SANYO SBT80-10J

SBT80-10J
Ordering number : ENN7790
SBT80-10J
Schottky Barrier Diode (Twin Type · Cathode Common)
100V, 8A Rectifier
Applications
•
High frequency rectification (switching regulators, converters, choppers).
Features
•
•
•
•
•
•
Tj=150°C.
Low forward voltage (VF max=0.80V).
Short reverse recovery time.
Low switching noise.
High reliability due to highly reliable planar structure.
Micaless package facilitating mounting.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Repetitive Peak Reverse Voltage
VRRM
100
V
Nonrepetitive Peak Reverse Surge Voltage
VRSM
IO
105
V
Average Output Current
Surge Forward Current
Junction Temperature
IFSM
Tj
Storage Temperature
Tstg
50Hz resistive load, Sine wave Tc=81°C
8
A
60
A
--55 to +150
°C
--55 to +150
°C
50Hz sine wave, 1 cycle
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Conditions
Reverse Voltage
VR
IR=1mA, Tj=25°C*
Forward Voltage
IF=3.0A, Tj=25°C*
Reverse Current
VF
IR
Interterminal Capacitance
C
Thermal Resistance
Rth(j-c)
Ratings
min
typ
max
100
VR=50V, Tj=25°C*
VR=10V, Tj=25°C*
Unit
V
0.80
V
0.1
mA
5.0
°C / W
90
Junction-Case : Smoothed DC
pF
Note) * : Value per element
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
21805SD TS IM TB-00001179 No.7790-1/3
SBT80-10J
Package Dimensions
Electrical Connection
unit : mm
1178A
Anode
Anode
4.5
2.8
Cathode
5.6
18.1
16.0
3.2
7.2
3.5
7.2
10.0
2.4
14.0
1.6
1.2
0.7
0.75
1 2
3
2.55
1 : Anode
2 : Cathode
3 : Anode
2.4
2.55
2.55
IF -- VF
5
3
2
Represented by max
7
5
0 °C
Tj=15
25°C
10
7
5
3
2
1.0
7
5
3
2
0.1
7
5
0°C
15
Tj=
3
2
150
max
yp
°C t
10
p
y
°C t
7
5
125
3
100
yp
°C t
2
1.0
7
5
3
2
3
0.01
1.0
1.5
2.0
Forward Voltage, VF -- V
Sine wave
(4)
12
(3)
(2)
(1)
180°
360°
10
Rectangular
wave
8
θ
6
360°
4
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
2
0
0
1
2
3
4
5
6
7
40
8
Average Forward Current, IO -- A
9
10
IT08513
60
80
100
Reverse Voltage, VR -- V
IT08511
PF(AV) -- IO
14
20
0
2.5
Average Reverse Power Dissipation, PR(AV) -- W
0.5
0
Average Forward Power Dissipation, PF(AV) -- W
IR -- VR
100
Reverse Current, IR -- mA
Forward Current, IF -- A
SANYO : TO-220ML
2.55
120
IT08512
PR(AV) -- VRM
7.0
(1)Rectangular wave θ=300°
(2)Rectangular wave θ=240°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
6.5
6.0
5.5
5.0
PR max at Tj=150°C
(1)
(2)
Rectangular
wave
4.5
4.0
VR
360°
3.0
2.5
(3)
θ
3.5
Sine wave
2.0
(4)
VR
1.5
180°
360°
1.0
0.5
0
0
20
40
60
80
Peak Reverse Voltage, VRM -- V
100
120
IT08514
No.7790-2/3
SBT80-10J
Tc -- IO
170
Rectangular
wave
100
θ
Interterminal Capacitance, C -- pF
130
f=100kHz
360°
90
Sine
wave
70
50
0
(1)
360°
180°
1
2
(2)
(4)
5
6
7
8
9
100
7
5
3
70
IS
60
20ms
t
50
40
30
20
10
0
3
5
7 0.1
2
Time, t -- s
3
5
7 1.0
5
2
3
ID01025
7 1.0
2
3
5
7 10
2
3
5
7 100
2
ID01024
Reverse Voltage, VR -- V
IT08515
Current waveform 50Hz sine wave
2
2
10
IFSM -- t
80
7 0.01
3
2
4
3
Average Output Current, IO -- A
Surge Forward Current, IFSM(Peak) -- A
(3)
Transient Thermal Resistance, Rth(j-c) -- °C / W
Case Temperature, Tc -- °C
150
C -- VR
5
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
10
Rth(j-c) -- t
7
5
3
2
1.0
7
5
3
0.001 2 3 5 7 0.01 2 3
5 7 0.1
2 3
5 7 1.0
2 3
Time, t -- s
5 7 10 2
ID01026
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 2005. Specifications and information herein are subject
to change without notice.
PS No.7790-3/3