Rotary Switches 10 x 10 mm Sealed Rotary DIP Switches (THR) RD82T Series RD82THR RD82TSO RD82TA2O ACCESSORIES ROTOR TYPE S1 S2 S3 AK - 83 H: Grey 2 3 4 5 1 TYPE OF TERMINALS: THT Top Adjust Type A1 THT Right Angle Side Adjust Type with Rows Spacing 2.54 mm A2 THT Right Angle Side Adjust Type with Rows Spacing 5.08 mm S SMT Top Type 2 TYPE OF CASE: Octagon Type Round Type O R 3 S1 S2 S3 A: Black 6 RD82T H C: Red General Specifications: How to order: 1 (applicable to only “S3“ actuators) ROTOR TYPE (See Above Drawings): Arrow Type Shaft Type Cross Type [email protected] FEATURES 4 04 06 08 10 16 5 R S G NR NS ND NE NO. OF POSITIONS: 4 Positions 6 Positions 8 Positions 10 Positions 16 Positions CODE (See Page 2): Real Code Complementary Code Gray Code Special Code 1 Special Code 2 Special Code 3 Special Code 4 » Sealing: IP 67(Dust & Waterproof ) » THR (Thru Hole Reflow solderable) » 3 x 3 Terminal MECHANICAL » Life Cycle: 10.000 steps » Operating Force: 700 gf max. ELECTRICAL » Contact Rating: 150mA, 24V DC (Switching) 400mA, 24V DC (None-Switching) » Contact Resistance: 80mΩ Max » Insulation Resistance: 100MΩ Min SOLDERING CONDITIONS Solder reflow max: 10s./260°C Solder iron max: 2s./340°C Solder bath max: 5s/280°C 6 PACKAGING TYPE: TB Tube TR Tape & Reel (SMT Only) www.greatecs.com 1 Rotary Switches 10 x 10 mm Sealed Rotary DIP Switches (THR) RD82T Series CODE Real Code Comlementary Code Gray Code Special Code ND NR NS NE [email protected] www.greatecs.com 2