June /2004 MITSUBISHI SEMICONDUCTOR <GaAs FET> MGF1952A Microwave Power MES FET (Leadless Ceramic Package) DESCRIPTION Outline Drawing The MGF1952A is designed for use in S to Ku band power amplifiers. The lead-less ceramic package assures minimum parasitic losses. FEATURES High gain and High P1dB Glp=7.0dB , P1dB=17dBm (Typ.) @ f=12GHz Fig.1 APPLICATION S to Ku band power Amplifiers QUALITY GRADE GG ORDERING INFORMATION Tape & reel 3000pcs./reel Keep Safety first in your circuit designs! ABSOLUTE MAXIMUM RATINGS Symbol VGDO VGSO Parameter Gate to drain voltage Gate to source voltage (Ta=25°C ) Ratings Unit -8 V -8 V ID Drain current 240 mA PT Tch Total power dissipation 600 mW Channel temperature 125 °C Tstg Storage temperature -65 to +125 °C ELECTRICAL CHARACTERISTICS Synbol V(BR)GDO IDSS VGS(off) P1dB Glp Parameter Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable , but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury , fire or property damage. Remember to give due consideration to safety when making your circuit designs , with appropriate measure such as (I) placement of substitutive , auxiliary circuits , (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap. (Ta=25°C ) Test conditions Limits Unit MIN. TYP. -8 -15 MAX -- V 65 120 240 mA Saturated drain current Ig=-60µA VGS=0V,VDS=3V Gate to source cut-off voltage VDS=3V,ID=600µA -0.3 -1.4 -3.5 V Output Power at 1dB gain VDS=3V,ID=60mA 15 17 -- dBm Compression f=12GHz VDS=3V,ID=60mA 5 7 -- dB Gate to drain breakdown voltage Linear Power Gain f=12GHz,Pin=-5dBm MITSUBISHI (1/5) June /2004 June /2004 MITSUBISHI SEMICONDUCTOR <GaAs FET> MGF1952A Microwave Power MES FET (Leadless Ceramic Package) Fig.1 Unit : mm Top Side Bottom 2. 1. 3. ➂ ç D 2 4AA © 1. ➀ ➁ 2. © ç 2. 2. ➁ 3. ç ç ç Square shape electrode is Drain from "A" side view 1. Gate 2. Source 3. Drain MITSUBISHI (2/5) June /2004 June /2004 MITSUBISHI SEMICONDUCTOR <GaAs FET> MGF1952A Microwave Power MES FET (Leadless Ceramic Package) TYPICAL CHARACTERISTICS (Ta=25°C) I D vs. VDS Ta=25deg.C VGS=-0.2V/STEP 180 Ta=25deg.C VDS=3V DRAIN CURRENTID(mA) 160 DRAIN CURRENT ID(mA) I D vs. VGS 200 VGS=0V 140 120 100 80 60 40 20 0 0.0 1.0 2.0 3.0 4.0 5.0 -3.0 DRAIN TO SOURCE VOLTAGE V DS(V) -2.5 -2.0 -1.5 -1.0 -0.5 0.0 GATE TO SOURCE VOLTAGE V GS(V) §ÆwÍ Ê w§ÀÅ «¸ »¼ ¾ ª Ä ½ Ñ §Æ w »Ä §À Å w »Ä MITSUBISHI (3/5) June /2004 June /2004 MITSUBISHI SEMICONDUCTOR <GaAs FET> MGF1952A Microwave Power MES FET (Leadless Ceramic Package) S PARAMETERS f (GHz) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S11 Mag. Angle 0.963 -32.6 0.888 -66.5 0.822 -89.7 0.764 -114.3 0.720 -132.8 0.685 -149.2 0.660 -165.2 0.643 -179.8 0.629 165.3 0.624 150.0 0.618 133.3 0.620 115.8 0.639 98.6 0.670 81.9 0.709 66.3 0.765 52.1 0.815 37.9 0.850 25.1 S21 Mag. Angle 6.695 154.5 6.024 128.4 5.294 110.6 4.599 93.5 4.030 79.6 3.591 67.1 3.243 54.4 2.993 42.2 2.785 30.5 2.614 18.5 2.460 6.4 2.310 -6.9 2.163 -19.8 2.017 -33.9 1.846 -47.2 1.700 -60.1 1.537 -73.9 1.353 -88.1 (Conditions : VDS=3V,ID=60mA,Ta=25deg.C) MAG/MSG S12 S22 K Mag. Angle Mag. Angle (dB) 0.024 72.0 0.314 -24.7 0.21 24.4 0.043 52.3 0.297 -51.3 0.38 21.4 0.056 42.0 0.281 -66.0 0.51 19.7 0.065 32.3 0.259 -83.0 0.64 18.5 0.071 24.2 0.254 -94.1 0.77 17.5 0.075 19.2 0.250 -100.0 0.90 16.8 0.079 14.0 0.247 -104.2 1.01 15.5 0.082 9.4 0.243 -108.3 1.10 13.7 0.088 4.4 0.232 -111.5 1.15 12.6 0.095 -0.8 0.214 -115.4 1.17 11.9 0.099 -8.3 0.179 -119.8 1.25 11.0 0.104 -14.8 0.137 -125.6 1.29 10.2 0.107 -21.6 0.085 -134.3 13.27 9.6 0.111 -30.5 0.025 -176.9 1.32 9.2 0.113 -39.4 0.063 61.7 1.33 8.7 0.113 -48.6 0.145 47.0 1.25 8.8 0.112 -57.5 0.237 37.8 1.18 8.8 0.109 -67.0 0.328 29.2 1.16 8.5 Gate Source Reference Point Reference Point Drain Source MITSUBISHI (4/5) June /2004 June /2004 MITSUBISHI SEMICONDUCTOR <GaAs FET> MGF1952A Microwave Power MES FET (Leadless Ceramic Package) Requests Regarding Safety Designs Mitsubishi Electric constantly strives to raise the level of its quality and reliability. Despite these concerted efforts, however, there will be occasions when our semiconductor products suffer breakdowns, malfunctions or other problems. In view of this reality, it is requested that every feasible precaution be taken in the pursuit of redundancy design, malfunction prevention design and other safety-related designs, to prevent breakdowns or malfunctions in our products from resulting in accidents involving people, fires, social losses or other problems, thereby upholding the highest levels of safety in the products when in use by customers. Matters of Importance when Using these Materials 1. These materials are designed as reference materials to ensure that all customers purchase Mitsubishi Electric semiconductors best suited to their specific use applications. Please be aware, however, that the technical information contained in these materials does not comprise consent for the execution or use of intellectual property rights or other rights owned by Mitsubishi Electric Corporation. 2. Mitsubishi Electric does not assume responsibility for damages resulting from the use of product data, graphs, charts, programs, algorithms or other applied circuit examples described in these materials, or for the infringement of the rights of third-party owners resulting from such use. 3. The data, graphs, charts, programs, algorithms and all other information described in these materials were current at the issue of these materials, with Mitsubishi Electric reserving the right to make any necessary updates or changes in the products or specifications in these materials without prior notice. Before purchasing Mitsubishi Electric semiconductor products, therefore, please obtain the latest available information from Mitsubishi Electric directly or an authorized dealer. 4. Every possible effort has been made to ensure that the information described in these materials is fully accurate. However, Mitsubishi Electric assumes no responsibility for damages resulting from inaccuracies occurring within these materials. 5. When using the product data, technical contents indicated on the graphs, charts, programs or algorithms described in these materials, assessments should not be limited to only the technical contents, programs and algorithm units. Rather, it is requested that ample evaluations be made of each individual system as a whole, with the customer assuming full responsibility for decisions on the propriety of application. Mitsubishi Electric does not accept responsibility for the propriety of application. 6. The products described in these materials, with the exception of special mention concerning use and reliability, have been designed and manufactured with the purpose of use in general electronic machinery. Accordingly these products have not been designed and manufactured with the purpose of application in machinery or systems that will be used under conditions that can affect human life, or in machinery or systems used in social infrastructure that demand a particularly high degree of reliability. When considering the use of the products described in these materials in transportation machinery (automobiles, trains, vessels), for objectives related to medical treatment, aerospace, nuclear power control, submarine repeaters or systems or other specialized applications, please consult with Mitsubishi Electric directly or an authorized dealer. 7. When considering use of products for purposes other than the specific applications described in these materials, please inquire at Mitsubishi Electric or an authorized dealer. 8. The prior consent of Mitsubishi Electric in writing is required for any reprinting or reproduction of these materials. 9. Please direct any inquiries regarding further details of these materials, or any other comments or matters of attention, to Mitsubishi Electric or an authorized dealer. MITSUBISHI (5/5) June /2004