operating conditions. Applications Post regulation for switching DC/DC converter High efficiency linear regulator Battery powered instrumentation Motherboard The G1084-XX is available in TO-252 and TO-263 packages. A minimum of 220µF tantalum electrolytic capacitor is required at the output to improve the transient response and stability. Ordering Information ORDER NUMBER ORDER NUMBER MARKING (Pb free) TEMP. RANGE PACKAGE 1 PIN OPTION 2 3 G1084-15T43U G1084-15T43Uf G1084-15 -40°C to +85°C TO-252 GND VOUT VIN G1084-18T43U G1084-25T43U G1084-18T43Uf G1084-25T43Uf G1084-18 G1084-25 -40°C to +85°C -40°C to +85°C TO-252 TO-252 GND GND VOUT VOUT VIN VIN G1084-33T43U G1084-15T53U G1084-33T43Uf G1084-15T53Uf G1084-33 G1084-15 -40°C to +85°C -40°C to +85°C TO-252 TO-263 GND GND VOUT VOUT VIN VIN G1084-18T53U G1084-18T53Uf G1084-18 -40°C to +85°C TO-263 GND VOUT VIN G1084-25T53U G1084-33T53U G1084-25T53Uf G1084-33T53Uf G1084-25 G1084-33 -40°C to +85°C -40°C to +85°C TO-263 TO-263 GND GND VOUT VOUT VIN VIN * For other package types and pin options, please contact us at [email protected] Order Number Identification GXXXX-XX XX X X Packing Type Pin Option Package Type Voltage Part Number PACKAGE TYPE T4: TO-252 T5: TO-263 PIN OPTION 3: 1 GND 2 VOUT PACKING 3 VIN Package Type U: Tape & Reel Typical Application [Note 4]: Type of COUT G1084-XX VIN VOUT VIN IO VOUT GND Top View C1 220µF COUT 220µF 1 3 2 TO-252、 TO-263 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.6 Preliminary Apr 27, 2006 1 G1084-XX Global Mixed-mode Technology Inc. Absolute Maximum Ratings (Note 1) Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8V Power Dissipation Internally Limited (Note 2) Maximum Junction Temperature . . . . . . . . . . . . . . .150°C Storage Temperature Range . . . . .-65°C ≤ TJ ≤+150°C Reflow Temperature (soldering, 10sec) . . . . . . 260°C Thermal Resistance Junction to Ambient TO-252(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95°C/W TO-263(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C/W Thermal Resistance Junction to Case TO-252 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8°C/W TO-263 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6°C/W ESD Rating (Human Body Model) . . . . . . . . . . . . .2kV Operating Conditions (Note 1) Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . .2.2V~7V Temperature Range . . . . . . . . . . . . . -40°C ≤ TA ≤85°C Note (1): See Recommended Minimum Footprint Electrical Characteristics VIN = 5V, CIN = COUT = 220µF, TA = TJ = 25°C unless otherwise specified. (Note3) PARAMETER Output Voltage Line Regulation Load Regulation Dropout Voltage Current Limit Short Circuit Current Quiescent Current Ripple Rejection Thermal Shutdown CONDITION 10mA < IOUT < 5A (VOUT + 0.7V) < VIN < 5.5V, IOUT = 10mA G1084-18 VIN = 3.8V, 10mA < IOUT < 5A G1084-25 VIN = 5V, 10mA < IOUT < 5A G1084-33 VIN = 5V, 10mA < IOUT < 5A G1084-18 ΔVOUT = 2%, IOUT = 5A G1084-25 ΔVOUT = 2%, IOUT = 5A G1084-33 ΔVOUT = 2%, IOUT = 5A (VIN - VOUT) = 2V G1084-18 VIN = 5V G1084-25 VIN = 5V G1084-33 VIN = 5V f = 120Hz, COUT = 10µF Tantalum, (VIN - VOUT) = 3V, IOUT = 1A Junction Temperature MIN TYP MAX UNIT -2% --- VO 0.1 2% --- V % --- 1 --- % ----------------- 1.6 1.3 1.1 5.5 1 1.7 2.1 2.4 ----------------- --- 50 --- dB --- 150 --- °C V A A mA Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specifications might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. Note2: The maximum power dissipation is a function of the maximum junction temperature, TJmax ; total thermal resistance, θJA, and ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is Tjmax-TA / θJA. If this dissipation is exceeded, the die temperature will rise above 150°C and IC will go into thermal shutdown. Note3: Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. Note4: The type of output capacitor should be tantalum or aluminum. Definitions Dropout Voltage The input/output Voltage differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 2% below its nominal value. Dropout voltage is affected by junction temperature, load current and minimum input supply requirements. Load Regulation The change in output voltage for a change in load current at constant chip temperature. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Maximum Power Dissipation The maximum total device dissipation for which the regulator will operate within specifications. Line Regulation The change in output voltage for a change in input voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Quiescent Bias Current Current which is used to operate the regulator chip and is not delivered to the load. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.6 Preliminary Apr 27, 2006 2 G1084-XX Global Mixed-mode Technology Inc. Typical Performance Characteristics VIN-VOUT = 3V, CIN = 220µF, COUT = 220µF, TA=25°C, unless otherwise noted. Line Transient Response Load Transient Response Short Circuit Current Ripple Rejection 70 Ripple Rejection (dB) 60 IL=1A 50 40 IL=2A 30 IL=3A 20 10 0 10 100 1000 10000 100000 1000000 Frequency (Hz) G1084-33 Overcurrent Protection Characteristics G1084 Start-up TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.6 Preliminary Apr 27, 2006 3 G1084-XX Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G1084-18 Overcurrent Protection Characteristics G1084-18 Start-up G1084 Max. Power Dissipation vs. TAMB Unit : in2 4.5 4.5 4 4 A=0.5 3.5 A=1.0 Max. Dissipation Power (W) Max. Dissipation Power (W) G1084 Max. Power Dissipation vs. PCB Top Copper Area 3.5 3 2.5 2 1.5 1 A=1.5 3 A=2.0 2.5 A=2.5 2 A=3.0 1.5 A=3.5 A=4.0 1 A=4.5 0.5 0.5 0 0 0.5 1.5 2.5 3.5 PCB Top Copper Area (in2) 4.5 A=5.0 25 35 45 55 65 75 85 TAMB (°C) G1084-18 Quiescent Current vs. Temperature G1084-18 Dropout Voltage vs. IL 3.0 2.0 1.8 1.6 2.5 Dropout Voltage (V) Quiescent Current (mA) IL=10mA 2.0 1.5 V IN=4V 1.4 1.2 1.0 TA=85°C 0.8 TA=25°C 0.6 0.4 V IN=5V TA=-25°C 0.2 1.0 0.0 -25 -15 -5 5 15 25 35 45 55 65 75 85 Temperature ( °C) 1 1.5 2 2.5 3 3.5 IL (A) 4 4.5 5 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.6 Preliminary Apr 27, 2006 4 G1084-XX Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G1084-18 Output Voltage vs. Temperature G1084-18 Output Voltage vs. IL 1.824 1.825 IL=10mA 1.814 Output Voltage (V) Output Voltage (V) 1.820 1.815 1.810 V IN=5V V IN=4V 1.805 V IN=5V 1.804 1.794 V IN=4V 1.784 TA =25°C 1.774 1.800 1.764 5 15 25 35 45 55 65 75 0 85 0.5 1 1.5 2 Temperature ( °C) G1084-33 Quiescent Current vs. Temperature 2.5 3 IL (A) 3.5 4 4.5 5 G1084-33 Dropout Voltage vs. I L 1400 4.0 Dropout Voltage (mV) Quiescent Current (mA) 1200 3.5 V IN=6V 3.0 2.5 V IN=5V 5 800 TA =85°C 600 TA =25°C 400 200 TA =-25°C 0 1.0 2.0 -25 -15 -5 1000 15 25 35 45 55 65 75 85 1.5 2.0 2.5 Temperature (°C) G1084-33 Output Voltage vs. Temperature 4.0 4.5 5.0 G1084-33 Output Voltage vs. IL 3.334 3.334 3.314 TA =25°C 3.314 V IN=6V Output Voltage (V) Output Voltage (V) 3.0 3.5 IL (A) 3.294 3.274 V IN=5V 3.254 V IN=6V 3.294 3.274 V IN=5V 3.254 IL=200mA 3.234 3.234 -25 -5 15 35 55 75 0 1 2 3 4 5 IL (A) Temperature (°C) TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.6 Preliminary Apr 27, 2006 5 G1084-XX Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G1084-25 Quiescent Current vs. Temperature G1084-25 Dropout Voltage vs. IL 3.50 1800 1600 1400 Dropout Voltage (mV) Quiescent Current (mA) 3.00 V IN=6V 2.50 2.00 V IN=5V 1200 1000 800 TA =85°C 600 TA =25°C 400 1.50 TA =-25°C 200 1.00 0 -25 -15 -5 5 15 25 35 45 55 65 75 85 1 2 3 Temperature ( °C) G1084-25 Output Voltage vs. IL 2.55 2.59 2.54 2.57 TA=25°C 2.53 Output Voltage (V) Output Voltage (V) 5 IL (A) G1084-25-Output Voltage vs. Temperature 2.55 2.53 2.51 V IN=4V 2.49 V IN=5V 2.52 2.51 2.5 2.49 V IN=4V 2.48 V IN=5V 2.47 IL=10mA 2.47 2.45 -25 4 2.46 2.45 -5 15 35 55 Temperature ( °C) 0 75 1 2 3 4 5 IL (A) Recommend Minimum Footprint TO-252 TO-263 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.6 Preliminary Apr 27, 2006 6 G1084-XX Global Mixed-mode Technology Inc. Package Information E A F E1 L1 H D L2 A1 L3 θ b e C e1 TO-252 (T4) Package SYMBOL MILLIMETER INCH MIN. MAX. MIN. MAX. A A1 2.19 0.89 2.38 1.27 0.086 0.035 0.094 0.050 b C 0.64 0.46 0.89 0.58 0.025 0.018 0.035 0.023 D E 5.97 6.35 6.22 6.73 0.235 0.250 0.245 0.265 E1 e e1 F L1 5.21 5.46 0.205 3.96 0.46 0.89 5.18 0.58 2.03 0.156 0.018 0.035 0.204 0.023 0.080 L2 L3 0.64 2.40 1.02 2.80 0.025 0.095 0.040 0.110 H 9.40 0° 10.40 4° 0.370 0° 0.410 4° θ 2.26BSC 0.215 0.09BSC TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.6 Preliminary Apr 27, 2006 7 G1084-XX Global Mixed-mode Technology Inc. A E A1 L3 D H C L1 L e L2 A2 e1 b b1 TO-263 (T5) Package SYMBOL A A1 A2 b b1 C D E e e1 H L L1 L2 L3 MILLIMETER INCH MIN MAX MIN MAX 4.30 1.22 2.45 0.69 1.22 0.36 8.64 9.70 2.29 4.83 14.60 4.70 1.20 2.24 4.70 1.32 2.69 0.94 1.40 0.56 9.652 10.54 2.79 5.33 15.78 5.84 1.778 2.84 0.169 0.048 0.104 0.027 0.048 0.014 0.340 0.382 0.090 0.190 0.575 0.185 0.047 0.088 0.185 0.055 0.106 0.037 0.055 0.022 0.380 0.415 0.110 0.210 0.625 0.230 0.070 0.111 1.40MAX 0.055MAX Taping Specification Feed Direction TO-252 Package Orientation PACKAGE Q’TY/REEL TO-252 2,500 ea TO-263 800 ea Feed Direction TO-263 Package Orientation GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 0.6 Preliminary Apr 27, 2006 8