Features Regulated Converters ● ● ● ● ● ● ● ● 4:1 Wide Input Voltage Range 12 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Five-Sided Shield No Derating to 61°C Standard DIP24 Pinning Efficiency to 88% Selection Guide 24V and 48V Wide Input Types DIP24 (SMD) Input Range VDC Output Voltage VDC Output Current mA Input (4,5) Current mA RP12-243.3SAW** 9-36 3.3 3500 55/602 84 2000 RP12-2405SAW** 9-36 5.1 2400 55/614 87 2000 RP12-2412SAW** 9-36 12 1000 25/610 86 430 RP12-2415SAW** 9-36 15 800 25/610 86 300 RP12-483.3SAW** 18-75 3.3 3500 20/301 84 2000 RP12-4805SAW** 18-75 5.1 2400 20/307 87 2000 RP12-4812SAW** 18-75 12 1000 13/302 87 430 RP12-4815SAW** 18-75 15 800 13/298 88 300 RP12-2405DAW** 9-36 ±5 ±1200 20/625 84 ±1250 RP12-2412DAW** 9-36 ±12 ±500 25/610 86 ±200 RP12-2415DAW** 9-36 ±15 ±400 25/610 86 ±120 RP12-4805DAW** 18-75 ±5 ±1200 10/309 85 ±1250 RP12-4812DAW** 18-75 ±12 ±500 13/301 87 ±200 RP12-4815DAW** 18-75 ±15 ±400 13/301 87 ±120 Part Number Efficiency(6)Capacitive(7) Load max. % µF POWERLINE DC/DC-Converter RP12S_DAW Series 12 Watt DIP24 & SMD, Single & Dual Output UL-60950-1 Certified ** add Suffix SMD for SMD package Derating Graph (Ambient Temperature) RP12-4805SAW 125 100 Output Power (%) 75 50 75Vin Natural Convection Nom Vin 25 0 -40 -25 -10 0 50 60 70 80 90 100 110 Ambient Temperature Range (°C) 65 Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 24V nominal input 48V nominal input Input Filter Input Surge Voltage (100 ms max.) 9-36VDC 18-75VDC Pi Type 24V Input 48V Input Input Reflected Ripple (nominal Vin and full load) 50VDC 100VDC 20mAp-p continued on next page www.recom-international.com 14-February-2007 233 POWERLINE RP12-S_DAW Series DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see note 1) 450ms typ. Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA DC-DC ON DC-DC OFF Nominal input Remote OFF input current Output Power 12W max. Output Voltage Accuracy (full Load and nominal Vin) ±1.2% Minimum Load 0% Line Regulation (low line, high line at full load) Load Regulation (0% to 100% full load) ±0.2% ±0.5% ±1% Single Dual Cross Regulation Dual Output (asymmetrical load 25%/100% full load) ±5% Ripple and Noise (20MHz bandwith) 85mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) Input Voltage Variation, dv/dt 250µs complies with ETS300 132, part 4.4 Over Load Protection (% of full load at nominal Vin) Overvoltage Protection (Single) Undervoltage Protection 150% typ 24V Input 48V Input Short Circuit Protection Zener Diode Clamp DC-DC ON = 9VDC, DC-DC OFF = 8VDC DC-DC ON = 18VDC, DC-DC OFF = 16VDC Continuous, automatic recovery Efficiency Isolation Voltage 5V/ms see „Selection Guide“ table In to Out and I/O to case 1600VDC min. Isolation Resistance 10 GΩ min. Isolation Capacitance 1500pF max. Operating Frequency Operating Temperature Range 5.1, 12, 15, ±12, ±15V 3.3, ±5V with derating 400kHz typ. -40°C to +65°C -40°C to +61°C -40°C to +105°C Maximum Case Temperature +105°C Storage Temperature Range -55°C to +125°C Thermal Impedance Natural convection 20°C/Watt Case Material Nickel plated copper Base Material Non-conductive black plastic Potting Material Weight Conducted Emissions (see note 3) Radiated Emissions (see note 3) ESD Radiated Immunity Fast Transient Surge Conducted Immunity DIP SMD EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity MTBF (see note 2) 234 Epoxy (UL94-V0) 18g 20g Class A Class A Perf. Critera B Perf. Critera A Perf. Critera B Perf. Critera B Perf. Critera A 5% to 95% RH Bellcore-TR-NWT-000332 14-February-2007 2350 x 103 hours www.recom-international.com POWERLINE RP12-S_DAW Series DC/DC-Converter Notes : 1. 2. 3. 4. 5. 6. 7. The ON/OFF control pin voltage is referenced to negative input. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). Requires external filter to meet EN55022 Class A Typical value at nominal input voltage and no load. Maximum value at nominal input voltage and full load Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. Package Style and Pinning (mm) DIP24 Package Style 3rd angle projection 31.80 20.30 10.20 3.8 2 5.10 20.30 2.54 Pin Connections 15.20 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin NC = No Connection 0.25 x 0.50 Rectangular Pin 9 1 2 3 11 Pin Pitch Tolerance ±0.35 mm Bottom View 16 23 22 Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin 14 SMD Package Style 32.00 20.30 SMD Package Style 31.40 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 11.20 2.54 10.90 3.81 21.30 6.35 Pin Connections 25.40 Pin area 0.1 x 0.50 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 Top View 24.14 24 23 22 21 20 16 15 14 13 11 x 2.54 www.recom-international.com 1 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin Pitch Tolerance ±0.35 mm 27.94 14-February-2007 235