ALUMINUM ELECTROLYTIC CAPACITORS KZ Premium Grade Type, For Audio Equipment series Premium grade “nichicon MUSE” acoustic series. Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required. Adapted to the RoHS directive (2002/95/EC). KZ High Grade FG Specifications Performance Characteristics Item Category Temperature Range – 40 ~ +85°C Rated Voltage Range 25 ~ 100V Rated Capacitance Range 10 ~ 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is 0.01CV or less. Measurement frequency : 120Hz, Temperature : 20°C tan δ 25 0.12 Rated voltage (V) tan δ (MAX.) 50 0.08 100 0.07 Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z– 25°C / Z+20°C ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature 25 2 4 After 1000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Endurance Marking Capacitance change tan δ Leakage Current Within ±20% of initial value 150% or less of initial specified value Initial specified value or less Type numbering system (Example : 25V 100µF) Radial Lead Type Sleeve (P.E.T.) 0.8 tinned copper wire 1 2 3 4 5 6 7 8 9 10 11 UK Z 1 E 1 0 1 M PM f P ± 0.5 D+0.5MAX. f L+ MAX. 15MIN 4MIN (mm) α 100 2 3 After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with gold color letter on black sleeve. Shelf Life Pressure relief vent 50 2 3 (φD < 10) 1.0 (φD 10) 1.5 D 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5 f Capacitance tolerance (±20%) Rated Capacitance (100µF) Rated voltage (25V) Series name Type Configuration D Code 8 á 10 PM 12.5 ~ 18 HM f • Please refer to page 21 about the end seal configulation. Dimensions Cap.(µF) 10 22 33 47 1000 2200 3300 4700 100000 φ D × L (mm) V Code 100 220 330 470 101 221 331 471 102 25 1E 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 12.5 × 25 16 × 25 16 × 35.5 50 1H 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 16 × 35.5 18 × 40 100 2A 8 × 11.5 10 × 16 10 × 20 12.5 × 20 16 × 25 16 × 35.5 18 × 35.5 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V