STMICROELECTRONICS 74V1T14STR

74V1T14
SINGLE SCHMITT INVERTER
■
■
■
■
■
■
■
■
HIGH SPEED: tPD = 5.0ns (TYP.) at VCC = 5V
LOW POWER DISSIPATION:
ICC = 1µA(MAX.) at TA=25°C
TYPICAL HYSTERESIS:
Vh=700mV at VCC=4.5V
POWER DOWN PROTECTION ON INPUT
SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 8mA (MIN) at VCC = 4.5V
BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
OPERATING VOLTAGE RANGE:
VCC(OPR) = 4.5V to 5.5V
IMPROVED LATCH-UP IMMUNITY
DESCRIPTION
The 74V1T14 is an advanced high-speed CMOS
SINGLE SCHMITT INVERTER fabricated with
sub-micron silicon gate and double-layer metal
wiring C2MOS technology.
The internal circuit is composed of 3 stages
including buffer output, which provide high noise
immunity and stable output.
Power down protection is provided on input and 0
to 7V can be accepted on input with no regard to
the supply voltage. This device can be used to
SOT23-5L
SOT323-5L
ORDER CODES
PACKAGE
T&R
SOT23-5L
SOT323-5L
74V1T14STR
74V1T14CTR
interface 5V to 3V. Pin configuration and function
are the same as those of the 74V1T04 but the
74V1T14 has hysteresis.
This together with its schmitt trigger function
allows it to be used on line receivers with slow
rise/fall input signals.
The input is equipped with protection circuits
against static discharge, giving it ESD immunity
and transient excess voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
April 2004
1/9
74V1T14
INPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN N°
SYMBOL
1
2
4
3
NC
1A
1Y
GND
VCC
5
NAME AND FUNCTION
Not Connected
Data Input
Data Output
Ground (0V)
Positive Supply Voltage
TRUTH TABLE
A
Y
L
H
H
L
ABSOLUTE MAXIMUM RATINGS
Symbol
VCC
Parameter
Supply Voltage
VI
DC Input Voltage
VO
DC Output Voltage
IIK
DC Input Diode Current
IOK
IO
Unit
V
-0.5 to +7.0
V
-0.5 to VCC + 0.5
- 20
mA
DC Output Diode Current
± 20
mA
DC Output Current
± 25
mA
ICC or IGND DC VCC or Ground Current
Storage Temperature
Tstg
TL
Value
-0.5 to +7.0
Lead Temperature (10 sec)
V
± 50
mA
-65 to +150
°C
260
°C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
2/9
Parameter
Supply Voltage
Value
Unit
4.5 to 5.5
V
VI
Input Voltage
0 to 5.5
V
VO
Output Voltage
0 to VCC
V
Top
Operating Temperature
-55 to 125
°C
74V1T14
DC SPECIFICATIONS
Test Condition
Symbol
Parameter
Value
TA = 25°C
VCC
(V)
Min.
Vt+
High Level
Threshold Voltage
Vt-
Low Level
Threshold Voltage
Vh
Hysteresis Voltage
VOH
High Level Output
Voltage
4.5
IO=-50 µA
0.9
1.1
0.5
0.6
0.4
0.5
4.4
4.5
IO=-8 mA
3.94
Low Level Output
Voltage
4.5
IO=50 µA
4.5
IO=8 mA
Input Leakage
Current
Quiescent Supply
Current
Additional Worst
Case Supply
Current
0 to
5.5
VI = 5.5V or GND
5.5
5.5
VOL
II
ICC
+ICC
4.5
5.5
4.5
5.5
4.5
5.5
Typ.
-40 to 85°C
-55 to 125°C
Max.
Min.
Max.
Min.
Max.
2.0
2.0
1.5
1.6
1.4
1.6
0.9
1.1
0.5
0.6
0.4
0.5
4.4
2.0
2.0
1.5
1.6
1.4
1.6
0.9
1.1
0.5
0.6
0.4
0.5
4.4
2.0
2.0
1.5
1.6
1.4
1.6
4.5
3.8
0.0
Unit
V
V
V
V
3.7
0.1
0.1
0.1
0.36
0.44
0.55
V
± 0.1
± 1.0
± 1.0
µA
VI = VCC or GND
1
10
20
µA
One Input at 3.4V,
other input at VCC
or GND
1.35
1.5
1.5
mA
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3ns)
Test Condition
Symbol
tPLH
tPHL
Parameter
Propagation Delay
Time
VCC
(V)
CL
(pF)
5.0 (*)
5.0 (*)
15
50
Value
TA = 25°C
Min.
-40 to 85°C
-55 to 125°C
Typ.
Max.
Min.
Max.
Min.
Max.
5.0
6.5
7.5
8.5
1.0
1.0
9.0
10.0
1.0
1.0
10.5
11.5
Unit
ns
(*) Voltage range is 5.0V ± 0.5V
CAPACITIVE CHARACTERISTICS
Test Condition
Symbol
Parameter
Value
TA = 25°C
Min.
Typ.
Max.
10
CIN
Input Capacitance
4
CPD
Power Dissipation
Capacitance
(note 1)
14
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
10
Unit
Max.
10
pF
pF
1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC
3/9
74V1T14
TEST CIRCUIT
CL = 15/50pF or equivalent (includes jig and probe capacitance)
RT = ZOUT of pulse generator (typically 50Ω)
WAVEFORM: PROPAGATION DELAY (f=1MHz; 50% duty cycle)
4/9
74V1T14
SOT23-5L MECHANICAL DATA
mm.
mils
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
0.90
1.45
35.4
57.1
A1
0.00
0.10
0.0
3.9
A2
0.90
1.30
35.4
51.2
b
0.35
0.50
13.7
19.7
C
0.09
0.20
3.5
7.8
D
2.80
3.00
110.2
118.1
E
1.50
1.75
59.0
68.8
e
0.95
37.4
H
2.60
3.00
102.3
118.1
L
0.10
0.60
3.9
23.6
.
7049676C
5/9
74V1T14
SOT323-5L MECHANICAL DATA
mm.
mils
DIM.
MIN.
MAX.
MIN.
TYP.
MAX.
A
0.80
1.10
31.5
43.3
A1
0.00
0.10
0.0
3.9
A2
0.80
1.00
31.5
39.4
b
0.15
0.30
5.9
11.8
C
0.10
0.18
3.9
7.1
D
1.80
2.20
70.9
86.6
E
1.80
2.40
70.9
94.5
E1
1.15
1.35
45.3
53.1
e
0 .65
25.6
e1
1.3
51.2
L
6/9
TYP
0.10
0.30
3.9
11.8
74V1T14
Tape & Reel SOT23-xL MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MAX.
MIN.
TYP.
180
13.0
7.086
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
MAX.
0.504
0.512
14.4
0.519
0.567
Ao
3.13
3.23
3.33
0.123
0.127
0.131
Bo
3.07
3.17
3.27
0.120
0.124
0.128
Ko
1.27
1.37
1.47
0.050
0.054
0.0.58
Po
3.9
4.0
4.1
0.153
0.157
0.161
P
3.9
4.0
4.1
0.153
0.157
0.161
7/9
74V1T14
Tape & Reel SOT323-xL MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
175
180
185
6.889
7.086
7.283
C
12.8
13
13.2
0.504
0.512
0.519
D
20.2
N
59.5
0.795
60
T
8/9
60.5
2.362
14.4
0.567
Ao
2.25
0.088
Bo
2.7
0.106
Ko
1.2
0.047
Po
3.9
4
4.1
0.153
0.157
0.161
P
3.8
4
4.2
0.149
0.157
0.165
74V1T14
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2004 STMicroelectronics - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
http://www.st.com
9/9