Sharma Tantalum Capacitors RoHS Compliant SAH SERIES INTRODUCTION SAH Series molded tantalum chip capacitors are specially developed for High Heat Resistance and High Reliability. Ideal for automotive electronics applications. FEATURES: • HIGH HEAT RESISTANCE MAKES IT SUITABLE FOR ALL TYPES OF SOLDERING RESISTANCE TO HEAT - 125°C WITH DERATED VOLTAGE FOR 2000 HRS. 150°C STEADY STATE • HIGH FOR 1000 HRS. RESISTANCE TO MOISTURE. 85°C & 85% RH FOR 500 HRS. 65°C 95% RH WITH RATED • HIGH VOLTAGE FOR 500 HRS. • HIGHEST RELIABILITY DUE TO EXCEPTIONALLY LOW FAILURE RATE OF 0.5% PER 1000 HRS. . REEL PACKING STDS • COMPONENTS MEET EPOXY MOLDED COMPONENTS WITH CONSISTENT DIMENSIONS AND SURFACE FINISH. • ENGINEERED FOR AUTOMATIC ONSERTION. • COMPATIBLE WITH ALL POPULAR HIGH SPEED ASSEMBLY MACHINES. EIAJ RC-3813 & JIS C 5102 EIAJ RC-1009B /EIA 481/IEC 286-3. GENERAL SPECIFICATIONS CAPACITANCE RANGE: 1.0 µF to 68 µF. VOLTAGE RANGE: 4VDC to 50VDC. CAPACITANCE TOLERANCE: ±20%(M), ±10%(K), (±5%(J) - UPON REQUEST). TEMPERATURE RANGE -55 TO +125°C WITH DERATING ABOVE 85°C. ENVIRONMENTAL CLASSIFICATION: 55/125/56(IEC68-2). DISSIPATION FACTOR: 0.1µF TO 1µF 4 % MAX,1.5µF TO 68 µF 6% MAX. LEAKAGE CURRENT: NOT MORE THAN 0.005CV µA or 0.25 µA WHICHEVER IS GREATER. FAILURE RATE: 0.5%PER 1000 HRS. LIFE TEST DETAILS CAPACITORS SHALL WITHSTAND RATED DC VOLTAGE APPLIED AT 85°C for 2000 Hrs. or DERATED DC VOLTAGE APPLIED at 125°C for 1000 Hrs. AFTER THE TEST: 1. CAPACITANCE CHANGE SHALL NOT EXCEED ±10%OF INITIAL VALUE. 2. DISSIPATION FACTOR SHALL BE WITHIN THE NORMAL SPECIFIED LIMITS. 3. DC LEAKAGE CURRENT SHALL BE WITHIN 125% OF NORMAL LIMIT. 4. NO REMARKABLE CHANGE IN APPEARANCE. MARKINGS TO REMAIN LEGIBLE. CASE DIMENSIONS IN MILLIMETERS (INCHES) CASE EIA/IEC L W H l a B 3528 3.5 ±0.2 2.8 ±0.2 1.9 ±0.2 0.8 ±0.3 2.2 ±0.1 (0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008) (0.031 ±0.012) (0.087 ±0.004) C 6032 6.0 ±0.3 3.2 ±0.3 2.5 ±0.3 1.3 ±0.3 2.2 ±0.1 D2 6045 (0.236 ±0.012) 5.8 ±0.3 (0.126 ±0.012) 4.5 ±0.3 (0.098 ±0.012) 3.1 ±0.3 (0.051 ±0.012) 1.3 ±0.3 (0.087±0.004) 3.1 ±0.1 (0.228 ±0.012) (0.177 ±0.012) (0.122 ±0.012) (0.051 ±0.012) (0.122 ±0.004) D 7343 7.3 ±0.3 4.3 ±0.3 2.8 ±0.3 1.3 ±0.3 2.4 ±0.1 (0.287 ±0.012) (0.170 ±0.012) (0.110 ±0.012) (0.051 ±0.012) (0.095 ±0.004) SAH SERIES RATINGS AND CASE CODES CAPACITANCE HIGH RELIABILITY SERIES Tel:(949)642-SECI 4V 6.3V RATED VOLTAGE DC at 85 °C 10V 16V 20V 25V CODE µF 35V 50V 104 0.1 A A 154 0.15 A B 224 0.22 A B 334 0.33 A B 474 0.47 B C 684 0.68 B C 105 1.0 155 1.5 225 2.2 335 3.3 475 4.7 685 6.8 106 10 156 15 226 22 336 33 476 47 686 68 A A A A B A B A B C C B C C C C C C D2, D C D2, D C B B B D2, D D2, D D2, D D2, D D2, D D2, D D2, D D2, D SECI Engineers & Buyers' Guide Fax:(949)642-7327 Sharma Tantalum Capacitors RoHS Compliant SAH SERIES SPECIFICATIONS 4 V DC Rated Voltage Surge Voltage 5 VDC @ 85°C and 3.2 VDC @ 125°C SHARMA PART NUMBER SAH SAH SAH SAH SAH A B C D2 D 335 106 336 686 686 M M M M M 04 04 04 04 04 R R R R R 202 202 202 501 501 CAP VALUE µF DCL (MAX) µA DF% (MAX) at+25°C ESR(max) OHMS at 100KHz 3.3 10 33 68 68 0.5 0.5 1.3 2.7 2.7 6 6 6 6 6 9.0 4.0 2.2 1.1 1.1 25 V DC Rated Voltage Surge Voltage 32 VDC @ 85°C and 20 VDC @ 125°C RIPPLE (max) Irms Amps at 100 KHz 0.088 0.141 0.224 0.363 0.369 SHARMA PART NUMBER SAH SAH SAH SAH SAH A B C D2 D 474 155 475 106 106 M M M M M 25 25 25 25 25 R R R R R 202 202 501 501 501 CAP VALUE µF DCL (MAX) µA DF% (MAX) at+25°C ESR(max) OHMS at 100KHz 0.47 1.5 4.7 10 10 0.5 0.5 1.2 2.5 2.5 4 6 6 6 6 14.0 5.5 2.4 1.2 1.2 RIPPLE (max) Irms Amps at 100 KHz 0.071 0.121 0.214 0.348 0.354 6.3 V DC Rated Voltage Surge Voltage 8 VDC @ 85°C and 5 VDC @ 125°C SHARMA PART NUMBER SAH SAH SAH SAH SAH A B C D2 D 225 685 226 476 476 M M M M M 06 06 06 06 06 R R R R R 202 202 501 501 501 CAP VALUE µF DCL (MAX) µA DF% (MAX) at+25°C ESR(max) OHMS at 100KHz 2.2 6.8 22 47 47 0.5 0.5 1.4 3.0 3.0 6 6 6 6 6 9.0 4.0 2.2 1.1 1.1 RIPPLE (max) Irms Amps at 100 KHz 0.088 0.141 0.224 0.363 0.369 10 V DC Rated Voltage Surge Voltage 13 VDC @ 85°C and 8 VDC @ 125°C SHARMA PART NUMBER SAH SAH SAH SAH SAH A B C D2 D 155 475 156 336 336 M M M M M 10 10 10 10 10 R R R R R 202 202 501 501 501 CAP VALUE µF DCL (MAX) µA DF% (MAX) at+25°C ESR(max) OHMS at 100KHz RIPPLE (max) Irms Amps at 100 KHz 1.5 4.7 15 33 33 0.5 0.5 1.5 3.3 3.3 6 6 6 6 6 10.0 4.0 2.2 1.1 1.1 0.084 0.141 0.224 0.363 0.369 35 V DC Rated Voltage Surge Voltage 45 VDC @ 85°C and 28 VDC @ 125°C SHARMA PART NUMBER SAH SAH SAH SAH SAH SAH SAH SAH SAH SAH SAH SAH SAH SAH A A A A B B B C C C D2 D D2 D 104 154 224 334 474 684 105 155 225 335 475 475 685 685 M M M M M M M M M M M M M M 35 35 35 35 35 35 35 35 35 35 35 35 35 35 R R R R R R R R R R R R R R 202 202 202 202 202 202 202 501 501 501 501 501 501 501 CAP VALUE µF DCL (MAX) µA DF% (MAX) at+25°C ESR(max) OHMS at 100KHz RIPPLE (max) Irms Amps at 100 KHz 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 4.7 6.8 6.8 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 1.2 1.6 1.6 2.4 2.4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 24.0 21.0 18.0 15.0 10.0 8.0 6.5 4.5 3.5 2.5 1.5 1.5 1.3 1.3 0.054 0.058 0.062 0.068 0.089 0.100 0.111 0.156 0.177 0.210 0.311 0.316 0.334 0.340 16 V DC Rated Voltage Surge Voltage 20 VDC @ 85°C and 13 VDC @ 125°C SHARMA PART NUMBER SAH SAH SAH SAH SAH A B C D2 D 105 335 106 226 226 M M M M M 16 16 16 16 16 R R R R R 202 202 501 501 501 CAP VALUE µF DCL (MAX) µA DF% (MAX) at+25°C ESR(max) OHMS at 100KHz RIPPLE (max) Irms Amps at 100 KHz 1 3.3 10 22 22 0.5 0.5 1.6 3.5 3.5 4 6 6 6 6 11.0 4.4 2.2 1.1 1.1 0.080 0.135 0.224 0.363 0.369 20 V DC Rated Voltage Surge Voltage 26 VDC @ 85°C and 16 VDC @ 125°C SHARMA PART NUMBER SAH SAH SAH SAH SAH A B C D2 D 684 225 685 156 156 M M M M M 20 20 20 20 20 R R R R R 202 202 501 501 501 CAP VALUE µF DCL (MAX) µA DF% (MAX) at+25°C ESR(max) OHMS at 100KHz RIPPLE (max) Irms Amps at 100 KHz 0.68 2.2 6.8 15 15 0.5 0.5 1.4 3.0 3.0 4 6 6 6 6 12.0 5.0 2.4 1.1 1.1 0.076 0.126 0.274 0.363 0.369 50 V DC Rated Voltage Surge Voltage 63 VDC @ 85°C and 40 VDC @ 125°C CAP VALUE µF DCL (MAX) µA DF% (MAX) at+25°C ESR(max) OHMS at 100KHz 202 202 202 202 501 501 501 501 501 501 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 1.5 2.2 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.1 4 4 4 4 4 4 4 6 6 6 22.0 17.0 14.0 12.0 8.0 7.5 5.5 4.0 3.5 2.5 0.056 0.069 0.076 0.082 0.117 0.121 0.141 0.132 0.141 0.249 225 M 50 R 501 2.2 1.1 6 2.5 0.241 SHARMA PART NUMBER SAH SAH SAH SAH SAH SAH SAH SAH SAH SAH A B B B C C C D2 D D2 SAH D 104 154 224 334 474 684 105 155 155 225 M M M M M M M M M M 50 50 50 50 50 50 50 50 50 50 R R R R R R R R R R RIPPLE (max) Irms Amps at 100 KHz NOTE: FOR 10% TOLERANCE CHANGE TOLERANCE CODE FROM M TO K. FOR 5% TOLERANCE CHANGE TOLERANCE CODE FROM M TO J. STANDARD REEL SIZE AND ORIENTATION = R. FOR OTHER SEE ORDERING INFORMATION ON PAGE 3. Tel:(949)642-SECI SECI Engineers & Buyers' Guide Fax:(949)642-7327