Micrel, Inc. SY10EL07 SY100EL07 SY10EL07 2-INPUT XOR/XNOR FEATURES SY100EL07 DESCRIPTION ■ 260ps propagation delay ■ High bandwidth output transitions ■ Internal 75KΩ input pull-down resistors The SY10/100EL07 are 2-input XOR/XNOR gates. These devices are functionally equivalent to the E107 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster than the E107, the EL07 is ideally suited for those applications which require the ultimate in AC performance. ■ Available in 8-pin SOIC package PIN NAMES Pin M9999-031006 [email protected] or (408) 955-1690 Function D0, D1 Data Inputs Q Data Outputs Rev.: G 1 Amendment: /0 Issue Date: March 2006 SY10EL07 SY100EL07 Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) NC 1 8 VCC D0 2 7 Q D1 3 6 Q NC 4 5 8-Pin SOIC (Z8-1) VEE Part Number Package Type Operating Range Package Marking SY10EL07ZC Z8-1 Commercial HEL07 Sn-Pb SY10EL07ZCTR(2) Z8-1 Commercial HEL07 Sn-Pb SY100EL07ZC Z8-1 Commercial XEL07 Sn-Pb SY100EL07ZCTR(2) Z8-1 Commercial XEL07 Sn-Pb SY10EL07ZI Z8-1 Industrial HEL07 Sn-Pb SY10EL07ZITR(2) Z8-1 Industrial HEL07 Sn-Pb SY100EL07ZI Z8-1 Industrial XEL07 Sn-Pb SY100EL07ZITR(2) Z8-1 Industrial XEL07 Sn-Pb SY10EL07ZG(3) Z8-1 Industrial HEL07 with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EL07ZGTR(2, 3) Z8-1 Industrial HEL07 with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL07ZG(3) Z8-1 Industrial XEL07 with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL07ZGTR(2, 3) Z8-1 Industrial XEL07 with Pb-Free bar-line indicator Pb-Free NiPdAu Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-031006 [email protected] or (408) 955-1690 Lead Finish 2 SY10EL07 SY100EL07 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = –40°C Symbol IEE VEE IIH Parameter Power Supply Current 10EL 100EL TA = 0°C TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. — — 14 14 17 17 11 11 14 14 17 17 11 11 14 14 17 17 11 13 14 16 17 20 –5.2 –4.5 –5.5 –5.5 –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 — — 250 150 — — — — 250 150 — — — — 250 150 — — — — 250 150 Unit mA Power Supply Voltage 10EL –4.75 100EL –4.20 V µA Input HIGH Current D0 D1 — — AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = –40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit tPD Propagation Delay to Output D 90 250 435 140 250 385 150 260 395 170 280 415 ps tr tf Output Rise/Fall Times Q 100 (20% to 80%) 225 350 100 225 350 100 225 350 100 225 350 ps M9999-031006 [email protected] or (408) 955-1690 3 SY10EL07 SY100EL07 Micrel, Inc. 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-031006 [email protected] or (408) 955-1690 4