MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# MR2400FR THRU MR2410FR Features • • • • • • • Glass Passivated Die Low Forward Voltage Drop High Current Capability High Surge Current Low Leakage Anode To Tab Configuration Marking : Type Number 24 Amp Fast Recovery Rectifiers 50-1000 Volt Maximum Ratings • , )- '"65°/150° • )- '"65°/!.° • Thermal Resistance Juncetion to Case (Rthjc):0.8°C/W 5'6 %' 0' (07 8 ) %' 08 ) %'9 *() 8 ) MR2400FR 50V 35V 50V MR2401FR 100V 70V 100V MR2402FR 200V 140V 200V MR2404FR 400V 280V 400V MR2406FR 600V 420V 600V MR2408FR 800V 560V 800V MR2410FR 1000V 700V 1000V TO-220 Button Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time Typical Junction Capacitance IF(AV) 24.0A Ta =125°C IFSM 300A 8.3ms, half sine DIMENSIONS INCHES VF 1.15V IR 25µA 1.0mA Tc = 25°C Tc = 100°C Trr 100ns to. 250ns. 95pF IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V CJ IFM = 24.0A; Ta= 25°C* ! " M M *Pulse test: Pulse width 300 µsec, Duty cycle 1% www.mccsemi.com Revision: 4 1 of 4 2006/12/19 MCC MR2400FR thru MR2410FR TM Micro Commercial Components Figure 1 Typical Forward Characteristics 100 60 Figure 2 Forward Derating Curve 40 30 20 25 10 6 20 4 15 2 Amps 25°C Amps 1 10 .6 5 .4 .2 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 25 0 50 75 100 125 150 .1 °C .06 Average Forward Rectified Current - Amperesversus Ambient Temperature - °C .04 .02 .01 .5 .6 .7 .8 .9 1.0 1.1 Volts Instantaneous Forward Current - Amperes Instantaneous Forward Voltage - Volts Figure 3 Maximum Non-Repetitive Forward Surge Current 300 250 200 150 Amps 100 50 0 1 2 4 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles www.mccsemi.com Revision: 4 2006/12/19 MCC MR2400FR thr MR2410FR TM Figure 4 Typical Reverse Characteristics Micro Commercial Components 300 200 150 100 60 40 20 TJ=25°C µAmps 10 6 4 2 1 .6 .4 .2 .1 20 40 60 80 100 120 140 Volts Instantaneous Reverse Leakage Current - MicroAmperesversus Percent Of Rated Peak Reverse Voltage - Volts Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 25Vdc 1Ω Pulse Generator Note 2 -0.25 -1.0 Oscilloscope Note 1 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive www.mccsemi.com Revision: 4 3 of 4 2006/12/19 MCC TM Micro Commercial Components ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 4 4 of 4 2006/12/19