ALUMINUM ELECTROLYTIC CAPACITORS SW 7mmL, For Audio Equipment series Acoustic series, with 7mm height. Adapted to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Performance Characteristics Item Category Temperature Range – 40 ~ +85˚C Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 0.1 ~ 220µF Capacitance Tolerance ±20% at 120Hz, 20˚C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Leakage Current Measurement frequency : 120Hz, Temperature : 20°C tan δ 6.3 0.24 Rated voltage (V) tan δ (MAX.) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz 6.3 4 8 Rated voltage (V) Impedance ratio Z– 25˚C / Z + 20˚C ZT / Z20 (MAX.) Z– 40˚C / Z + 20˚C Stability at Low Temperature After 1000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Endurance 10 3 6 16 2 4 Capacitance change tan δ Leakage current 25 2 4 35 2 3 50 2 3 Within ±20% of initial value 200% or less of initial specified value Initial specified value or less After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with black color letter on gold sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 Sleeve (P.E.T.) U SW 1 A 3 3 0 M DD d Configuration Capacitance tolerance (±20%) Rated Capacitance (33µF) Rated voltage (10V) Series name Type f P ± 0.5 D+0.5MAX. f L+1MAX. 15MIN 4MIN (mm) D 4 5 6.3 P 1.5 2.0 2.5 f d 0.45 0.45 0.45 f Configuration Pb-free leadwire fD Pb-free PET sleeve 4 ~ 6.3 DD Dimensions V Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 6.3 0J 4× 7 4× 7 4× 7 5× 7 6.3 × 7 10 1A 34 40 48 78 120 4× 7 4× 7 5× 7 6.3 × 7 16 1C 35 43 59 87 4× 4× 5× 5× 6.3 × 7 7 7 7 7 25 1E 28 39 55 65 98 4× 7 5× 7 5× 7 6.3 × 7 35 1V 28 48 58 71 4× 4× 5× 6.3 × 7 7 7 7 24 31 52 65 50 1H 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 5× 7 6.3 × 7 Case size φ D × L (mm) 1.0 2.3 3.5 5.0 10 19 24 29 38 58 Rated ripple Rated Ripple (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz~ Coefficient 0.70 1.00 1.17 1.36 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V