VEC2307 Ordering number : ENA0113 VEC2307 P-Channel Silicon MOSFET General-Purpose Switching Device Applications Features • • • • The best suited for load switches. 4V drive. Composite type, facilitaing high-density mounting. Mount height 0.75mm. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS --30 Gate-to-Source Voltage VGSS ±20 V --2 A Drain Current (DC) ID Drain Current (Pulse) IDP PD PW≤10µs, duty cycle≤1% PT Tch Mounted on a ceramic board (900mm2✕0.8mm) Channel Temperature Storage Temperature Tstg Allowable Power Dissipation Total Dissipation Mounted on a ceramic board (900mm2✕0.8mm)1unit V --8 A 0.9 W 1.0 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Ratings min typ Unit max ID=--1mA, VGS=0V VDS=--30V, VGS=0V VGS=±16V, VDS=0V --30 IDSS IGSS VGS(off) yfs VDS=--10V, ID=--1mA VDS=--10V, ID=--1A --1.2 RDS(on)1 RDS(on)2 ID=--1A, VGS=--10V ID=--0.5A, VGS=--4V 130 170 mΩ 225 320 mΩ Input Capacitance Ciss 200 pF Output Capacitance Coss VDS=--10V, f=1MHz VDS=--10V, f=1MHz 47 pF Reverse Transfer Capacitance Crss VDS=--10V, f=1MHz 32 pF Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS Conditions 1.2 Marking : CH V --1 µA ±10 µA --2.6 2.0 V S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1505PE MS IM TB-00001874 No. A0113-1/4 VEC2307 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Turn-ON Delay Time td(on) See specified Test Circuit. 7.2 ns Rise Time tr td(off) See specified Test Circuit. 2.9 ns See specified Test Circuit. 21 ns tf See specified Test Circuit. 8.7 ns Turn-OFF Delay Time Fall Time Total Gate Charge Qg VDS=--10V, VGS=--10V, ID=--2A 5.5 nC Gate-to-Source Charge Qgs VDS=--10V, VGS=--10V, ID=--2A 0.98 nC Gate-to-Drain “Miller” Charge Qgd VDS=--10V, VGS=--10V, ID=--2A 0.82 Diode Forward Voltage VSD IS=--2A, VGS=0V Package Dimensions unit : mm 7012-002 --0.85 7 6 5 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 0.15 6 5 2.3 0.25 2.8 0.25 8 7 1 2 3 V Electrical Connection 0.3 8 nC --1.5 4 0.65 2.9 0.75 1 2 3 4 Top view 0.07 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 SANYO : VEC8 Switching Time Test Circuit VDD= --15V VIN 0V --10V ID= --1A RL=15Ω VOUT VIN D PW=10µs D.C.≤1% G VEC2307 P.G 50Ω S No. A0113-2/4 VEC2307 ID -- VDS VDS= --10V V .0 --4 VGS= --3.0V --1.0 --2 --1 25 °C --0.5 --3 Ta= 75° C --25 °C --1.5 ID -- VGS --4 Drain Current, ID -- A --8. 0V --6. 0 Drain Current, ID -- A V --10 . --5. 0V --4 .5V 0V --2.0 0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 Drain-to-Source Voltage, VDS -- V --1.0 0 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 Gate-to-Source Voltage, VGS -- V RDS(on) -- VGS 500 --0.5 IT10320 --4.5 IT10321 RDS(on) -- Ta 500 400 --1.0A 300 250 200 150 100 50 --4 --6 --8 --10 Gate-to-Source Voltage, VGS -- V C 5° 7 5 --2 °C 75 °C 25 2 50 --40 --20 0 20 40 60 80 100 120 140 160 IT10323 IS -- VSD VGS=0V --1.0 7 5 3 2 --0.1 7 5 3 2 3 2 0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Drain Current, ID -- A 3 5 --0.001 --0.2 --0.4 --0.6 --0.8 --1.0 Diode Forward Voltage, VSD -- V IT10324 SW Time -- ID 2 --1.2 IT10325 Ciss, Coss, Crss -- VDS 3 f=1MHz VDD= --15V VGS= --10V Ciss 2 7 5 3 td(off) 2 10 7 Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 100 --0.01 7 5 3 100 --10V 3 2 Source Current, IS -- A Forward Transfer Admittance, yfs -- S 2 = Ta , V GS= .0A I D= --1 150 5 3 1.0 200 Ambient Temperature, Ta -- °C VDS= --10V 5 250 IT10322 yfs -- ID 7 V --4 S= A, VG --0.5 = ID 5°C --2 350 300 0 --60 0 0 400 Ta= 7 ID= --0.5A 350 450 25° C --25° C 450 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Ta=25°C tf td(on) 5 tr 3 100 7 5 Coss Crss 3 2 2 1.0 --0.1 10 2 3 5 7 --1.0 Drain Current, ID -- A 2 3 5 IT03229 0 --5 --10 --15 --20 --25 Drain-to-Source Voltage, VDS -- V --30 IT03230 No. A0113-3/4 VEC2307 VGS -- Qg --10 VDS= --10V ID= --2A --8 --10 7 5 --7 3 2 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V --9 --6 --5 --4 --3 --1 3 2 1 2 3 4 5 Total Gate Charge, Qg -- nC IT03231 0µ s m s 10 DC 1m s 0m s op er ati on Operation in this area is limited by RDS(on). Ta=25°C Single pulse Mounted on a ceramic board (900mm2✕0.8mm) --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Drain-to-Source Voltage, VDS -- V 2 3 5 IT10326 PD -- Ta 1.2 Allowable Power Dissipation, PD -- W 6 10 10 ID= --2A 3 2 --2 0 ≤10µs IDP= --8A --1.0 7 5 --0.1 7 5 0 ASO 2 Mounted on a ceramic board (900mm2✕0.8mm) 1.0 0.9 0.8 To t al 0.6 1u di ss nit ip ati on 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT10327 Note on usage : Since the VEC2307 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice. PS No. A0113-4/4