PCB Relay
G5SB
Compact Single-pole Relay for Switching
Up to 5 A (Normally Open Contact), Ideal
for Fan Control of Air Conditioners, and
Heating Control of Small Appliances.
• Environment-friendly, Pb-free/Cd-free.
• Compact SPDT Relay with high insulation between coil and
contacts.
• Up to 5 A switching on the N.O. contacts.
• Ensures an impulse withstand voltage of 8,000 V between
the coil and contacts.
• Conforms to UL and CSA (VDE approval pending).
Ordering Information
Classification
Standard
Contact form
SPDT
Protective structure
Fully sealed
Model
G5SB-14
Note: When ordering, add the rated coil voltage to the model number.
Example: G5SB-14 DC12
Rated coil voltage
■ Model Number Legend
G5SB-@@-DC@
1 2
3
1. Number of Poles
1: SPDT
2. Protective Structure
4: Fully sealed
3. Rated Coil Voltage
5, 9, 12, 24 VDC
PCB Relay G5SB
1
Specifications
■ Coil Ratings
Rated voltage
5 VDC
9 VDC
12 VDC
Rated current
80 mA
44.4 mA
33.3 mA
24 VDC
16.7 mA
Coil resistance
63 Ω
202 Ω
360 Ω
1,440 Ω
Must operate voltage
75% max. of rated voltage
Must release voltage
5% min. of rated voltage
Maximum voltage
110% of rated voltage
Power consumption
Approx. 400 mW
■ Contact Ratings
Load
Resistive load
Rated load
3 A (NO)/3 A (NC) at 125 VAC
5 A (NO)/3 A (NC) at 125 VAC
5 A (NO) at 250 VAC
3 A (NC) at 250 VAC
5 A (NO)/3 A (NC) at 30 VDC
Contact material
Ag alloy
Rated carry current
5 A (NO)/3 A (NC)
Max. switching voltage
250 VAC, 30 VDC
Max. switching current
5 A (NO)/3 A (NC)
Max. switching capacity
1,250 VA, 150 W (NO)
750 VA, 30 W (NC)
Min. permissible load
10 mA at 5 VDC
Note: P level: λ60=0.1 x 10 operation (with an operating frequency of 120 operations/min.)
–6
■ Characteristics
Contact resistance (See note 2.)
100 mΩ max. initial
Operate time (See note 3.)
10 ms max.
Release time (See note 3.)
5 ms max.
Insulation resistance (See note 4.)
1,000 MΩ min.
Dielectric strength
4,000 VAC, 50/60 Hz for 1 min between coil and contacts
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
Impulse withstand voltage
8 kV (1.2 x 50 µs)
Vibration resistance
Destruction: 10 to 55 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Malfunction: 10 to 55 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance
Destruction:
1,000 m/s2 (approx. 100G)
Malfunction:
Energized: 100 m/s2 (approximately 10G)
Non-energized: 100 m/s2 (approximately 10G)
Life expectancy (See note 5.)
Mechanical: 5,000,000 operations (18,000 operations per hour)
Electrical: 200,000 operations: 3 A (NO)/3 A (NC) at 125 VAC resistive load
50,000 operations:
5 A (NO)/3 A (NC) at 125 VAC resistive load
50,000 operations:
5 A (NO) at 250 VAC resistive load
10,000 operations:
3 A (NC) at 250 VAC resistive load
10,000 operations:
5 A (NO)/3 A (NC) at 30 VDC resistive load
Switching frequency: 1,800 operations per hour
Ambient temperature
Operating: –40°C to 70°C with no icing or condensation
Ambient humidity
Operating:
Weight
Approx. 6.5 g
Note: 1.
2.
3.
4.
5.
2
5% to 95%
The data shown above are initial values.
The contact resistance is possible with 1 A applied at 5 VDC using a fall-of-potential method.
The operating time is possible with the operating voltage imposed with no contact bounce at an ambient temperature of 23°C.
The insulation resistance is possible between coil and contacts and between contacts of the same polarity at 500 VDC.
The electrical life data items shown are possible at 23°C.
PCB Relay G5SB
■ Approved Standards
UL508 (File No. E41515)
CSA C22.2 (No. 14) (File No. LR31928)
Model
Coil ratings
G5SB
Contact ratings
5 to 24 VDC
Number of test operations
6,000
3 A, 125 VAC (resistive) NC only
2 A, 125 VAC (resistive) NC only
5 A, 250 VAC (resistive) NO only
3 A, 250 VAC (resistive) NO only
5 A, 30 VDC (resistive) NO only
Note: Electrical durability tests are performed at 70°C.
Engineering Data
Ambient Temperature vs. Maximum Voltage
Maximum voltage (%)
Switching current (A)
Max. Switching Capacity
7
6
AC resistive (NO)
5
4
AC resistive (NC)
DC resistive (NO)
3
200
180
160
140
120
110
100
80
2
60
DC resistive (NC)
40
1
20
0
1
10
30
100
250
1,000
0
−40
−20
0
23
40
60 70
80
100
Ambient temperature (°C)
Switching voltage (V)
Dimensions
Unit: mm
PCB Mounting Holes
(Bottom View)
Tolerance: ±0.1 mm
10.3 max.
(10.0) (See note.)
20.3 max.
(20.0) (See note.)
2.54
Five, 1.3±0.1-dia. holes
(1.19)
2.54
15.8 max.
(15.5) (See note.)
Terminal Arrangement/
Internal Connections
(Bottom View)
1
2
3
7.62
0.4
5
3.4
0.4
10.16
1
0.27
5.08
2.54
7.62
4
(No coil polarity)
(1.18)
10.16
5.08
2.54
Note: Values in parentheses are average values.
PCB Relay G5SB
3
Certain Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all catalogs, manuals or other documents, whether electronic or in writing, relating to the sale of goods or services (collectively, the "Goods") by
Omron Electronics LLC and its subsidiary companies ("Seller"). Seller hereby
objects to any terms or conditions proposed in Buyer's purchase order or other
documents which are inconsistent with, or in addition to, these Terms. Please
contact your Omron representative to confirm any additional terms for sales
from your Omron company.
2. Prices. All prices stated are current, subject to change without notice by
Seller. Buyer agrees to pay the price in effect at time of shipment.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Orders. Seller will accept no order less than $200 net billing.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the importation or sale of the Goods.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Goods sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Goods sold
hereunder and stop any Goods in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it
by Buyer. Buyer shall in any event remain liable for all unpaid accounts.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
a. Shipments shall be by a carrier selected by Seller;
b. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
c. All sales and shipments of Goods shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of
the Goods shall pass from Seller to Buyer, provided that Seller shall retain a
security interest in the Goods until the full purchase price is paid by Buyer;
d. Delivery and shipping dates are estimates only.
e. Seller will package Goods as it deems proper for protection against normal
handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Goods occurring before delivery to the carrier must be presented in writing to
Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Goods from
Seller in the condition claimed.
12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the
Goods will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Seller (or such other period expressed
in writing by Seller). Seller disclaims all other warranties, express or implied.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Seller further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Goods or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer
responsible for labor charges for removal or replacement thereof) the noncomplying Good or, at Seller's election, to repay or credit Buyer an amount
equal to the purchase price of the Good; provided that in no event shall Seller
be responsible for warranty, repair, indemnity or any other claims or expenses
regarding the Goods unless Seller's analysis confirms that the Goods were
properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any goods by
Buyer must be approved in writing by Seller before shipment. Seller shall not
be liable for the suitability or unsuitability or the results from the use of Goods
in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any
advice, recommendations or information given orally or in writing, are not to be
construed as an amendment or addition to the above warranty.
13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE
GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY,
NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of
Seller exceed the individual price of the Good on which liability is asserted.
14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and
its employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Goods. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Seller and defend or settle
any action brought against Seller to the extent that it is based on a claim that
any Good made to Buyer specifications infringed intellectual property rights of
another party.
15. Property; Confidentiality. The intellectual property embodied in the Goods is
the exclusive property of Seller and its affiliates and Buyer shall not attempt to
duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling
shall remain the exclusive property of Seller. All information and materials
supplied by Seller to Buyer relating to the Goods are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and
strictly prevent disclosure to any third party.
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right
and no course of dealing between Buyer and Seller shall operate as a waiver
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder
without Seller's written consent. (c) Amendment. These Terms constitute the
entire agreement between Buyer and Seller relating to the Goods, and no provision may be changed or waived unless in writing signed by the parties.
(d) Severability. If any provision hereof is rendered ineffective or invalid, such
provision shall not invalidate any other provision. (e) Setoff. Buyer shall have
no right to set off any amounts against the amount owing in respect of this
invoice. (f) As used herein, "including" means "including without limitation".
Certain Precautions on Specifications and Use
1. Suitability of Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Good in the
Buyer's application or use of the Good. At Buyer's request, Seller will provide
applicable third party certification documents identifying ratings and limitations
of use which apply to the Good. This information by itself is not sufficient for a
complete determination of the suitability of the Good in combination with the
end product, machine, system, or other application or use. The following are
some examples of applications for which particular attention must be given.
This is not intended to be an exhaustive list of all possible uses of this Good,
nor is it intended to imply that the uses listed may be suitable for this Good:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to
this Good.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR
THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4
PCB Relay G5SB
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable Good, or any consequence thereof.
3. Performance Data. Performance data given in this catalog is provided as a
guide for the user in determining suitability and does not constitute a warranty.
It may represent the result of Seller's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Good may be changed without any notice. When in doubt, special
part numbers may be assigned to fix or establish key specifications for your
application. Please consult with your Seller's representative at any time to confirm actual specifications of purchased Good.
5. Errors and Omissions. The information in this catalog has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONICS LLC
OMRON CANADA, INC.
OMRON ON-LINE
55 East Commerce Drive, Suite B
Schaumburg, IL 60173-5302
885 Milner Avenue
Toronto, Ontario M1B 5V8
847-882-2288
416-286-6465
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.ca
Cat. No. K122-E3-01
12/03
Specifications subject to change without notice
Printed in USA
PCB Relay G5SB
5