RC4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER www.ti.com SLOS073E – MARCH 1976 – REVISED FEBRUARY 2006 FEATURES • • • • • • • • D, DGK, P, PS, OR PW PACKAGE (TOP VIEW) Continuous Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Unity-Gain Bandwidth . . . 3 MHz Typ Gain and Phase Match Between Amplifiers Low Noise . . . 8 nV/√Hz Typ at 1 kHz 1OUT 1IN− 1IN+ VCC− 1 8 2 7 3 6 4 5 VCC+ 2OUT 2IN− 2IN+ DESCRIPTION/ORDERING INFORMATION The RC4558 device is a dual general-purpose operational amplifier, with each half electrically similar to the µA741, except that offset null capability is not provided. The high common-mode input voltage range and the absence of latch-up make this amplifier ideal for voltage-follower applications. The device is short-circuit protected, and the internal frequency compensation ensures stability without external components. ORDERING INFORMATION PACKAGE (1) TA 0°C to 70°C RC4558DGKR YR_ (2) PDIP – P Tube of 50 RC4558P RC4558P Tube of 75 RC4558D Reel of 2500 RC4558DR Reel of 2000 RC4558PSR Tube of 150 RC4558PW Reel of 2000 RC4558PWR MSOP/VSSOP – DGK Reel of 2500 RC4558IDGKR YS_ (2) PDIP – P Tube of 50 RC4558IP RC4558IP Tube of 75 RC4558ID Reel of 2500 RC4558IDR Tube of 150 RC4558IPW Reel of 2000 RC4558IPWR SOIC – D TSSOP – PW SOIC – D TSSOP – PW (1) (2) TOP-SIDE MARKING Reel of 2500 SOP – PS –40°C to 85°C ORDERABLE PART NUMBER MSOP/VSSOP – DGK RC4558 R4558 R4558 R4558I R4558I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. The actual top-side marking has one additional character that designates the assembly/test site. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1976–2006, Texas Instruments Incorporated RC4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER www.ti.com SLOS073E – MARCH 1976 – REVISED FEBRUARY 2006 SCHEMATIC (EACH AMPLIFIER) VCC+ IN− IN+ OUT VCC− 2 Submit Documentation Feedback RC4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER www.ti.com SLOS073E – MARCH 1976 – REVISED FEBRUARY 2006 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN VCC+ VCC– MAX 18 Supply voltage (2) –18 UNIT V VID Differential input voltage (3) ±30 V VI Input voltage (any input) (2) (4) ±15 V Duration of output short circuit to ground, one amplifier at a time (5) Unlimited D package 97 DGK package θJA Package thermal impedance (6) (7) TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) (4) (5) (6) (7) 172 P package 85 PS package 95 PW package 149 –65 °C/W 150 °C 150 °C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC–. Differential voltages are at IN+ with respect to IN–. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. Maximum power dissipation is a function of TJ (max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ (max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions MIN VCC+ VCC– TA 5 15 –5 –15 RC4558 0 70 RC4558I –40 85 Supply voltage Operating free-air temperature Submit Documentation Feedback MAX UNIT V °C 3 RC4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER www.ti.com SLOS073E – MARCH 1976 – REVISED FEBRUARY 2006 Electrical Characteristics at specified free-air temperature, VCC+ = 15 V, VCC– = –15 V TEST CONDITIONS (1) PARAMETER VIO Input offset voltage VO = 0 IIO Input offset current VO = 0 IIB Input bias current VO = 0 VICR Common-mode input voltage range Maximum output voltage swing MIN 25°C TYP MAX 0.5 6 Full range 25°C 5 nA 300 25°C RL ≥ kΩ, VO = ±10 V mV 200 150 500 Full range RL = 2 kΩ UNIT 7.5 Full range RL = 10 kΩ VOM TA (2) nA 800 25°C ±12 ±14 25°C ±12 ±14 ±13 25°C ±10 Full range ±10 25°C 20 Full range 15 V V 300 AVD Large-signal differential voltage amplification B1 Unity-gain bandwith 25°C 3 MHz ri Input resistance 25°C 0.3 5 MΩ CMRR Common-mode rejection ratio 25°C 70 90 dB kSVS Vn ICC PD (1) (2) Supply-voltage sensitivity (∆VIO/∆VCC) VCC = ±15 V to ±9 V 25°C 30 Equivalent input noise voltage (closed loop) AVD = 100, RS = 100 Ω, f = 1 kHz, BW = 1 Hz 25°C 8 25°C 2.5 5.6 Supply current (both amplifiers) VO = 0, No load VO = 0, No load Total power dissipation (both amplifiers) VO1/VO2 V/mV Crosstalk attenuation Open loop AVD = 100 RS = 1 kΩ, f = 10 kHz µV/V 150 nV/√Hz TA min 3 6.6 TA max 2.3 5 25°C 75 170 TA min 90 200 TA max 70 150 85 25°C mA mW dB 105 All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise specified. Full range is 0°C to 70°C for RC4558 and –40°C to 85°C for RC4558I. Operating Characteristics VCC+ = 15 V, VCC– = –15 V, TA = 25°C PARAMETER tr SR 4 TEST CONDITIONS MIN Rise time VI = 20 mV, RL = 2 kΩ, CL = 100 pF Overshoot VI = 20 mV, RL = 2 kΩ, CL = 100 pF Slew rate at unity gain VI = 10 V, RL = 2 kΩ, CL = 100 pF Submit Documentation Feedback TYP 0.13 5 1.1 1.7 MAX UNIT ns % V/µs RC4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER www.ti.com SLOS073E – MARCH 1976 – REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs TEMPERATURE (VCC = ±15 V) 6 6 5 5 ICC – Supply Current – mA 4 3 2 1 4 3 2 1 0 0 2 4 6 8 10 12 14 16 18 0 -55 20 -35 -15 5 25 45 GAIN AND PHASE vs FREQUENCY (VCC = ±15 V, RL = 2 kΩ, CL = 22 pF) GAIN AND PHASE vs FREQUENCY (VCC = ±15 V, RL = 10 kΩ, CL = 22 pF) -20 30 -40 -60 -80 -100 10 Phase -120 -140 -160 -10 Gain – dB Gain -40 -60 20 Phase – deg 20 Gain 10 0 -200 10000 -80 -100 Phase -120 -140 -160 -10 -180 -180 1000 125 0 40 0 -20 Gain – dB 105 TA – Temperature – °C 30 -20 100 85 VCC – Supply Voltage – V 40 0 65 Phase – deg ICC – Supply Current – mA SUPPLY CURRENT vs SUPPLY VOLTAGE (TA = 25°C) -20 100 1000 -200 10000 f – Frequency – kHz f – Frequency – kHz Submit Documentation Feedback 5 RC4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER www.ti.com SLOS073E – MARCH 1976 – REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS (continued) OUTPUT VOLTAGE SWING vs FREQUENCY (VCC = ±15 V, RL = 2 kΩ, TA = 25°C) 15 30 10 25 VOM – Output Voltage Swing – V VOM – Output Voltage Swing – V OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE (RL = 2 kΩ, TA = 25°C) 5 0 -5 -10 -15 6 8 10 12 14 16 20 15 10 5 0 1.E+00 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 10 100 10k 100k 1.E+06 1 1k 1M 18 f – Frequency – Hz VCC – Supply Voltage – V OUTPUT VOLTAGE SWING vs LOAD RESISTANCE (VCC = ±15 V, TA = 25°C) OUTPUT VOLTAGE SWING vs TEMPERATURE (VCC = ±15 V, RL = 10 kΩ) 15 32 14.75 28 VOM – Output Voltage Swing – V VOM – Output Voltage Swing – V 30 26 24 22 20 18 16 14.5 14.25 14 13.75 13.5 13.25 14 12 100 1000 10000 13 -55 RloadR– –Load LoadResistance Resistance–– W -15 5 25 45 65 TA – Temperature – °C L 6 -35 Submit Documentation Feedback 85 105 125 RC4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER www.ti.com SLOS073E – MARCH 1976 – REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS (continued) NEGATIVE OUTPUT VOLTAGE SWING vs TEMPERATURE (VCC = ±15 V, RL = 10 kΩ) OPEN LOOP GAIN vs FREQUENCY (VCC = ±15 V, RL = 2 kΩ, CL = 22 pF, TA = 25°C) 120 -12 110 100 -12.5 G M – Open Loop Gain – dB –V OM – Output Voltage Swing – V -12.25 -12.75 -13 -13.25 -13.5 90 80 70 60 50 40 30 20 -13.75 10 -14 -55 -35 -15 5 25 45 65 85 0 100 1.E+02 105 125 1k 1.E+03 10k 1.E+04 100k 1.E+05 1M 1.E+06 10M 1.E+07 f – Frequency – Hz TA – Temperature – °C INPUT BIAS CURRENT vs TEMPERATURE (VCC = ±15 V) INPUT OFFSET VOLTAGE vs TEMPERATURE (VCC = ±15 V) 200 0.003 190 0.002 VIO – Input Offset Voltage – V IIB – Input Bias Current – nA 180 170 160 150 140 130 120 0.001 0 -0.001 -0.002 110 100 -55 -35 -15 5 25 45 65 85 105 125 -0.003 -55 -35 -15 5 25 45 65 85 105 125 TA – Temperature – °C TA – Temperature – °C Submit Documentation Feedback 7 RC4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIER www.ti.com SLOS073E – MARCH 1976 – REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS (continued) INPUT NOISE VOLTAGE vs FREQUENCY (VCC = ±15 V, TA = 25°C) – Input NoiseVoltage Voltage––nV/rt(Hz) nV/ÖHz Vn V–n Input Noise 14 12 10 8 6 4 2 0 10 1.E+01 100 1.E+02 1k 1.E+03 10k 1.E+04 f – Frequency – Hz 8 Submit Documentation Feedback 100k 1.E+05 PACKAGE OPTION ADDENDUM www.ti.com 27-May-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) RC4558D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558DGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558DGKRG4 ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558DRG3 PREVIEW SOIC D 8 2500 TBD Call TI Samples Not Available RC4558DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558IDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558IDGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558IDGKRG4 ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558IDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office Addendum-Page 1 Call TI PACKAGE OPTION ADDENDUM www.ti.com 27-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) RC4558IP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office RC4558IPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office RC4558IPW ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558IPWE4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558IPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558IPWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558IPWRE4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558IPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office RC4558PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Contact TI Distributor or Sales Office RC4558PSLE OBSOLETE SO PS 8 RC4558PSR ACTIVE SO PS 8 2000 RC4558PSRE4 ACTIVE SO PS 8 RC4558PSRG4 ACTIVE SO PS RC4558PW ACTIVE TSSOP RC4558PWE4 ACTIVE RC4558PWG4 TBD Call TI Samples Not Available Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples RC4558PWLE OBSOLETE TSSOP PW 8 RC4558PWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) TBD Addendum-Page 2 Call TI Call TI Samples Not Available CU NIPDAU Level-1-260C-UNLIM Call TI Contact TI Distributor or Sales Office PACKAGE OPTION ADDENDUM www.ti.com 27-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) RC4558PWRE4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558PWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office RC4558Y OBSOLETE DIESALE Y 0 TBD Call TI Call TI Samples Not Available (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 25-Jul-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant RC4558DGKR MSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 RC4558DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 RC4558DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 RC4558IDGKR MSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 RC4558IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 RC4558IPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 RC4558PSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 RC4558PWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 25-Jul-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) RC4558DGKR MSOP DGK 8 2500 358.0 335.0 35.0 RC4558DR SOIC D 8 2500 346.0 346.0 29.0 RC4558DR SOIC D 8 2500 340.5 338.1 20.6 RC4558IDGKR MSOP DGK 8 2500 358.0 335.0 35.0 RC4558IDR SOIC D 8 2500 340.5 338.1 20.6 RC4558IPWR TSSOP PW 8 2000 346.0 346.0 29.0 RC4558PSR SO PS 8 2000 346.0 346.0 33.0 RC4558PWR TSSOP PW 8 2000 346.0 346.0 29.0 Pack Materials-Page 2 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and Telecom www.ti.com/communications DSP dsp.ti.com Computers and Peripherals www.ti.com/computers Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & Defense www.ti.com/space-avionics-defense RF/IF and ZigBee® Solutions www.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated