P6SMB SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE 5.5 to 214 Volts PEAK PULSE POWER 600 Watts SMB/DO-214AA Unit: inch (mm) FEATURES .083(2.11) .185(4.70) .160(4.06) .083(2.13) .096(2.44) .012(.305) .006(.152) MECHANICAL DATA • • • • • .075(1.91) .155(3.94) .130(3.30) • For surface mounted applications in order to optimize board space. • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Typical ID less than 1.0µA above 10V • Plastic package has Underwriters Laboratory Fammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • In compliance with EU RoHS 2002/95/EC directives .050(1.27) .030(0.76) Case: JEDEC DO-214AA ,Molded plastic over passivated junction Terminals: Solder plated,solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes positive end (cathode) Standard Packaging:12mm tape (EIA-481) Weight: 0.003 ounce, 0.093 gram .008(.203) .002(.051) .220(5.59) .200(5.08) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. R ating Symbol Value Uni ts Peak Pulse Power D i ssi pati on on 10/1000uS waveform (Notes 1,2, Fi g.1) P PPM 600 Watts Peak Forward Surge C urrent 8.3ms si ngle half si ne-wave superi mposed on rated load (JED EC Method) (Notes 2,3) IFSM 100 Amps Peak Pulse C urrent on 10/1000us waveform(Note 1)Fi g.3 IPPM see Table 1 Amps TJ,TSTG -55 to +150 Operati ng Juncti on and Storage Temperature Range O C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above T A = 25 O C per Fig. 2. 2. Mounted on 5.0mm 2 (0.13mm thick) land areas. 3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. STAD-MAY.25.2007 PAGE . 1 P6SMB SERIES Part N umber UNI BI V BR @ IT V R WM V IR @ VRWM VC @ IPP Marki ng C ode Min . Ma x . IT U N I- B I- V V mA µA µA V A UNI BI 600W Transient Voltage Suppressor P6SMB6.8 P6SMB6.8C 5.5 6.12 7.48 10 1000 2000 10.8 56 EZA D ZA P6SMB6.8A P6SMB6.8C A 5.8 6.45 7.14 10 1000 2000 10.5 57 EZB D ZB P6SMB7.5 P6SMB7.5C 6.05 6.75 8.25 10 500 1000 11.7 51 EZC D ZC P6SMB7.5A P6SMB7.5C A 6.4 7.13 7.88 10 500 1000 11.3 53 EZD D ZD P6SMB8.2 P6SMB8.2C 6.63 7.38 9.02 10 200 400 12.5 48 EZE D ZE P6SMB8.2A P6SMB8.2C A 7.02 7.79 8.61 10 200 400 12.1 50 EZF D ZF P6SMB9.1 P6SMB9.1C 7.37 8.19 10 1 50 100 13.8 44 EZG D ZG P6SMB9.1A P6SMB9.1C A 7.78 8.65 9.5 1 50 100 13.4 45 EZH D ZH P6SMB10 P6SMB10C 8.1 9 11 1 10 20 15 40 EZJ D ZJ P6SMB10A P6SMB10C A 8.55 9.5 10.5 1 10 20 14.5 41 EZK D ZK P6SMB11 P6SMB11C 8.92 9.9 12.1 1 5 10 16.2 37 EZL D ZL P6SMB11A P6SMB11C A 9.4 10.5 11.6 1 5 10 15.6 38 EZM D ZM P6SMB12 P6SMB12C 9.72 10.8 13.2 1 5 5 17.3 35 EZN D ZN P6SMB12A P6SMB12C A 10.2 11.4 12.6 1 5 5 16.7 36 EZP D ZP P6SMB13 P6SMB13C 10.5 11.7 14.3 1 5 5 19 32 EZQ D ZQ P6SMB13A P6SMB13C A 11.1 12.4 13.7 1 5 5 18.2 33 EZR D ZR P6SMB15 P6SMB15C 12.1 13.5 16.5 1 5 5 22 27 EZS D ZS P6SMB15A P6SMB15C A 12.8 14.3 15.8 1 5 5 21.2 28 EZT D ZT P6SMB16 P6SMB16C 12.9 14.4 17.6 1 5 5 23.5 26 EZU D ZU P6SMB16A P6SMB16C A 13.6 15.2 16.8 1 5 5 22.5 27 EZV D ZV P6SMB18 P6SMB18C 14.5 16.2 19.8 1 5 5 26.5 23 EZW D ZW P6SMB18A P6SMB18C A 15.3 17.1 18.9 1 5 5 25.2 24 EZX D ZX P6SMB20 P6SMB20C 16.2 18 22 1 5 5 29.1 21 EZY D ZY P6SMB20A P6SMB20C A 17.1 19 21 1 5 5 27.7 22 EZZ D ZZ P6SMB22 P6SMB22C 17.8 19.8 24.2 1 5 5 31.9 19 EXA D XA P6SMB22A P6SMB22C A 18.8 20.9 23.1 1 5 5 30.6 20 EXB D XB P6SMB24 P6SMB24C 19.4 21.6 26.4 1 5 5 34.7 17 EXC D XC P6SMB24A P6SMB24C A 20.5 22.8 25.2 1 5 5 33.2 18 EXD D XD P6SMB27 P6SMB27C 21.8 24.3 29.7 1 5 5 39.1 15 EXE D XE P6SMB27A P6SMB27C A 23.1 25.7 28.4 1 5 5 37.5 16 EXF D XF P6SMB30 P6SMB30C 24.3 27 33 1 5 5 43.5 14 EXG D XG P6SMB30A P6SMB30C A 25.6 28.5 31.5 1 5 5 41.4 14.4 EXH D XH P6SMB33 P6SMB33C 26.8 29.7 36.3 1 5 5 47.7 12.6 EXJ D XJ P6SMB33A P6SMB33C A 28.2 31.4 34.7 1 5 5 45.7 13.2 EXK D XK P6SMB36 P6SMB36C 29.1 32.4 39.6 1 5 5 52 11.6 EXL D XL P6SMB36A P6SMB36C A 30.8 34.2 37.8 1 5 5 49.9 12 EXM D XM P6SMB39 P6SMB39C 31.6 35.1 42.9 1 5 5 56.4 10.6 EXN D XN P6SMB39A P6SMB39C A 33.3 37.1 41 1 5 5 53.9 11.2 EXP D XP P6SMB43 P6SMB43C 34.8 38.7 47.3 1 5 5 61.9 9.6 EXQ D XQ STAD-MAY.25.2007 PAGE . 2 P6SMB SERIES Part N umber UNI BI V BR @ IT V R WM IR @ VRWM VC @ IPP Marki ng C ode Min . Ma x . IT U N I- B I- V V mA µA µA V A UNI BI 36.8 40.9 45.2 1 5 5 59.3 10.1 EXR D XR V 600W Transient Voltage Suppressor P6SMB43A P6SMB43C A P6SMB47 P6SMB47C 38.1 42.3 51.7 1 5 5 67.8 8.9 EXS D XS P6SMB47A P6SMB47C A 40.2 44.7 49.4 1 5 5 64.8 9.3 EXT D XT P6SMB51 P6SMB51C 41.3 45.9 56.1 1 5 5 73.5 8.2 EXU D XU P6SMB51A P6SMB51C A 43.6 48.5 53.6 1 5 5 70.1 8.6 EXV D XV P6SMB56 P6SMB56C 45.6 50.4 61.6 1 5 5 80.5 7.4 EXW D XW P6SMB56A P6SMB56C A 47.8 53.2 58.8 1 5 5 77 7.8 EXX D XX P6SMB62 P6SMB62C 50.2 55.8 68.2 1 5 5 89 6.8 EXY D XY P6SMB62A P6SMB62C A 53 58.9 65.1 1 5 5 85 7.1 EXZ D XZ P6SMB68 P6SMB68C 55.1 61.2 74.8 1 5 5 98 6.1 EYA D YA P6SMB68A P6SMB68C A 58.1 64.6 71.4 1 5 5 92 6.5 EYB D YB P6SMB75 P6SMB75C 60.7 67.5 82.5 1 5 5 108 5.5 EYC D YC P6SMB75A P6SMB75C A 64.1 71.3 78.8 1 5 5 103 5.8 EYD D YD P6SMB82 P6SMB82C 66.4 73.8 90.2 1 5 5 118 5.1 EYE D YE P6SMB82A P6SMB82C A 70.1 77.9 86.1 1 5 5 113 5.3 EYF D YF P6SMB91 P6SMB91C 73.7 81.9 100 1 5 5 131 4.5 EYG D YG P6SMB91A P6SMB91C A 77.8 86.5 95.5 1 5 5 125 4.8 EYH D YH P6SMB100 P6SMB100C 81 90 110 1 5 5 144 4.2 EYJ D YJ P6SMB100A P6SMB100C A 85.5 95 105 1 5 5 137 4.4 EYK D YK P6SMB110 P6SMB110C 89.2 99 121 1 5 5 158 3.8 EYL D YL P6SMB110A P6SMB110C A 94 105 116 1 5 5 152 4 EYM D YM P6SMB120 P6SMB120C 97.2 108 132 1 5 5 173 3.5 EYN D YN P6SMB120A P6SMB120C A 102 114 126 1 5 5 165 3.6 EYP D YP P6SMB130 P6SMB130C 105 117 143 1 5 5 187 3.2 EYQ D YQ P6SMB130A P6SMB130C A 111 124 137 1 5 5 179 3.3 EYR D YR P6SMB150 P6SMB150C 121 135 165 1 5 5 215 2.8 EYS D YS P6SMB150A P6SMB150C A 128 143 158 1 5 5 207 2.9 EYT D YT P6SMB160 P6SMB160C 130 144 176 1 5 5 230 2.6 EYU D YU P6SMB160A P6SMB160C A 136 152 168 1 5 5 219 2.7 EYV D YV P6SMB170 P6SMB170C 138 153 187 1 5 5 244 2.5 EYW D YW P6SMB170A P6SMB170C A 145 162 179 1 5 5 234 2.6 EYX D YX P6SMB180 P6SMB180C 146 162 198 1 5 5 258 2.3 EYY D YY P6SMB180A P6SMB180C A 154 171 189 1 5 5 246 2.4 EYZ D YZ P6SMB200 P6SMB200C 162 180 220 1 5 5 287 2.1 EWA D WA P6SMB200A P6SMB200C A 171 190 210 1 5 5 274 2.2 EWB D WB P6SMB220 P6SMB220C 175 198 242 1 5 5 344 1.8 EWC D WC P6SMB220A P6SMB220C A 185 209 231 1 5 5 328 1.9 EWD D WD P6SMB250 P6SMB250C 202 225 275 1 5 5 360 1.7 EWE D WE P6SMB250A P6SMB250C A 214 237 263 1 5 5 344 1.8 EWF D WF STAD-MAY.25.2007 PAGE . 3 P PPM ,PEAK PULSE FORWARD,KW P6SMB SERIES 100 Non-Repetitve Pulse Wavefom Shown in Figure.3 T A = 25 OC 10 1.0 Mounted on 5.0mm Copper Land Areas 0.1 0.1 10 1.0 100 1000 10000 PEAK PULSE FORWARD (P PP) OR CURRENT (I PP) DERATING IN PERCENTAGE % 100 75 50 25 0 0 25 td,PULSE WIDTH, micro sec 100 125 150 175 200 O Fig.2 DERATING CURVE 150 6,000 tf = 10usec Peak Value Ippm 100 2,000 Ha lf Va lue -Ip p 2 10/1000u se c Wa ve fo rm a s De fine d b ye R.E.A. 50 e -kt td 0 Tj= 25 C f= 1.0MHZ Vsig = 50m Vp -p 4,000 O T A = 25 C Pulse Width (td) is Defined as the Point where the Peak Current Decayst to 50% of Ipp 1.0 2.0 3.0 4.0 C J ,CAPACITANCE,p F I PPM ,PEAK PULSE CURRENT,% 75 T A ,AMBIENT TEMPERATURE, C Fig.1 PEAK PULSE POWER RATING CURVE 0 50 Me a sure d a t Ze ro Bia s 1,000 800 600 400 Me a sure d a t Sta nd -Off Vo lta Ge (VRWM) 200 T,TIME,ms 100 80 60 Fig.3 PULSE WAVEFORM 40 I FSM ,PEAK FORWARD SURGE CURRENT, AMPERES 20 200 TJ= TJm a x 8.3m s Sing le Ha lf Sine -Wa ve JEDEC M e tho d 10 1.0 100 2.0 5.0 10 20 50 100 200 V (BR) , BREAKDOWN VOLTAGE, VOLTS 50 Fig.4 TYPICAL CAPACITANCE 10 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz Fig.5 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PLEASE REFER THE TVS APPLICATION NOTE IN PANJIT WEBSITE http://www.panjit.com/protection-transient-voltage-suppressors.html STAD-MAY.25.2007 PAGE . 4 P6SMB SERIES MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5Kper 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2007 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. STAD-MAY.25.2007 PAGE . 5