CRYSTAL CLOCK OSCILLATORS Data Sheet 0631C Rev. - CMOS HF CLOCK (XO) S9-X13AXXX Series Description The S9-X13AXXX Series of quartz crystal oscillators provide high frequency with CMOS/LVCMOS output. The output can be tri-stated for test automation or combining multiple clocks. The device is based on low noise analog harmonic multiplication, and packaged in a miniature, low profile leadless FR4 based package with gold plated pads, which enhances compatibility with PCB material. Applications and Features • High Frequency - 125MHz to 220MHz • Fiber Channel: 10 GbE; Infiniband; Network Processors; SOHO Routing • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Low Phase Noise, Low Jitter • Tight frequency stability - ±20 ppm overall available • RoHS compliant, Lead Free Construction • Low cost Creating a Part Number S9 - X 13A X X X - FREQ Package Code S9 4 pad 7.5" x 5.2" SMD Operating Voltage A 3.3V±5% B 2.5V±5% Enable Option T Tri-state N N/C Overall Frequency Stability, ppm E ±20 F ±25 G ±50 H ±100 9 Customer specific Temperature Range, °C A 0 to 50 B 0 to 70 C -20 to 70 D -40 to 85 9 Customer specific 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com CRYSTAL CLOCK OSCILLATORS Data Sheet 0631C Rev. - S9-X13AXXX Series Continued CMOS HF CLOCK (XO) Absolute Maximum Ratings Parameter Symbol Value Unit Operating Temperature Range To -40 to +85 °C Storage Temperature Range Tst -50 to +90 °C Supply Voltage Vcc -0.5 to 4.5 V Enable/Disable Voltage Ven/dis 0 to Vcc V Electrical Parameters Parameter Sym Nominal Frequency Fo Supply Voltage Vcc Supply Current Conditions MIN MAX Unit 220 MHz Code A 3.135 125 3.3 3.465 V Code B 2.375 2.5 2.625 6 80 mA 90 100 110 Ohm 247 330 454 mV 50 mV Icc Load TYP At receiving end between the output Output Levels Vod Differential amplitude Amplitude error Vof Offset Voltage 1.125 1.25 1.375 V 50 mV 50/50 55/45 % 0.4 ns Offset voltage error Duty Cycle (Symmetry) At outputs crossing, room 45/55 temperature Rise/Fall Time Tr/Tf 20 to 80, 80 to 20% 0.35 Jitter, Integrated J Integrated from Phase 0.2 ps ps Noise, 12KHz to 20MHz, RMS Jitter, Wavecrest Random , period 2.5 characterized Accuml, pk to pk 25 Deterministic 3 Sub-harmonics Phase Noise Frequency Stability £(ªf) ªF/F <400 M -50 >400 M -45 @10 Hz -65 @100 Hz -95 @1 KHz -125 @10KHz -140 @100KHz -145 @>1mHz -148 ps 6 ps dBc dBc/Hz Overall, including inital See “Creating a Part Number”, calibratgion, temperature, Not all combinations available, aging 10 years, shock and consult factory ppm vibration Enable High Option Pin 1 Disabled CMOS Logic “0" 0 0.3Vcc Pin 1 Enabled CMOS Logic “1" 0.7Vcc Vcc V 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com CRYSTAL CLOCK OSCILLATORS Rev. S9-X13AXXX Series Continued CMOS HF CLOCK (XO) 7.5 Electrical Connection Pin Connection 1 Tri-state or No Connect 2 Gnd 3 OUT 4 Vcc NEL 2.0 0.5 Dimension are typical in mm 1 2 5.20 1.37 1.37 3 4 5.08 Environmental and Mechanical Characteristics Operating temp. range Mechanical Shock Thermal Shock Vibration Hermetic Seal See part Number Table Per MIL-STD-202, Method 213, Cond. E Per MIL-STD-883, Method 1011, Cond. A Per MIL-STD-883, Method 2007, Cond. A Leak rate less than 1x10-8 atm.cc/s of helium Soldering conditions See MAX reflow profile below (crystal only) Maximum Reflow Profile 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com