SY10E122 SY100E122 9-BIT BUFFER Micrel, Inc. FEATURES SY10E122 SY100E122 DESCRIPTION ■ 500ps max. propagation delay ■ Extended 100E VEE range of –4.2V to –5.5V ■ Fully compatible with industry standard 10KH, 100K I/O levels ■ Internal 75KΩ input pulldown resistors ■ Fully compatible with Motorola MC10E/100E122 ■ Available in 28-pin PLCC package The SY10/100E122 are 9-bit buffers designed for use in new, high-performance ECL systems. The E122 provides nine non-inverting buffers. PIN NAMES BLOCK DIAGRAM Pin D0 Q0 D1 Q1 D2 Q2 D3 Q3 D4 Q4 D5 Q5 D6 Q6 D7 Q7 D8 Q8 M9999-032006 [email protected] or (408) 955-1690 1 Function D0-D8 Data Inputs Q0-Q8 Data Outputs VCCO VCC to Output Rev.: G Amendment: /0 Issue Date: March 2006 SY10E122 SY100E122 Micrel, Inc. 25 D7 23 21 Q8 20 Ordering Information(1) VCCO NC 22 NC NC 24 NC D8 PACKAGE/ORDERING INFORMATION Part Number Package Type Operating Range Package Marking Lead Finish Q7 SY10E122JI J28-1 Industrial SY10E122JI Sn-Pb 19 18 26 D6 27 17 Q6 SY10E122JITR(2) J28-1 Industrial SY10E122JI Sn-Pb D5 28 16 VCC SY100E122JI J28-1 Industrial SY100E122JI Sn-Pb VEE D4 1 15 Q5 2 14 J28-1 Industrial SY100E122JI Sn-Pb D3 3 13 Q4 VCCO SY100E122JITR(2) SY10E122JC J28-1 Commercial SY10E122JC Sn-Pb D2 4 12 Q3 7 8 9 D0 NC Q0 Q1 10 11 Q2 6 VCCO 5 D1 PLCC TOP VIEW J28-1 28-Pin PLCC (J28-1) SY10E122JCTR(2) J28-1 Commercial SY10E122JC Sn-Pb SY100E122JC J28-1 Commercial SY100E122JC Sn-Pb SY100E122JCTR(2) J28-1 Commercial SY100E122JC Sn-Pb SY10E122JY(3) J28-1 Industrial SY10E122JY with Pb-Free bar-line indicator Matte-Sn SY10E122JYTR(2, 3) J28-1 Industrial SY10E122JY with Pb-Free bar-line indicator Matte-Sn SY100E122JY(3) J28-1 Industrial SY100E122JY with Pb-Free bar-line indicator Matte-Sn SY100E122JYTR(2, 3) J28-1 Industrial SY100E122JY with Pb-Free bar-line indicator Matte-Sn Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032006 [email protected] or (408) 955-1690 2 SY10E122 SY100E122 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = –40°C Symbol Parameter TA = 0°C Min. Typ. Max. Min. Typ. IIH Input HIGH Current IEE Power Supply Current 10E 100E TA = +25°C TA = +85°C Max. Min. Typ. Max. Min. Typ. Max. Unit µA — — 200 — — 200 — — 200 — — 200 — — 41 41 49 49 — — 41 41 49 49 — — 41 41 49 49 — — 41 47 49 57 mA AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = –40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit tPD Propagation Delay to D to Q 150 350 500 150 350 500 150 350 500 150 350 500 ps tskew Within-Device Skew D to Q(1) — 75 — — 75 — — 75 — — 75 — ps tr tf Rise/Fall Time 20% to 80% 300 425 800 300 425 800 300 425 800 300 425 800 ps Note: 1. Within-device skew is defined as identical transitions on similar paths through a device. M9999-032006 [email protected] or (408) 955-1690 3 SY10E122 SY100E122 Micrel, Inc. 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-032006 [email protected] or (408) 955-1690 4