Ordering number : ENN7509 30A01C PNP Epitaxial Planar Silicon Transistor 30A01C Low-Frequency General-Purpose Amplifier Applications Applications Package Dimensions Low-frequency power amplifier, muting circuit. unit : mm 2018B Features • • 0.4 0.5 • [30A01C] Large current capacity. Low collector-to-emitter saturation voltage (resistance). RCE(sat) typ=0.67Ω[IC=0.3A, IB=15mA]. Ultrasmall package facilitates miniaturization in end products. Small ON-resistance (Ron). 3 0.16 0 to 0.1 1.5 2.5 • 1 : Base 2 : Emitter 3 : Collector 0.8 1.1 1 0.95 0.95 2 1.9 2.9 0.5 • SANYO : CP Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO --30 V Collector-to-Emitter Voltage VCEO --30 V Emitter-to-Base Voltage VEBO --5 Collector Current IC Collector Current (Pulse) ICP PC Collector Dissipation Junction Temperature Tj Storage Temperature Tstg --300 Mounted on a glass epoxy board (20✕30✕1.6mm). V mA --600 mA 300 mW 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Conditions VCB=--30V, IE=0 VEB=--4V, IC=0 VCE=--2V, IC=--10mA Ratings min typ max 200 Unit --0.1 µA --0.1 µA 500 VCE=--10V, IC=--50mA VCB=--10V, f=1MHz 520 MHz IC=--100mA, IB=--5mA IC=--100mA, IB=--5mA --110 --220 mV --0.9 --1.2 V 3 Marking : XQ pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O3003 TS IM TA-100648 No.7509-1/4 30A01C Continued from preceding page. Parameter Symbol Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage V(BR)CBO V(BR)CEO IC=--10µA, IE=0 IC=--1mA, RBE=∞ Emitter-to-Base Breakdown Voltage V(BR)EBO IE=--10µA, IC=0 See specified Test Circuit. Turn-ON Time ton tstg tf Storage Time Fall Time Ratings Conditions min typ Unit max --30 V --30 V --5 V 39 ns See specified Test Circuit. 200 ns See specified Test Circuit. 48 ns Switching Time Test Circuit IB1 PW=20µs D.C.≤1% OUTPUT IB2 INPUT RB VR 50Ω RL + + 220µF 470µF VBE=5V VCC= --12V IC=20IB1= --20IB2= --100mA .8m --0.8mA --1 --0.6mA mA --140 --120 --100 --0.4mA --80 --0.2mA --60 --40 --300 --200 Ta= 75° C m --1.4 Collector Current, IC -- mA 1.2m A -- --1 --2.0 Collector Current, IC -- mA A --160 VCE= --2V A --1.0mA A .6m --180 IC -- VBE --400 25°C --25° C IC -- VCE --200 --100 --20 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 Collector-to-Emitter Voltage, VCE -- V 0 --2.0 VCE= --2V Ta=75°C 25°C --25°C 5 3 2 100 7 5 3 2 10 --1.0 2 3 5 7 --10 2 3 5 7 --100 Collector Current, IC -- mA 2 3 --0.2 5 7--1000 IT04098 --0.4 --0.6 --0.8 Base-to-Emitter Voltage, VBE -- V --1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 0 IT04096 hFE -- IC 1000 DC Current Gain, hFE --1.8 7 --1.0 IT04097 VCE(sat) -- IC IC / IB=20 5 3 2 --100 7 5 5°C Ta=7 C 25°C --25° 3 2 --10 --1.0 2 3 5 7 --10 2 3 5 7 --100 Collector Current, IC -- mA 2 3 5 7--1000 IT04099 No.7509-2/4 30A01C VBE(sat) -- IC 2 --1000 Ta= --25°C 7 25°C 75°C 5 3 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 3 2 100 7 100 7 5 f=1MHz 7 2 3 5 7 --10 2 3 5 3 2 5 7 --100 2 3 5 7--1000 IT04101 Ron -- IB 1kΩ f=1MHz OUT IN 1kΩ 3 ON Resistance, Ron -- Ω Output Capacitance, Cob -- pF 5 Collector Current, IC -- mA Cob -- VCB 10 VCE= --10V 7 5 --1.0 5 7--1000 IT04100 Collector Current, IC -- mA fT -- IC 1000 IC / IB=20 Gain-Bandwidth Product, f T -- MHz Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 3 2 IB 10 7 5 3 2 1.0 7 5 3 2 1.0 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 IT04102 Collector-to-Base Voltage, VCB -- V PC -- Ta Collector Dissipation, PC -- mW 350 300 0.1 --0.1 2 3 5 7 --1.0 2 Base Current, IB -- mA 3 5 7 --10 IT06066 M ou nt 250 ed on ag las 200 s-e po xy 150 bo ar d( 100 20 ✕ 30 ✕ 1. 6m m 50 ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT05521 No.7509-3/4 30A01C Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2003. Specifications and information herein are subject to change without notice. PS No.7509-4/4