TI TLV431CDBZR

 SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
D Low-Voltage Operation . . . VREF = 1.24 V
D Adjustable Output Voltage, VO = VREF to 6 V
D Reference Voltage Tolerances at 255C
D
D Low Operational Cathode Current . . .
D
D
− 0.5% for TLV431B
− 1% for TLV431A
− 1.5% for TLV431
Typical Temperature Drift
− 4 mV (05C to 705C)
− 6 mV (–405C to 855C)
− 11 mV (–405C to 1255C)
D
DBV (SOT-23-5) PACKAGE
(TOP VIEW)
D (SOIC) PACKAGE
(TOP VIEW)
CATHODE
ANODE
ANODE
NC
1
8
2
7
3
6
4
5
REF
ANODE
ANODE
NC
NC
*
CATHODE
1
5
ANODE
4
REF
DBZ (SOT-23-3) PACKAGE
(TOP VIEW)
REF
1
CATHODE
2
3
2
3
ANODE
NC − No internal connection
* For TLV431, TLV431A: NC − No internal connection
* For TLV431B: Leave open or connect to ANODE
PK (SOT-89) PACKAGE
(TOP VIEW)
3
ANODE
80 µA Typ
0.25-Ω Typical Output Impedance
Ultra-Small SC-70 Package Offers 40%
Smaller Footprint Than SOT-23-3
See TLVH431 and TLVH432 for
− Wider VKA (1.24 V to 18 V) and IK (80 mA)
− Additional SOT-89 Package
− Multiple Pinouts for SOT-23-3 and SOT-89
Packages
2
1
CATHODE
ANODE
REF
DCK (SC-70) PACKAGE
(TOP VIEW)
CATHODE
NC
REF
1
6
2
5
3
4
ANODE
NC
NC
LP (TO-92/TO-226)
r PACKAGE
(TOP VIEW)
CATHODE
ANODE
REF
NC - No internal connection
description/ordering information
The TLV431 is a low-voltage 3-terminal adjustable voltage reference with specified thermal stability over
applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF
(1.24 V) and 6 V with two external resistors (see Figure 2). These devices operate from a lower voltage
(1.24 V) than the widely used TL431 and TL1431 shunt-regulator references.
When used with an optocoupler, the TLV431 is an ideal voltage reference in isolated feedback circuits for 3-V
to 3.3-V switching-mode power supplies. These devices have a typical output impedance of 0.25 Ω. Active
output circuitry provides a very sharp turn-on characteristic, making them excellent replacements for
low-voltage Zener diodes in many applications, including on-board regulation and adjustable power supplies.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2005, Texas Instruments Incorporated
! " #$%! " &$'(#! )!%*
)$#!" # ! "&%##!" &% !+% !%" %," "!$%!"
"!)) -!.* )$#! &#%""/ )%" ! %#%""(. #($)%
!%"!/ (( &%!%"*
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
ORDERING INFORMATION
TJ
255C VREF
TOLERANCE
PACKAGE†
SC-70 (DCK)
SOT-23-5 (DBV)
0.5%
SOT-23-3 (DBZ)
SOT-89 (PK)
TO-92 (LP)
0°C
0
C to 70
70°C
C
SOT-23-5 (DBV)
1%
SOT-23-3 (DBZ)
TO-92 (LP)
SOT-23-5 (DBV)
1.5%
SOT-23-3 (DBZ)
TO-92 (LP)
ORDERABLE
PART NUMBER
Reel of 3000
TLV431BCDCKR
Reel of 250
TLV431BCDCKT
Reel of 3000
TLV431BCDBVR
Reel of 250
TLV431BCDBVT
Reel of 3000
TLV431BCDBZR
Reel of 250
TLV431BCDBZT
Reel of 1000
TLV431BCPK
Bulk of 1000
TLV431BCLP
Reel of 2000
TLV431BCLPR
Reel of 3000
TLV431ACDBVR
Reel of 250
TLV431ACDBVT
Reel of 3000
TLV431ACDBZR
Bulk of 1000
TLV431ACLP
Reel of 2000
TLV431ACLPR
Reel of 3000
TLV431CDBVR
Reel of 250
TLV431CDBVT
Reel of 3000
TLV431CDBZR
Bulk of 1000
TLV431CLP
Reel of 2000
TLV431CLPR
TOP-SIDE
MARKING
YE_
Y3GU
Y3GU
VE
TV431B
VAHC‡, YAC_§
YAC_§
V431AC
VAII‡, Y3I_§
Y3I_§
V431C
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
‡ Possible top-side marking on units prior to August 16, 2004
§ DBV/DBZ/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
ORDERING INFORMATION (continued)
TJ
255C VREF
TOLERANCE
TLV431BIDCKR
Reel of 250
TLV431BIDCKT
Reel of 3000
TLV431BIDBVR
Reel of 250
TLV431BIDBVT
Reel of 3000
TLV431BIDBZR
Reel of 250
TLV431BIDBZT
Bulk of 1000
TLV431BILP
Reel of 2000
TLV431BILPR
Tube of 75
TLV431AID
Reel of 2500
TLV431AIDR
Reel of 3000
TLV431AIDBVR
Reel of 250
TLV431AIDBVT
SOT-23-3 (DBZ)
Reel of 3000
TLV431AIDBZR
YAI_§
SOT-89 (PK)
Reel of 1000
TLV431BIPK
VF
Bulk of 1000
TLV431AILP
Ammo of 2000
TLV431AILPM
Reel of 2000
TLV431AILPR
Reel of 3000
TLV431IDBVR
Reel of 250
TLV431IDBVT
Reel of 3000
TLV431IDBZR
Bulk of 1000
TLV431ILP
Reel of 2000
TLV431ILPR
Reel of 3000
TLV431BQDCKR
Reel of 250
TLV431BQDCKT
Reel of 3000
TLV431BQDBVR
Reel of 250
TLV431BQDBVT
Reel of 3000
TLV431BQDBZR
Reel of 250
TLV431BQDBZT
Reel of 1000
TLV431BQPK
Bulk of 1000
TLV431BQLP
Reel of 2000
TLV431BQLPR
Reel of 1000
TLV431AQPK
SOT-23-5 (DBV)
0.5%
SOT-23-3 (DBZ)
TO-92 (LP)
SOIC (D)
SOT-23-5 (DBV)
1%
TO-92 (LP)
SOT-23-5 (DBV)
1.5%
SOT-23-3 (DBZ)
TO-92 (LP)
SC-70 (DCK)
SOT-23-5 (DBV)
0.5%
SOT-23-3 (DBZ)
−40°C
125°C
−40
C to 125
C
SOT-89 (PK)
TO-92 (LP)
1%
TOP-SIDE
MARKING‡
Reel of 3000
SC-70 (DCK)
−40°C
−40
C to 85
85°C
C
ORDERABLE
PART NUMBER
PACKAGE†
SOT-89 (PK)
YF_
Y3FU
Y3FU
TY431B
TY431A
VAHI‡, YAI_§
V431AI
VAII‡, Y3I_§
Y3I_§
V431I
YG_
Y3HU
Y3HU
V6
TQ431B
VA
1.5%
SOT-89 (PK)
Reel of 1000
TLV431QPK
VB
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
‡ DBV/DBZ/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
logic block diagram
CATHODE
REF
+
−
VREF = 1.24 V
ANODE
equivalent schematic
CATHODE
REF
ANODE
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Cathode voltage, VKA (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Continuous cathode current range, IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20 mA to 20 mA
Reference current range, Iref . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.05 mA to 3 mA
Package thermal impedance, θJA (see Notes 2 and 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W
DBV package . . . . . . . . . . . . . . . . . . . . . . . . 206°C/W
DBZ package . . . . . . . . . . . . . . . . . . . . . . . . . 206°C/W
DCK package . . . . . . . . . . . . . . . . . . . . . . . . 252°C/W
LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140°C/W
PK package . . . . . . . . . . . . . . . . . . . . . . . . . . . 52°C/W
Operating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values are with respect to the anode terminal, unless otherwise noted.
2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
MIN
MAX
UNIT
VKA
Cathode voltage
VREF
6
V
IK
Cathode current
0.1
15
mA
TA
Operating free-air temperature range
TLV431_C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
0
70
TLV431_I
−40
85
TLV431_Q
−40
125
°C
C
5
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
TLV431 electrical characteristics at 25°C free-air temperature (unless otherwise noted)
TLV431
PARAMETER
TEST CONDITIONS
TA = 25°C
VREF
VKA = VREF,
IK = 10 mA
Reference voltage
TA = full range
(see Note 4 and
Figure 1)
MIN
TYP
MAX
1.222
1.24
1.258
TLV431C
1.21
1.27
TLV431I
1.202
1.278
TLV431Q
1.194
TLV431C
UNIT
V
1.286
4
12
TLV431I
6
20
TLV431Q
11
31
Ratio of VREF change in cathode
VKA = VREF to 6 V, IK = 10 mA (see Figure 2)
voltage change
−1.5
−2.7
mV/V
Reference terminal current
IK = 10 mA, R1 = 10 kΩ, R2 = open (see Figure 2)
0.15
0.5
µA
TLV431C
0.05
0.3
Iref(dev)
Iref deviation over full
temperature range (see Note 4)
IK = 10 mA, R1 = 10 kΩ, R2 = open
(see Note 4 and Figure 2)
TLV431I
0.1
0.4
TLV431Q
0.15
0.5
IK(min)
Minimum cathode current for
regulation
IK(off)
Off-state cathode current
|zKA|
Dynamic impedance
(see Note 5)
VREF(dev)
∆VREF
∆VKA
Iref
VREF deviation over full
temperature range (see Note 4)
VKA = VREF, IK = 10 mA
(see Note 4 and Figure 1)
VKA = VREF (see Figure 1)
VREF = 0, VKA = 6 V (see Figure 3)
VKA = VREF, f ≤ 1 kHz,
IK = 0.1 mA to 15 mA (see Figure 1)
mV
µA
TLV431C/I
55
80
TLV431Q
55
100
0.001
0.1
µA
0.25
0.4
Ω
A
µA
NOTES: 4. Full temperature ranges are − 40°C to 125°C for TLV431Q, − 40°C to 85°C for TLV431I, and 0°C to 70°C for TLV431C.
5. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values
obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, αVREF,
is defined as:
V
REF(dev)
10 6
VREF (T A+25°C)
ŤαV REFŤ ppm +
∆T
°C
A
ǒ Ǔ
ǒ
Ǔ
where ∆TA is the rated operating free-air temperature range of the device.
αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the
lower temperature.
∆V
KA
6. The dynamic impedance is defined as z
+
ka
∆I
K
Ť Ť
When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined
as:
z Ȁ + ∆V [ z
1 ) R1
ka
ka
∆I
R2
Ť Ť
6
Ť Ť
ǒ
Ǔ
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
TLV431A electrical characteristics at 25°C free-air temperature (unless otherwise noted)
TLV431A
PARAMETER
TEST CONDITIONS
TA = 25°C
VREF
VKA = VREF,
IK = 10 mA
Reference voltage
TA = full range
(see Note 3 and
Figure 1)
∆VREF
∆VKA
Iref
TYP
MAX
1.228
1.24
1.252
TLV431AC
1.221
1.259
TLV431AI
1.215
1.265
TLV431AQ
1.209
TLV431AC
VREF(dev)
MIN
UNIT
V
1.271
4
12
TLV431AI
6
20
TLV431AQ
11
31
Ratio of VREF change in cathode
VKA = VREF to 6 V, IK = 10 mA (see Figure 2)
voltage change
−1.5
−2.7
mV/V
Reference terminal current
0.15
0.5
µA
0.05
0.3
0.1
0.4
0.15
0.5
VREF deviation over full
temperature range (see Note 4)
Iref(dev)
Iref deviation over full
temperature range (see Note 4)
IK(min)
Minimum cathode current for
regulation
IK(off)
Off-state cathode current
|zKA|
Dynamic impedance
(see Note 5)
VKA = VREF, IK = 10 mA
(see Note 3 and Figure 1)
IK = 10 mA, R1 = 10 kΩ, R2 = open (see Figure 2)
TLV431AC
IK = 10 mA, R1 = 10 kΩ, R2 = open
TLV431AI
(see Note 3 and Figure 2)
TLV431AQ
VKA = VREF (see Figure 1)
mV
µA
TLV431AC/AI
55
80
TLV431AQ
55
100
0.001
0.1
µA
0.25
0.4
Ω
VREF = 0, VKA = 6 V (see Figure 3)
VKA = VREF, f ≤ 1 kHz,
IK = 0.1 mA to 15 mA (see Figure 1)
A
µA
NOTES: 3. Full temperature ranges are − 40°C to 125°C for TLV431AQ, − 40°C to 85°C for TLV431AI, and 0°C to 70°C for TLV431AC.
4. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values
obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, αVREF,
is defined as:
V
REF(dev)
10 6
VREF (T A+25°C)
ŤαV REFŤ ppm +
∆T
°C
A
ǒ Ǔ
ǒ
Ǔ
where ∆TA is the rated operating free-air temperature range of the device.
αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the
lower temperature.
∆V
KA
5. The dynamic impedance is defined as z
+
ka
∆I
K
Ť Ť
When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined
as:
z Ȁ + ∆V [ z
1 ) R1
ka
ka
∆I
R2
Ť Ť
Ť Ť
ǒ
Ǔ
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
TLV431B electrical characteristics at 25°C free-air temperature (unless otherwise noted)
TLV431B
PARAMETER
TEST CONDITIONS
TA = 25°C
VREF
VKA = VREF,
IK = 10 mA
Reference voltage
TA = full range
(see Note 3 and
Figure 1)
VREF(dev)
∆VREF
∆VKA
Iref
VKA = VREF, IK = 10 mA
(see Note 3 and Figure 1)
Iref(dev)
Iref deviation over full
temperature range (see Note 4)
IK(min)
Minimum cathode current for
regulation
IK(off)
Off-state cathode current
|zKA|
Dynamic impedance
(see Note 5)
VREF = 0, VKA = 6 V (see Figure 3)
VKA = VREF, f ≤ 1 kHz,
IK = 0.1 mA to 15 mA (see Figure 1)
1.234
1.24
1.246
1.253
TLV431BI
1.224
1.259
TLV431BQ
1.221
UNIT
V
1.265
4
12
TLV431BI
6
20
TLV431BQ
11
31
−1.5
−2.7
mV/V
0.1
0.5
µA
0.05
0.3
0.1
0.4
0.15
0.5
55
100
µA
0.001
0.1
µA
0.25
0.4
Ω
IK = 10 mA, R1 = 10 kΩ, R2 = open (see Figure 2)
TLV431BC
IK = 10 mA, R1 = 10 kΩ, R2 = open
TLV431BI
(see Note 3 and Figure 2)
TLV431BQ
VKA = VREF (see Figure 1)
MAX
1.227
Ratio of VREF change in cathode
VKA = VREF to 6 V, IK = 10 mA (see Figure 2)
voltage change
Reference terminal current
TYP
TLV431BC
TLV431BC
VREF deviation over full
temperature range (see Note 4)
MIN
mV
µA
NOTES: 3. Full temperature ranges are − 40°C to 125°C for TLV431BQ, − 40°C to 85°C for TLV431BI, and 0°C to 70°C for TLV431BC.
4. The deviation parameters VREF(dev) and Iref(dev) are defined as the differences between the maximum and minimum values
obtained over the rated temperature range. The average full-range temperature coefficient of the reference input voltage, αVREF,
is defined as:
V
REF(dev)
10 6
VREF (T A+25°C)
ppm
ŤαV REFŤ
+
∆T
°C
A
ǒ Ǔ
ǒ
Ǔ
where ∆TA is the rated operating free-air temperature range of the device.
αVREF can be positive or negative, depending on whether minimum VREF or maximum VREF, respectively, occurs at the
lower temperature.
∆V
KA
5. The dynamic impedance is defined as z ka +
∆I
K
Ť Ť
When the device is operating with two external resistors (see Figure 2), the total dynamic impedance of the circuit is defined
as:
z Ȁ + ∆V [ z
1 ) R1
ka
ka
∆I
R2
Ť Ť
8
Ť Ť
ǒ
Ǔ
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION
Input
VO
Input
VO
IK
IK
R1
R2
VREF
Figure 1. Test Circuit for VKA = VREF,
VO = VKA = VREF
Input
Iref
VREF
Figure 2. Test Circuit for VKA > VREF,
VO = VKA = VREF × (1 + R1/R2) + Iref × R1
VO
IK(off)
Figure 3. Test Circuit for IK(off)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION†
REFERENCE VOLTAGE
vs
JUNCTION TEMPERATURE
1.254
IK = 10 mA
V ref − Reference Voltage − V
1.252
1.250
1.248
1.246
1.244
1.242
1.240
1.238
−50
−25
0
25
50
75
100
125
150
TJ − Junction Temperature − °C
Figure 4
REFERENCE INPUT CURRENT
vs
JUNCTION TEMPERATURE
(for TLV431 and TLV431A)
REFERENCE INPUT CURRENT
vs
JUNCTION TEMPERATURE
(for TLV431B)
250
IK = 10 mA
R1 = 10 kΩ
R2 = Open
230
I ref − Reference Input Current − nA
I ref − Reference Input Current − nA
250
200
150
100
210
IK = 10 mA
R1 = 10 kΩ
R2 = Open
190
170
150
130
110
90
70
50
−50
−25
0
25
50
75 100 125
TJ − Junction Temperature − °C
Figure 5A
50
−50
150
−25
0
25
50
75
100
125
150
TJ − Junction Temperature − °C
Figure 5
Figure 5B
† Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.
10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION†
CATHODE CURRENT
vs
CATHODE VOLTAGE
CATHODE CURRENT
vs
CATHODE VOLTAGE
15
250
VKA = VREF
TA = 25°C
VKA = VREF
TA = 25°C
200
10
I K − Cathode Current − µ A
I K − Cathode Current − mA
150
5
0
−5
100
50
0
−50
−100
−150
−10
−200
−15
−1
−0.5
0
0.5
1
VKA − Cathode Voltage − V
−250
−1
1.5
−0.5
0
0.5
1
VKA − Cathode Voltage − V
Figure 6
Figure 7
OFF-STATE CATHODE CURRENT
vs
JUNCTION TEMPERATURE
(for TLV431 and TLV431A)
OFF-STATE CATHODE CURRENT
vs
JUNCTION TEMPERATURE
(for TLV431B)
3000
VKA = 5 V
VREF = 0
I K(off) − Off-State Cathode Current − nA
I K(off) − Off-State Cathode Current − nA
40
30
20
10
0
−50
1.5
−25
0
25
50
75
100
125
2500
VKA = 6 V
VREF = 0
2000
1500
1000
500
0
−50
150
−25
25
50
75
100
125
150
TJ − Junction Temperature − °C
TJ − Junction Temperature − °C
Figure 8A
0
Figure 8
Figure 8B
† Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION†
RATIO OF DELTA REFERENCE VOLTAGE
TO DELTA CATHODE VOLTAGE
vs
JUNCTION TEMPERATURE
(for TLV431 and TLV431A)
RATIO OF DELTA REFERENCE VOLTAGE
TO DELTA CATHODE VOLTAGE
vs
JUNCTION TEMPERATURE
(for TLV431B)
−0.0
0
∆V ref/ ∆V KA − Ratio of Delta Reference Voltage
to Delta Cathode Voltage − mV/V
∆V ref/ ∆V KA − Ratio of Delta Reference Voltage
to Delta Cathode Voltage − mV/V
0
−0.1
−0.2
−0.3
−0.4
−0.5
−0.6
−0.7
−0.8
−50
IK = 10 mA
∆VKA = VREF to 6 V
−25
0
25
50
75
100
125
150
−0.1
IK = 10 mA
∆VKA = VREF to 6 V
−0.2
−0.3
−0.4
−0.5
−0.6
−0.7
−0.8
−0.9
−1
−1.0
−50
−25
25
50
75
100
125
150
TJ − Junction Temperature − °C
TJ − Junction Temperature − °C
Figure 9A
0
Figure 9B
Figure 9
PERCENTAGE CHANGE IN VREF
vs
OPERATING LIFE AT 55°C
0.025
V ref − %
Percentage Change in Vref
IK = 1 mA
0
% Change (avg)
−0.025
% Change (3δ)
−0.05
−0.075
−0.1
% Change (−3δ)
−0.125
0
10
20
30
40
50
60
Operating Life at 55°C − kh‡
‡ Extrapolated from life-test data taken at 125°C; the activation energy assumed is 0.7 eV.
Figure 10
† Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.
12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
3V
Vn − Equivalent Input Noise Voltage − nV/ Hz
350
VKA = VREF
IK = 1 mA
TA = 25°C
1 kΩ
300
470 µF
+
250
TLV431
or
TLV431A
or
TLV431B
200
750 Ω
2200 µF
+
820 Ω
TLE2027
+
_
TP
160 kΩ
160 Ω
TEST CIRCUIT FOR EQUIVALENT INPUT NOISE VOLTAGE
150
10
100
1k
10k
100k
f − Frequency − Hz
Figure 11
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION
EQUIVALENT INPUT NOISE VOLTAGE
OVER A 10-s PERIOD
Vn − Equivalent Input Noise Voltage − µ V
10
f = 0.1 Hz to 10 Hz
IK = 1 mA
TA = 25°C
8
6
4
2
0
−2
−4
−6
−8
−10
0
2
4
6
8
10
t − Time − s
3V
1 kΩ
470 µF
+
750 Ω
0.47 µF
2200 µF
+
820 Ω
TLV431
or
TLV431A
or
TLV431B
TLE2027
10 kΩ
+
_
10 kΩ
1 µF
160 kΩ
TLE2027
+
_
2.2 µF
+
CRO 1 MΩ
33 kΩ
16 Ω
0.1 µF
33 kΩ
TEST CIRCUIT FOR 0.1-Hz TO 10-Hz EQUIVALENT NOISE VOLTAGE
Figure 12
14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TP
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION
80
0°
IK = 10 mA
TA = 25°C
70
36°
60
72°
50
108°
40
144°
30
180°
Phase Shift
A V − Small-Signal Voltage Gain/Phase Margin − dB
SMALL-SIGNAL VOLTAGE GAIN/PHASE MARGIN
vs
FREQUENCY
Output
IK
6.8 kΩ
180 Ω
10 µF
5V
4.3 kΩ
20
10
GND
0
−10
−20
100
TEST CIRCUIT FOR VOLTAGE GAIN
AND PHASE MARGIN
1k
10k
100k
1M
f − Frequency − Hz
Figure 13
REFERENCE IMPEDANCE
vs
FREQUENCY
100
|z ka | − Reference Impedance − Ω
IK = 0.1 mA to 15 mA
TA = 25°C
100 Ω
Output
10
IK
100 Ω
1
−
+
GND
0.1
TEST CIRCUIT FOR REFERENCE IMPEDANCE
0.01
1k
10k
100k
1M
10M
f − Frequency − Hz
Figure 14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION
PULSE RESPONSE 1
3.5
3
Input and Output Voltage − V
R = 18 kΩ
TA = 25°C
Input
18 kΩ
Output
2.5
Ik
2
1.5
Pulse
Generator
f = 100 kHz
Output
50 Ω
1
GND
0.5
0
TEST CIRCUIT FOR PULSE RESPONSE 1
−0.5
0
1
2
3
4
5
6
7
8
t − Time − µs
Figure 15
PULSE RESPONSE 2
3.5
3
Input and Output Voltage − V
R = 1.8 kΩ
TA = 25°C
Input
1.8 kΩ
Output
2.5
IK
2
1.5
Pulse
Generator
f = 100 kHz
Output
1
GND
0.5
0
TEST CIRCUIT FOR PULSE RESPONSE 2
−0.5
0
1
2
3
4
5
6
7
8
t − Time − µs
Figure 16
16
50 Ω
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
PARAMETER MEASUREMENT INFORMATION†
STABILITY BOUNDARY CONDITION‡
(for TLV431B)
STABILITY BOUNDARY CONDITION‡
(for TLV431 and TLV431A)
15
15
TA = 25°C
VKA = VREF
12
9
Stable
Stable
VKA = 2 V
6
VKA = 3 V
VKA = 3 V
0.1
1
TA = 25°C
IK = 15 mA MAX
For VKA = VREF ,
Stable for CL = 1 pF to 10k nF
0
0.001
10
0.01
CL − Load Capacitance − µF
0.1
1
10
CL − Load Capacitance − µF
150 Ω
150 Ω
IK
IK
+
CL
Unstable
6
3
0.01
VKA = 2 V
9
3
0
0.001
Stable
Stable
I K − Cathode Current − mA
12
I K − Cathode Current − mA
IK = 15 mA Max
−
R1 = 10 kΩ
CL
Vbat
R2
+
−
Vbat
TEST CIRCUIT FOR VKA = VREF
TEST CIRCUIT FOR VKA = 2 V, 3 V
‡ The areas under the curves represent conditions that may cause the device to oscillate. For VKA = 2-V and 3-V curves, R2 and Vbat were adjusted
to establish the initial VKA and IK conditions with CL = 0. Vbat and CL then were adjusted to determine the ranges of stability.
Figure 17
† Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
17
SLVS139R − JULY 1996 − REVISED SEPTEMBER 2005
APPLICATION INFORMATION
~
VI
120 V
−
+
P
~
VO
3.3 V
P
P
Gate Drive
VCC
Controller
VFB
TLV431
or
TLV431A
or
TLV431B
Current
Sense
GND
P
P
P
P
Figure 18. Flyback With Isolation Using TLV431, TLV431A, or TLV431B
as Voltage Reference and Error Amplifier
Figure 18 shows the TLV431, TLV431A, or TLV431B used in a 3.3-V isolated flyback supply. Output voltage VO
can be as low as reference voltage VREF (1.24 V ± 1%). The output of the regulator, plus the forward voltage
drop of the optocoupler LED (1.24 + 1.4 = 2.64 V), determine the minimum voltage that can be regulated in an
isolated supply configuration. Regulated voltage as low as 2.7 Vdc is possible in the topology shown in
Figure 18.
18
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
12-Sep-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TLV431ACDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431ACDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431ACDBVRG4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431ACDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431ACDBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431ACDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431ACDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
TLV431ACLP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431ACLPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431AID
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDE4
ACTIVE
SOIC
D
8
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDRE4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
75
TLV431AILP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431AILPM
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431AILPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431AQPK
ACTIVE
SOT-89
PK
3
1000
TBD
CU SNPB
Level-1-220C-UNLIM
TLV431BCDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
12-Sep-2005
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TLV431BCDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDCKRE4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDCKTE4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
TLV431BCLP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BCLPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TBD
TLV431BCPK
ACTIVE
SOT-89
PK
3
1000
CU SNPB
Level-1-220C-UNLIM
TLV431BIDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDCKRE4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDCKTE4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BILP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BILPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BIPK
ACTIVE
SOT-89
PK
3
1000
TBD
CU SNPB
Level-1-220C-UNLIM
TLV431BQDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBVT
ACTIVE
SOT-23
DBV
5
250
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 2
Green (RoHS &
no Sb/Br)
PACKAGE OPTION ADDENDUM
www.ti.com
12-Sep-2005
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TLV431BQDBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDCKRE4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDCKTE4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQLP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BQLPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BQPK
ACTIVE
SOT-89
PK
3
1000
TBD
CU SNPB
Level-1-220C-UNLIM
TLV431CDBV
OBSOLETE
SOT-23
DBV
5
TBD
CU SNPB
Level-1-260C-UNLIM
TLV431CDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431CDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431CDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431CDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
TLV431CLP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431CLPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431IDBV
OBSOLETE
SOT-23
DBV
5
TBD
Call TI
TLV431IDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431IDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431IDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431IDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Call TI
TLV431ILP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431ILPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431QPK
ACTIVE
SOT-89
PK
3
1000
TBD
CU SNPB
Level-1-220C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
12-Sep-2005
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com
27-Sep-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TLV431ACDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
Call TI
Level-1-260C-UNLIM
TLV431ACDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431ACDBVRG4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
Call TI
Level-1-260C-UNLIM
TLV431ACDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
Call TI
Level-1-260C-UNLIM
TLV431ACDBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
Call TI
Level-1-260C-UNLIM
TLV431ACDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431ACDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
TLV431ACLP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431ACLPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431AID
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBVT
ACTIVE
SOT-23
DBV
5
250
Call TI
Level-1-260C-UNLIM
TLV431AIDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDE4
ACTIVE
SOIC
D
8
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431AIDRE4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
75
Green (RoHS &
no Sb/Br)
TLV431AILP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431AILPM
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431AILPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431AQPK
ACTIVE
SOT-89
PK
3
1000
TBD
CU SNPB
Level-1-220C-UNLIM
TLV431BCDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
27-Sep-2005
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TLV431BCDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDCKRE4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BCDCKTE4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
TLV431BCLP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BCLPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TBD
TLV431BCPK
ACTIVE
SOT-89
PK
3
1000
CU SNPB
Level-1-220C-UNLIM
TLV431BIDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDCKRE4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BIDCKTE4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BILP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BILPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BIPK
ACTIVE
SOT-89
PK
3
1000
TBD
CU SNPB
Level-1-220C-UNLIM
TLV431BQDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBVT
ACTIVE
SOT-23
DBV
5
250
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 2
Green (RoHS &
no Sb/Br)
PACKAGE OPTION ADDENDUM
www.ti.com
27-Sep-2005
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TLV431BQDBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBZT
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDBZTG4
ACTIVE
SOT-23
DBZ
3
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDCKRE4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQDCKTE4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431BQLP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BQLPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431BQPK
ACTIVE
SOT-89
PK
3
1000
TBD
CU SNPB
Level-1-220C-UNLIM
TLV431CDBV
OBSOLETE
SOT-23
DBV
5
TBD
CU SNPB
Level-1-260C-UNLIM
TLV431CDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
Call TI
Level-1-260C-UNLIM
TLV431CDBVT
ACTIVE
SOT-23
DBV
5
250
Call TI
Level-1-260C-UNLIM
TLV431CDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431CDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
Lead/Ball Finish
MSL Peak Temp (3)
TLV431CLP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431CLPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431IDBV
OBSOLETE
SOT-23
DBV
5
TBD
Call TI
Call TI
TLV431IDBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
Call TI
Level-1-260C-UNLIM
TLV431IDBVT
ACTIVE
SOT-23
DBV
5
250
Call TI
Level-1-260C-UNLIM
TLV431IDBZR
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV431IDBZRG4
ACTIVE
SOT-23
DBZ
3
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
TLV431ILP
ACTIVE
TO-92
LP
3
1000
TBD
CU SNPB
Level-NC-NC-NC
TLV431ILPR
ACTIVE
TO-92
LP
3
2000
TBD
CU SNPB
Level-NC-NC-NC
TLV431QPK
ACTIVE
SOT-89
PK
3
1000
TBD
CU SNPB
Level-1-220C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
27-Sep-2005
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 4
MECHANICAL DATA
MPDS114 – FEBRUARY 2002
DCK (R-PDSO-G6)
PLASTIC SMALL-OUTLINE PACKAGE
0,30
0,15
0,65
6
0,10 M
4
1,40
1,10
1
0,13 NOM
2,40
1,80
3
Gage Plane
2,15
1,85
0,15
0°–8°
0,46
0,26
Seating Plane
1,10
0,80
0,10
0,00
0,10
4093553-3/D 01/02
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion.
Falls within JEDEC MO-203
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.205 (5,21)
0.175 (4,44)
0.165 (4,19)
0.125 (3,17)
DIA
0.210 (5,34)
0.170 (4,32)
Seating
Plane
0.157 (4,00) MAX
0.050 (1,27)
C
0.500 (12,70) MIN
0.104 (2,65)
FORMED LEAD OPTION
0.022 (0,56)
0.016 (0,41)
0.016 (0,41)
0.014 (0,35)
STRAIGHT LEAD OPTION
D
0.135 (3,43) MIN
0.105 (2,67)
0.095 (2,41)
0.055 (1,40)
0.045 (1,14)
1
2
3
0.105 (2,67)
0.080 (2,03)
0.105 (2,67)
0.080 (2,03)
4040001-2 /C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Lead dimensions are not controlled within this area
D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92)
E. Shipping Method:
Straight lead option available in bulk pack only.
Formed lead option available in tape & reel or ammo pack.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MECHANICAL DATA
MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.539 (13,70)
0.460 (11,70)
1.260 (32,00)
0.905 (23,00)
0.650 (16,50)
0.610 (15,50)
0.020 (0,50) MIN
0.098 (2,50)
0.384 (9,75)
0.335 (8,50)
0.748 (19,00)
0.217 (5,50)
0.433 (11,00)
0.335 (8,50)
0.748 (19,00)
0.689 (17,50)
0.114 (2,90)
0.094 (2,40)
0.114 (2,90)
0.094 (2,40)
0.169 (4,30)
0.146 (3,70)
DIA
0.266 (6,75)
0.234 (5,95)
0.512 (13,00)
0.488 (12,40)
TAPE & REEL
4040001-3 /C 10/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Tape and Reel information for the Format Lead Option package.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2005, Texas Instruments Incorporated