Micrel, Inc. SY100E157 SY10E157 SY100E157 DESCRIPTION FEATURES ■ Individual select controls ■ Extended 100E VEE range of –4.2V to –5.5V The SY10/100E157 contain four 2:1 multiplexers with differential outputs. The output data are controlled by the individual Select (SEL) inputs. The individual select control makes the devices well suited for random logic designs. ■ ■ ■ ■ 550ps max. D to Output 800ps max. SEL to Output Internal 75KΩ input pull-down resistors Fully compatible with industry standard 10KH, 100K ECL levels ■ Available in 28-pin PLCC package PIN NAMES BLOCK DIAGRAM Pin M9999-032006 [email protected] or (408) 955-1690 SY10E157 QUAD 2:1 MULTIPLEXER 1 Function D0a – D3a Input Data a D0b – D3b Input Data b SEL0 – SEL3 Select Inputs Q0 – Q3 True Outputs Q0 – Q3 Inverted Outputs VCCO VCC to Output Rev.: G Amendment: /0 Issue Date: March 2006 SY10E157 SY100E157 Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) 28-Pin PLCC (J28-1) Part Number Package Type Operating Range Package Marking Lead Finish SY10E157JI J28-1 Industrial SY10E157JI Sn-Pb SY10E157JITR(2) J28-1 Industrial SY10E157JI Sn-Pb SY100E157JI J28-1 Industrial SY100E157JI Sn-Pb SY100E157JITR(2) J28-1 Industrial SY100E157JI Sn-Pb SY10E157JC J28-1 Commercial SY10E157JC Sn-Pb SY10E157JCTR(2) J28-1 Commercial SY10E157JC Sn-Pb SY100E157JC J28-1 Commercial SY100E157JC Sn-Pb SY100E157JCTR(2) J28-1 Commercial SY100E157JC Sn-Pb SY10E157JY(3) J28-1 Industrial SY10E157JY with Matte-Sn Pb-Free bar-line indicator SY10E157JYTR(2, 3) J28-1 Industrial SY10E157JY with Matte-Sn Pb-Free bar-line indicator SY100E157JY(3) J28-1 Industrial SY100E157JY with Matte-Sn Pb-Free bar-line indicator SY100E157JYTR(2, 3) J28-1 Industrial SY100E157JY with Matte-Sn Pb-Free bar-line indicator Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032006 [email protected] or (408) 955-1690 2 SY10E157 SY100E157 Micrel, Inc. TRUTH TABLE SEL Data H a L b DC ELECTRICAL CHARACTERISTICS(1) VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = –40°C Symbol IIH IEE Parameter TA = 0°C Min. Typ. Max. Min. Typ. TA = +25°C TA = +85°C Max. Min. Typ. Max. Min. Typ. Max. Unit µA Input HIGH Current D SEL — — — — 200 150 — — — — 200 150 — — — — 200 150 — — — — 200 150 10E 100E — — 32 32 38 38 — — 32 32 38 38 — — 32 32 38 38 — — 32 37 38 44 Power Supply Current mA Note: 1. Specification for packaged product only. AC ELECTRICAL CHARACTERISTICS(2) VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = –40°C TA = 0°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Propagation Delay to D SEL 220 425 380 600 550 800 220 425 380 600 550 800 220 425 380 600 550 800 220 425 380 600 550 800 tskew Within-Device Skew(1) — 70 — — 70 — — 70 — — 70 — ps tr tf Rise/Fall Time 20% to 80% 275 400 650 275 400 650 275 400 650 275 400 650 ps Symbol tPD Parameter TA = +25°C Unit ps Notes: 1. Within-device skew is defined as identical transitions on similar paths through a device. 2. Specification for packaged product only. M9999-032006 [email protected] or (408) 955-1690 TA = +85°C 3 SY10E157 SY100E157 Micrel, Inc. 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-032006 [email protected] or (408) 955-1690 4