Features Unregulated Converters ● ● ● ● ● ● ● INNOLINE Triple Outputs (-24V, -48V &-72V) Input/Output 1kVDC Isolation Industrial Temperature Range UL94V-0 Package Material Internal SMD Construction No External Components required Efficiency to 80% DC/DC-Converter RxxTR... Series Selection Guide 5V and 12V Input Types Part Number Nom. Input Voltage SIP 8 Output Rated Output Voltage (VDC) R05TR244872 5 R12TR244872 12 (VDC) -24 -48 -72 -24 -48 -72 Vo1 Vo2 Vo3 Vo1 Vo2 Vo3 Output Current 1) Min Full Load Load (mA) 1.4 0.7 0.5 1.4 0.7 0.5 (mA) 42 21 14 42 21 14 Output Current 2) Min Full Load Load (mA) 4.2 2.1 1.4 4.2 2.1 1.4 3 Watt SIP8 Triple Output (mA) 126 63 42 126 63 42 1). Assuming all 3 channels are equally loaded. 2). Assuming only 1 channel is loaded. Absolute Maximum Ratings Input Voltage VIN 05V types 12V types 7VDC 15VDC Short Circuit Duration 3) 1s Control Voltage, SD VIN Operating Temperature Range (all output types) –40°C min. to +85°C Lead Temperature 1.5mm from Case for 10 seconds 300°C Output Power Delivery 3W 3). Supply voltage must be discontinued at the end of the short circuit duration. Specifications (measured at TA=25°C, at nominal input voltage and rated output current unless otherwise specified) Input Voltage Range VIN (continuous operation) 5V types 12V types 5V types 12V types Zero Load Input Current (ICCZL) 5V types, 0% output load 12V types, 0% output load 50mA typ. / 80mA max. 27.5mA typ. / 50mA max. Internal Power Dissipation (PDISS) 5V types, 0% output load 12V types, 0% output load 250mA typ. / 400mA max. 490mA typ. / 600mA max. Shut Down Operating Threshold Switch voltage (VSD) Sink current (ISD) 1.30V min. / 1.90V max. 170µA min. / 300µA max. Shut Down Pin Current Sink 5V types, VSD = 5.0V 12V types, VSD = 12.0V Input Quiescent Current During Shut Down Output Current (IOUT) From any single 24V output Single Channel Voltage Setpoint Accuracy 0.80mA min. / 1.10mA max. 0.80mA min. / 1.10mA max. 5V types, VSD = 5.0V 12V types, VSD = 12.0V Total Rated Power (POUT) Total of all outputs or any single output POUT = 100mW POUT = 3mW Derating-Graph 85mA 66mA 9mA typ. / 14mA max. 7mA typ. / 15mA max. 0.1W min. / 3.0W max. 4.2mA min. / 126mA max. (Ambient Temperature) 100 80 Output Power (%) Ripple Current (IRIPPLE) 4.5VDC min. / 5.5VDC max. 10.8VDC min. / 13.2VDC max. 60 40 Safe Operating Area 20 0 -40 0 50 85 Operating Temperature °C 100 150 0% min. / 10% max. 7.5% min. / 2.5% max. continued on next page 172 July-2006 www.recom-international.com INNOLINE RxxTR244872 Series DC/DC-Converter Specifications (measured at TA=25°C, at nominal input voltage and rated output current unless otherwise specified) Output Voltage (VOUT) - Vo1 POUT = 100mW POUT = 3W 24.0V min. / 26.4V max. 22.2 Vmin. / 24.6V max. Output Voltage (VOUT) - Vo2 POUT = 100mW POUT = 3W 48.0V min. / 52.8V max. 44.4V min. / 49.2V max. Output Voltage (VOUT) - Vo3 POUT = 100mW POUT = 3W 72.0V min. / 79.2V max. 66.6V min. / 73.8V max. Line Regulation (VIN = 90% to 110% of nominal ) 1.01% typ. / 1.2% max. Load Regulation (10% to 100% full load) POUT = 100mW to 3W 6% typ. / 15% max. Ripple and Noise (DC to 20MHz single channel, 24V) 400mVp-p max. Isolation Voltage (VISOL) (flash tested for 1 second) 1000VDC min. Isolation Capacitance (CISOL) 5V types, 1 MHz, 1V 12V types, 1 MHz, 1V 65pF 130pF Insulation Resistance (1000VDC test) 1 GΩ min. /10 GΩ typ. Leakage Current (IL) 5V types, 220V AC, 50Hz 12V types, 220V AC, 50Hz 4.5µA 10.4µA Efficiency (all channels or any single channel) 75% min. Switching Frequency (fOSC) 50kHz min. Oscillator Voltage Coefficient (fVCO) VIN = 90% to 110% of nominal 20% Package Weight 3.85 g Case Temperature Rise Above Ambient 1 litre static air chamber 27°C typ Output Voltage Temperature Coefficient (VTCO) TA = -40°C to TA = +85°C 15mV/°C typ. Oscillator Temperature Coefficient (fTCO) TA = -40°C to TA = +85°C 300Hz/°C typ. Operating Temperature (TA) –40°C min. / +85°C max. Storage Temperature Range MTBF (depending on the type) –50°C to +125°C max. 1) – 40°C +25°C +85°C } 174 x 10³hours min. 145 x 10³hours min. 121 x 10³hours min. Detailed Information see Application Notes chapter "MTBF" 1). Calculated using MIL-HDBK-217F with nominal input voltage at full load.Please contact us, if you need exact parameters for the converter you have selected. Typical Characteristics, Tolerance Envelope Tolerance Envelope Thermal Characterisation R05TR244872 R12TR244872 -60 -20 20 60 100 140 70 69 68 67 R12TR244872 86 1.6 82 1.2 78 74 20 -20 20 60 60 Temperature (°C) www.recom-international.com 100 140 Typica l Load L ine 100 140 +5% 0,5% 5% 10% 50% 100% Output Load Current (%) R12TR244872 2.0 Ripple Voltage (V) Efficiency (%) R05TR244872 -20 -60 Temperature (°C) Temperature (°C) -60 V Nom. Output Voltage 90 70 +4.5% 71 110 90 +10% 72 130 70 R05TR244872 R12TR244872 73 Output Voltage (V) Switching Frequenzcy (kHz) 150 R05TR244872 0.8 0.4 0 -60 -20 20 60 100 140 Temperature (°C) July-2006 173 INNOLINE RxxTR244872 Series DC/DC-Converter Typical Characteristics Channel Vo2 (nominal 48V) 100 80 80 80 60 60 60 40 40 40 20 Efficiency (%) 100 0 20 0.5 1.0 1.5 2.0 2.5 3.0 0 Output Power (W) 20 0 0.5 1.0 1.5 2.0 2.5 3.0 80 120 36 72 108 32 64 96 24 20 0 0.5 1.0 1.5 2.0 2.5 3.0 Output Power (W) Output Voltage (V) 40 28 56 48 40 0 0.5 1.0 1.5 2.0 2.5 3.0 Output Power (W) Output Power (W) Output Voltage (V) Output Voltage (V) Channel Vo3 (nominal 72V) 100 Efficiency (%) Efficiency (%) Channel Vo1 (nominal 24V) 0.5 1.0 1.5 2.0 2.5 3.0 Output Power (W) 84 72 60 0 0.5 1.0 1.5 2.0 2.5 3.0 Output Power (W) Package Style and Pinning (mm) 3rd angle projection 8 PIN SIP Package 21.80 11.10 9.20 RECOM R05TR244872 **** Triple Output RECOM R05TR244872 **** 0.50±0.05 4.10 1 2 3 0.50±0.05 2.54 Recommended Footprint Details 1.25 typ. 2.10 2.54 1.0ø+0.15/0 0.25±0.05 Bottom View 2.54 Top View 5 6 7 8 Pin Connections Pin # Triple 1 +Vin 2 -Vin 3 SD (Shut Down) 5 Com 6 Vo1 7 Vo2 8 Vo3 NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm 174 July-2006 www.recom-international.com