Mobile RF: LPC CP1/CP2 T he LPC CP1/CP2 RF switchable connectors are ideal for small handsets and offer high performance in a very compact design and a unique cold pin to minimize the RF emissions in unmated conditions. Applications: • Antenna Interconnect for Satellite TV • • • Receiver Mobile Phones PDA Portable Radio For more information: www.ittcannon.com/cat264 Product Features • Cold pin to minimize RF emissions in • • 0.2 g weight. • 100% checked on assembly. unmated conditions. Low profile of 5,6 mm. • Seal to prevent dust and water penetration. • Standard tape and reel packaging. Performance Specifications Mobile Connector Durability Corrosive Atmosphere Frequency Range Humidity Impedance Insertion Loss Mating Force Maximum Dimensions Offset Mating Operating Temperature Packaging Salt Spray Shock Solder System Vibration VSWR 12,000 mating cycles min. Battele class II 0.8 to 2 GHz Operable in 90% relative humidity, temp. 40°C (104°F) 50 Ω nominal at 0.8 to 2 GHz <0.1 dB >4 N and <7 N (when mated with plug) 3.5 x 5.1 x 5.6 mm (H x W x D) 0.95 mm –40°C to 85°C (–40°F to 185°F) Tape and Reel, 13 in. Reel, 1000 pieces per reel In accordance with IEC 68-2-11, Method Ka 105 g (force) 6 directions over 3 axis Hand soldering, Infrared reflow soldering 3 dB/octave 20 to 80 Hz 0.53 g 2/Hz 80 to 350 Hz 3 dB/octave 350 to 2000 Hz at 2000 MHz ≤1.2:1 Materials and Finishes Description Shell Insulator Contact, Fixed Contact, Moving Cold Pin Gasket Material Brass LPC Resin Brass Beryllium Copper Brass Silicone Rubber Finish Gold Color: Black Gold Gold Gold Color: Black Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs Dimensions are shown in mm (inch) Dimensions subject to change Version 05.01.03 M-10 www.ittcannon.com