Ordering number : ENN7618 SVC276 Diffused Junction Type Silicon Diode SVC276 FM Receiver Electronic Tuning Applications • • Twin type with a good linearity of C-V characteristic. Excels in large input characteristic. Small package permits SVC276-applied sets to be compact and slim. High capacitance ratio (VR=2.0 to 8.0V). High Quality Factor. unit : mm 1326 [SVC276] 0.3 0.15 3 2.1 • Package Dimensions 0.25 • 1.6 Features 3 2 1 0.65 0.07 0.25 Electrical Connection 2.0 3 (Bottom view) 1 : Anode 2 : Anodet 3 : Cathode 0.85 1 : Anode 2 : Anode 3 : Cathode (Top view) 1 1 2 2 SANYO : MCPH3 (Top view) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Reverse Voltage VR 16 V Junction Temperature Tj 125 °C Storage Temperature Tstg --55 to +125 °C Electrical Characteristics at Ta=25°C Parameter Symbol Breakdown Voltage V(BR)R Reverse Voltage IR C2.0V Interterminal Capacitance* C6.0V C8.0V Quality Factor Q Capacitance Ratio CR Conditions IR=10µA VR=10V Ratings min typ max 14 Unit V 50 nA VR=2.0V, f=1MHz VR=6.0V, f=1MHz 73.72 79.77 pF 25.50 33.61 pF VR=8.0V, f=1MHz VR=2.0V, f=100MHz 18.04 23.78 pF C2.0V / C8.0V 100 3.1 Note)* : Capacitance value per each diode. Marking : V3 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 90503 TS IM TA-100655 No.7618-1/3 SVC276 C, Q -- VR 1000 1000 VRF=20mVrms 7 7 5 5 z) H 00M Interterminal Capacitance, C -- pF 3 3 2 2 100 100 7 7 5 5 C(f =1M 3 Hz) Quality factor, Q =1 Q(f 3 2 2 10 10 0 1 2 3 4 5 6 7 8 9 Reverse Voltage, VR -- V 10 IT06455 C -- Ta 1.03 f=1MHz VRF=20mVrms 2V 4V 6V 8V 1.02 Capacitance Ratio 1.01 1.00 0.99 0.98 0.97 --75 8V 6V 4V 2V --50 --25 0 25 50 Ambient Temperature, Ta -- °C 75 100 125 150 IT06456 No.7618-2/3 SVC276 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2003. Specifications and information herein are subject to change without notice. PS No.7618-3/3