Features ● ● ● ● ● ● ● ● ● ● INNOLINE Efficiency up to 97%,Non isolated, no need for heatsinks Pin-out compatible with LM78XX Linears Very low profile( L*W*H=11.5*7.5*10.2 ) Wide input range.(4.75V ~ 34V) Short circuit protection, Thermal shutdown Non standard outputs available as specials between 1.5V ~15.5V Low ripple and noise DC/DC-Converter R-78xx-0.5 Series UL94V-0 Package Material EMC Certified See Positive-to Negative Converter Application Note for use as a voltage inverter (alternative to LM79xx Linear) 0.5 AMP SIP3 Single Output Selection Guide Part Number SIP3 Input Range (1) (V) Output Voltage (V) Output Current (A) Efficiency Min. Vin Max. Vin (%) (%) R-781.5-0.5 4.75 – 30 1.5 0.5 73 63 R-781.8-0.5 4.75 – 34 1.8 0.5 82 71 R-782.5-0.5 4.75 – 34 2.5 0.5 87 77 R-783.3-0.5 4.75 – 34 3.3 0.5 91 81 R-785.0-0.5 6.5 – 34 5.0 0.5 94 86 R-786.5-0.5 8.0 – 34 6.5 0.5 95 88 R-789.0-0.5 11 – 34 9.0 0.5 96 92 R-7812-0.5 15 – 34 12 0.5 97 94 R-7815-0.5 18 – 34 15 0.5 97 95 EN-55022 Certified EN-55034 Certified EN-60601-1-2 Certified Note 1:1.5V Output can be unstable with Vin>30VDC Description Derating-Graph The R-78xx-Series high efficiency switching regulators are ideally suited to replace 78xx linear regulators and are pin compatible. The efficiency of up to 97% means that very little energy is wasted as heat so there is no need for any heat sinks with their additional space and mounting costs. Low ripple and noise figures and a short circuit input current of typically only 7mA round off the specifications of this versatile converter series. This R-78xx-0.5 is fully certified to EN 60601-1-2 (Medical Equipment), EN 55022 (Emissions), and EN55024 (Immunity) EMC Standards. (Ambient Temperature) Output Power (%) 120 100 80 60 40 20 0 Safe Operating Area -40 0 25 50 Operating Temperature (°C) www.recom-international.com 27-March-2007 85 75 100 71 139 INNOLINE R-78xx-0.5 Series DC/DC-Converter Specifications ( typical at 25°C, 10% minimum load, unless otherwise specified ) Characteristics Input Voltage Range Conditions 1.5V 1.8V to 15.5V Min. 4.75 4.75 Typ. Max. 30.0V 34.0V Output Voltage Range (for customized parts) All Series 1.25 15.5V Output Current All Series 0 500mA Output Current Limit All Series Short Circuit Input Current All Series 2000mA 10 30mA Internal Power Dissipation 0.4W Short Circuit Protection Continuous, automatic recovery Output Voltage Accuracy (At 100% Load) Line Voltage Regulation (Vin = min. to max. at full load) Load Regulation (10 to 100% full load) Dynamic Load Stability Ripple & Noise (without Output Capacitor) Ripple & Noise (with Output Capacitor=100µF) Temperature Coefficient All Series 1.5V to 6.5V 9V to 15.5V 1.5V to 6.5V 9V to 15.5V 100% <-> 50% load 100% <-> 10% load 1.5V to 6.5V 9V to 15.5V 1.5V to 6.5V 9V to 15.5V ±2 0.2 0.1 0.4 0.25 ±75mV ±3% 0.4% 0.2% 0.6% 0.4% 20mVp-p 30mVp-p 15mVp-p 25mVp-p -40°C ~ +85°C ambient 0.015%/°C Max capacitance Load 220µF Switching Frequency 280 Quiescent Current 330 Vin = min. to max. at 0% load Operating Temperature Range 380kHz 5 7mA -40°C +85°C Operating Case Temperature +100°C Storage Temperature Range -55°C +125°C Case Thermal Impendance 70°C / W Thermal Shutdown Internal IC junction +160°C Package Weiught MTBF (+25°C) . (+71°C) } ±100mV 30mVp-p 40mVp-p 20mVp-p 35mVp-p 1.9g Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F 21098 x 10³ hours using MIL-HDBK 217F 4212 x 10³ hours Standard Application Circuit +Vin R-78xx-0.5 +Vout Add a blocking diode to Vout if current can flow backwards into the output, as this can damage the converter. C1 10µF (Vin>28V) -Vin -Vout Input capacitor needed only if Vin>28VDC. 140 27-March-2007 www.recom-international.com INNOLINE R-78xx-0.5 Series DC/DC-Converter Characteristics Ripple Efficiency 100 Vo=12V,15 V Vo=9V Vo=5V Vo=3.3V Vo=1.8V Vo=1.5V 50 50 Vo=12V Vo=15V Vo=9V Vo=5V Vo=3.3V Ripple (mV) Efficiency (%) 25 10 Vin (V) 20 Vo=1.8V Vo=1.5V 30 34 10 Vin (V) Efficiency Vs Vin (Full Load) 30 34 20 Ripple Vs Vin (full load) 100 50 Vo=15V Vo=12V Vo=5V Vo=3.3V Vo=1.8V Vo=1.5V 50 Vo=12V Vo=15V Vo=9V Vo=5V Vo=3.3V Vo=1.8V Vo=1.5V Efficiency (%) Ripple (mV) 25 0.1 0.2 0.3 0.4 0.5 0.6 0.1 Output Current ( A ) 0.2 0.3 0.4 0.5 0.6 Output Current ( A ) Efficiency Vs Load ( Vin=Max ) Ripple Vs Load ( Vin=24V ) 100 50 Vo=12V,15V Vo=5V Vo=3.3V Vo=1.8V Vo=1.5V 25 Vo=15V Vo=12V Vo=1.8V Vo=3.3, 9V Vo=5V Vo=1.5V Ripple (mV) Efficiency (%) 50 0.1 0.2 0.3 0.4 0.5 0.1 0.6 0.3 0.4 0.5 0.6 Ripple Vs Load ( Vin=Min ) Efficiency Vs Load ( Vin=Min ) www.recom-international.com 0.2 Output Current ( A ) Output Current ( A ) 27-March-2007 141 R-78xx-0.5 Series INNOLINE DC/DC-Converter Application Examples High efficiency, isolated, dual unregulated outputs DC/DC Converter ( 1:1 ) +Vout R-78xx-0.5 +Vin Com C1 -Vout C2 - Isolated dual outputs -Vin - Wide input range 4.75V to 34V C1 : optional, C2: Required (further decoupling filtering may be necessary between the two converters) Isolated (up to 6KV), wide Input range regulated output DC/DC Converter ( 1:1 ) +Vin R-78xx-0.5 +Vout C1 -Vin C2 - High isolation voltage - Improved loading / line regulation - Wide Input Voltage Range - Point-of-Load Architecture -Vout C1: Required (further decoupling filtering may be necessary between the two converters), C2: Optional Package Style and Pinning (mm) SIP3 PIN Package 3rd angle projection 7.55 10.2 RECOM R-785.0-0.5 **** Pb RECOM R-785.0-0.5 0.51 typ. **** Pb 1 2 3 0.7 typ. 4.10 Recommended Footprint Details 1.00 ø+0.15/0 11.50 0.25 Bottom View 3.21 142 5.08 2.54 2.0 Top View 2.54 27-March-2007 Pin Connections Pin # 1 +Vin 2 GND 3 +Vout xx.x ±0.5mm xx.xx ±0.25mm www.recom-international.com