TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 D Optimized for Off-Line and dc-to-dc D D D D D D D D D D D Converters Low Start-Up Current (<1 mA) Automatic Feed-Forward Compensation Pulse-by-Pulse Current Limiting Enhanced Load-Response Characteristics Undervoltage Lockout With Hysteresis Double-Pulse Suppression High-Current Totem-Pole Output Internally Trimmed Bandgap Reference 500-kHz Operation Error Amplifier With Low Output Resistance Designed to Be Interchangeable With UC2842 and UC3842 Series description/ordering information D PACKAGE (TOP VIEW) COMP NC VFB NC ISENSE NC RT/CT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 REF NC VCC VC OUTPUT GND POWER GROUND NC − No internal connection D-8 OR P PACKAGE (TOP VIEW) COMP VFB ISENSE RT/CT 1 8 2 7 3 6 4 5 REF VCC OUTPUT GND The TL284x and TL384x series of control integrated circuits provide the features that are necessary to implement off-line or dc-to-dc fixed-frequency current-mode control schemes, with a minimum number of external components. Some of the internally implemented circuits are an undervoltage lockout (UVLO), featuring a start-up current of less than 1 mA, and a precision reference trimmed for accuracy at the error amplifier input. Other internal circuits include logic to ensure latched operation, a pulse-width modulation (PWM) comparator (that also provides current-limit control), and a totem-pole output stage designed to source or sink high-peak current. The output stage, suitable for driving N-channel MOSFETs, is low when it is in the off state. Major differences between members of these series are the UVLO thresholds and maximum duty-cycle ranges. Typical UVLO thresholds of 16 V (on) and 10 V (off) on the TLx842 and TLx844 devices make them ideally suited to off-line applications. The corresponding typical thresholds for the TLx843 and TLx845 devices are 8.4 V (on) and 7.6 V (off). The TLx842 and TLx843 devices can operate to duty cycles approaching 100%. A duty-cycle range of 0 to 50% is obtained by the TLx844 and TLx845 by the addition of an internal toggle flip-flop, which blanks the output off every other clock cycle. The TL284x-series devices are characterized for operation from −40°C to 85°C. The TL384x devices are characterized for operation from 0°C to 70°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2008, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 ORDERING INFORMATION† ORDERABLE PART NUMBER PACKAGE‡ TA PDIP (P) (8 pin) SOIC (D) (8 pin) 0°C to 70°C SOIC (D) (14 pin) PDIP (P) (8 pin) SOIC (D) (8 pin) −40°C 40°C to 85°C SOIC (D) (14 pin) Tube of 50 TL3842P TL3842P TL3843P TL3843P TL3844P TL3844P TL3845P TL3845P Tube of 75 TL3842D-8 Reel of 2500 TL3842DR-8 Tube of 75 TL3843D-8 Reel of 2500 TL3843DR-8 Tube of 75 TL3844D-8 Reel of 2500 TL3844DR-8 Tube of 75 TL3845D-8 Reel of 2500 TL3845DR-8 Tube of 50 TL3842D Reel of 2500 TL3842DR Tube of 50 TL3843D Reel of 2500 TL3843DR Tube of 50 TL3844D Reel of 2500 TL3844DR Tube of 50 TL3845D Reel of 2500 TL3845DR Tube of 50 TOP-SIDE MARKING TL3842 TL3843 TL3844 TL3845 TL3842 TL3843 TL3844 TL3845 TL2842P TL2842P TL2843P TL2843P TL2844P TL2844P TL2845P TL2845P Tube of 75 TL2842D-8 Reel of 2500 TL2842DR-8 Tube of 75 TL2843D-8 Reel of 2500 TL2843DR-8 Tube of 75 TL2844D-8 Reel of 2500 TL2844DR-8 Tube of 75 TL2845D-8 Reel of 2500 TL2845DR-8 Tube of 50 TL2842D Reel of 2500 TL2842DR Tube of 50 TL2843D Reel of 2500 TL2843DR Tube of 50 TL2844D Reel of 2500 TL2844DR Tube of 50 TL2845D Reel of 2500 TL2845DR † TL2842 TL2843 TL2844 TL2845 TL2842 TL2843 TL2844 TL2845 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at http://www.ti.com. ‡ Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 functional block diagram VCC 12 34 V NOM GND UVLO 9 − 5-V REF EN + 14 REF Internal Bias Vref Good Logic RT/CT 7 11 10 OSC VC OUTPUT † T Error Amplifier VFB COMP ISENSE 3 1 5 + − 8 POWER GROUND S 2R R R 1V PWM Latch CurrentSense Comparator † The toggle flip-flop is present only in TL2844, TL2845, TL3844, and TL3845. Pin numbers shown are for the D (14-pin) package. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage (see Note 1) (ICC < 30 mA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Self limiting Analog input voltage range, VI (VFB and ISENSE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 6.3 V Output voltage, VO (OUTPUT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Input voltage, VI, (VC, D package only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Supply current, ICC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±1 A Error amplifier output sink current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Package thermal impedance, θJA (see Notes 2 and 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W D-8 package . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85°C/W Virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Output energy (capacitive load) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 µJ Lead temperature, 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltages are with respect to the device GND terminal. 2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can impact reliability. 3. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions MIN VCC and ‡ 4 VC‡ NOM MAX UNIT 30 V VI, RT/CT Input voltage 0 5.5 V VI, VFB and ISENSE Input voltage 0 5.5 V VO, OUTPUT Output voltage 0 30 V VO, POWER GROUND‡ Output voltage −0.1 1 V ICC Supply current, externally limited 25 mA IO Average output current 200 mA IO(ref) Reference output current fosc Oscillator frequency TA O Operating ti free-air f i temperature t t Supply voltage 100 These recommended voltages for VC and POWER GROUND apply only to the D package. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 −20 mA 500 kHz TL284x −40 85 TL384x 0 70 °C TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 electrical characteristics over recommended operating free-air temperature range, VCC = 15 V (see Note 4), RT = 10 kΩ, CT = 3.3 nF (unless otherwise specified) reference section TL284x PARAMETER TEST CONDITIONS TA = 25°C TL384x MIN TYP† MAX MIN TYP† MAX 4.95 4.9 UNIT Output voltage IO = 1 mA, 5 5.05 5 5.1 V Line regulation VCC = 12 V to 25 V 6 20 6 20 mV Load regulation IO = 1 mA to 20 mA 6 25 6 25 mV 0.2 0.4 0.2 0.4 mV/°C 5.18 V Temperature coefficient of output voltage Output voltage with worst-case variation VCC = 12 V to 25 V, IO = 1 mA to 20 mA Output noise voltage f = 10 Hz to 10 kHz, TA = 25°C Output-voltage long-term drift After 1000 h at TA = 25°C 4.9 5.1 4.82 50 Short-circuit output current −30 µV 50 5 25 −100 −180 −30 5 25 mV −100 −180 mA † All typical values are at TA = 25°C. NOTE 4: Adjust VCC above the start threshold before setting it to 15 V. oscillator section TL284x PARAMETER TEST CONDITIONS Oscillator frequency (see Note 5) TA = 25°C Frequency change with supply voltage VCC = 12 V to 25 V TL384x UNIT MIN TYP† MAX MIN TYP† MAX 47 52 57 47 52 57 kHz 2 10 2 10 Hz/kHz Frequency change with temperature 50 50 Hz/kHz Peak-to-peak amplitude at RT/CT 1.7 1.7 V † All typical values are at TA = 25°C. NOTES: 4. Adjust VCC above the start threshold before setting it to 15 V. 5. Output frequency equals oscillator frequency for the TLx842 and TLx843. Output frequency is one-half the oscillator frequency for the TLx844 and TLx845. error-amplifier section TL284x PARAMETER Feedback input voltage TEST CONDITIONS UNIT MIN MAX MIN TYP† MAX COMP at 2.5 V 2.45 2.50 2.55 2.42 2.50 2.58 V −0.3 −1 −0.3 −2 µA VO = 2 V to 4 V 65 90 65 90 dB 0.7 1 0.7 1 MHz 60 70 60 70 dB 2 6 2 6 mA −0.5 −0.8 −0.5 −0.8 mA Input bias current Open-loop voltage amplification TL384x TYP† Gain-bandwidth product Supply-voltage rejection ratio VCC = 12 V to 25 V Output sink current VFB at 2.7 V, COMP at 1.1 V Output source current VFB at 2.3 V, COMP at 5 V High-level output voltage VFB at 2.3 V, RL = 15 kΩ to GND Low-level output voltage VFB at 2.7 V, RL = 15 kΩ to GND 5 6 0.7 5 1.1 6 0.7 V 1.1 V † All typical values are at TA = 25°C. NOTE 4: Adjust VCC above the start threshold before setting it to 15 V. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 electrical characteristics over recommended operating free-air temperature range, VCC = 15 V (see Note 4), RT = 10 kΩ, CT = 3.3 nF (unless otherwise specified) (continued) current-sense section TL284x PARAMETER TEST CONDITIONS Voltage amplification See Notes 6 and 7 Current-sense comparator threshold COMP at 5 V, See Note 6 Supply-voltage rejection ratio VCC = 12 V to 25 V, See Note 6 TL384x UNIT MIN TYP† MAX MIN TYP† MAX 2.85 3 3.13 2.85 3 3.15 V/V 0.9 1 1.1 0.9 1 1.1 V 70 Input bias current Delay time to output 70 dB −2 −10 −2 −10 µA 150 300 150 300 ns † All typical values are at TA = 25°C. NOTES: 4. Adjust VCC above the start threshold before setting it to 15 V. 6. These parameters are measured at the trip point of the latch, with VFB at 0 V. 7. Voltage amplification is measured between ISENSE and COMP, with the input changing from 0 V to 0.8 V. output section TL284x PARAMETER TEST CONDITIONS High level output voltage High-level Low level output voltage Low-level MIN TYP† IOH = −20 mA 13 IOH = −200 mA 12 TL384x MIN TYP† 13.5 13 13.5 13.5 12 13.5 MAX MAX UNIT V IOL = 20 mA 0.1 0.4 0.1 0.4 IOL = 200 mA 1.5 2.2 1.5 2.2 V Rise time CL = 1 nF, TA = 25°C 50 150 50 150 ns Fall time CL = 1 nF, TA = 25°C 50 150 50 150 ns † All typical values are at TA = 25°C. NOTE 4: Adjust VCC above the start threshold before setting it to 15 V. undervoltage-lockout section TL284x PARAMETER Start threshold voltage Minimum operating voltage after startup MIN TL384x TYP† MAX MIN TYP† MAX TLx842, TLx844 15 16 17 14.5 16 17.5 TLx843, TLx845 7.8 8.4 9 7.8 8.4 9 TLx842, TLx844 9 10 11 8.5 10 11.5 TLx843, TLx845 7 7.6 8.2 7 7.6 8.2 UNIT V V † All typical values are at TA = 25°C. NOTE 4: Adjust VCC above the start threshold before setting it to 15 V. pulse-width-modulator section TL284x PARAMETER Maximum duty cycle TYP† MAX MIN TYP† MAX TLx842, TLx843 95 97 100 95 97 100 TLx844, TLx845 46 48 50 46 48 50 Minimum duty cycle 0 † All typical values are at T = 25°C. A NOTE 4: Adjust VCC above the start threshold before setting it to 15 V. 6 TL384x MIN POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 0 UNIT % TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 electrical characteristics over recommended operating free-air temperature range, VCC = 15 V (see Note 4), RT = 10 kΩ, CT = 3.3 nF (unless otherwise specified) (continued) supply voltage TL284x PARAMETER TEST CONDITIONS MIN TYP† Start-up current TL384x MAX MIN TYP† MAX UNIT 0.5 1 0.5 1 mA Operating supply current VFB and ISENSE at 0 V 11 17 11 17 mA Limiting voltage ICC = 25 mA 34 34 V † All typical values are at TA = 25°C. NOTE 4: Adjust VCC above the start threshold before setting it to 15 V. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 APPLICATION INFORMATION 2.5 V 0.5 mA Error Amplifier COMP Zf NOTE A: + − VFB Zi Error amplifier can source or sink up to 0.5 mA. Figure 1. Error-Amplifier Configuration Error Amplifier IS (see Note A) 2R + − R COMP Rf RS 1V Current-Sense Comparator ISENSE Cf GND NOTE A: Peak current (IS) is determined by the formula: I S(max) + 1 V RS A small RC filter formed by resistor Rf and capacitor Cf may be required to suppress switch transients. Figure 2. Current-Sense Circuit REF RT (see Note A) RT/CT CT GND NOTE A: For RT > 5 kΩ: f [ 1.72 R TC T Figure 3. Oscillator Section 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 APPLICATION INFORMATION TIMING RESISTANCE vs FREQUENCY DEAD TIME vs TIMING CAPACITANCE 100 100 CT = 10 nF VCC = 15 V RT ≥ 5 kΩ TA = 25°C 40 CT = 4.7 nF CT = 2.2 nF R T− Timing Resistance − kΩ Dead Time − µ s 40 10 4 1 CT = 1 nF CT = 22 nF 10 CT = 47 nF CT = 100 nF 4 0.4 VCC = 15 V TA = 25°C 1 100 0.1 0 4 10 40 100 1k 10 k 100 k 1M f − Frequency − Hz CT − Timing Capacitance − nF Figure 4 Figure 5 open-loop laboratory test fixture In the open-loop laboratory test fixture (see Figure 6), high peak currents associated with loads necessitate careful grounding techniques. Timing and bypass capacitors should be connected close to the GND terminal in a single-point ground. The transistor and 5-kΩ potentiometer sample the oscillator waveform and apply an adjustable ramp to the ISENSE terminal. REF RT A 4.7 kΩ VCC 2N2222 100 kΩ 1 kΩ Error Amplifier Adjust DUT VFB 5 kΩ REF COMP ISENSE 0.1 µF TL284x TL384x VCC OUTPUT 0.1 µF 1 kΩ, 1 W OUTPUT 4.7 kΩ ISENSE Adjust RT/CT GND GND CT Figure 6. Open-Loop Laboratory Test Fixture POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 TL284x, TL384x CURRENT-MODE PWM CONTROLLERS SLVS038G − JANUARY 1989 − REVISED FEBRUARY 2008 APPLICATION INFORMATION shutdown technique The PWM controller (see Figure 7) can be shut down by two methods: either raise the voltage at ISENSE above 1 V or pull the COMP terminal below a voltage two diode drops above ground. Either method causes the output of the PWM comparator to be high (refer to block diagram). The PWM latch is reset dominant so that the output remains low until the next clock cycle after the shutdown condition at the COMP or ISENSE terminal is removed. In one example, an externally latched shutdown can be accomplished by adding an SCR that resets by cycling VCC below the lower UVLO threshold. At this point, the reference turns off, allowing the SCR to reset. 1 kΩ REF COMP Shutdown ISENSE 330 Ω 500 Ω Shutdown To Current-Sense Resistor Figure 7. Shutdown Techniques A fraction of the oscillator ramp can be summed resistively with the current-sense signal to provide slope compensation for converters requiring duty cycles over 50% (see Figure 8). Note that capacitor C forms a filter with R2 to suppress the leading-edge switch spikes. REF 0.1 µF RT RT/CT CT R1 ISENSE R2 ISENSE C Figure 8. Slope Compensation 10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 RSENSE PACKAGE OPTION ADDENDUM www.ti.com 1-May-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL2842D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842D-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DE4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DG4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DR-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DRE4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842DRG4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL2842P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL2842PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL2843D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843D-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DE4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DG4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DR-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DRE4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2843DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 1-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL2843DRG4-8 ACTIVE SOIC D 8 TL2843P ACTIVE PDIP P 8 50 TL2843PE4 ACTIVE PDIP P 8 TL2844D ACTIVE SOIC D TL2844D-8 ACTIVE SOIC TL2844DE4 ACTIVE TL2844DE4-8 2500 Green (RoHS & no Sb/Br) Lead/Ball Finish MSL Peak Temp (3) CU NIPDAU Level-1-260C-UNLIM Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844DG4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844DR-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844DRE4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844DRG4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2844P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL2844PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL2845D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845D-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DE4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DG4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DR-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 1-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL2845DRE4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845DRG4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL2845P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL2845PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL3842D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842D-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DE4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DG4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DR-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DRE4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842DRG4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR TL3842P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL3842PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL3843D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843D-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843D-8E4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843DG4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 3 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 1-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL3843DR-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843DR-8E4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843DRG4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3843P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL3843PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL3844D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844D-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DE4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DG4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DR-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DRE4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844DRG4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3844P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL3844PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL3845D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3845D-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3845DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3845DE4-8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3845DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 4 Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 1-May-2010 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL3845DG4-8 ACTIVE SOIC D 8 TL3845DR ACTIVE SOIC D TL3845DR-8 ACTIVE SOIC TL3845DRE4 ACTIVE TL3845DRE4-8 75 Lead/Ball Finish MSL Peak Temp (3) Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3845DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3845DRG4-8 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3845P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL3845PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 30-Apr-2010 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing TL2842DR SOIC D TL2842DR-8 SOIC TL2843DR SOIC TL2843DR-8 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL2844DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TL2844DR-8 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL2845DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TL2845DR-8 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL3842DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TL3842DR-8 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL3843DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TL3843DR-8 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL3844DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TL3844DR-8 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL3845DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TL3845DR-8 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 30-Apr-2010 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TL2842DR SOIC D 14 2500 346.0 346.0 33.0 TL2842DR-8 SOIC D 8 2500 340.5 338.1 20.6 TL2843DR SOIC D 14 2500 346.0 346.0 33.0 TL2843DR-8 SOIC D 8 2500 340.5 338.1 20.6 TL2844DR SOIC D 14 2500 346.0 346.0 33.0 TL2844DR-8 SOIC D 8 2500 340.5 338.1 20.6 TL2845DR SOIC D 14 2500 346.0 346.0 33.0 TL2845DR-8 SOIC D 8 2500 340.5 338.1 20.6 TL3842DR SOIC D 14 2500 346.0 346.0 33.0 TL3842DR-8 SOIC D 8 2500 340.5 338.1 20.6 TL3843DR SOIC D 14 2500 346.0 346.0 33.0 TL3843DR-8 SOIC D 8 2500 340.5 338.1 20.6 TL3844DR SOIC D 14 2500 346.0 346.0 33.0 TL3844DR-8 SOIC D 8 2500 340.5 338.1 20.6 TL3845DR SOIC D 14 2500 346.0 346.0 33.0 TL3845DR-8 SOIC D 8 2500 340.5 338.1 20.6 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and Telecom www.ti.com/communications DSP dsp.ti.com Computers and Peripherals www.ti.com/computers Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & Defense www.ti.com/space-avionics-defense RF/IF and ZigBee® Solutions www.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated