EGP10A - EGP10K 1.0 Ampere Glass Passivated High Efficiency Rectifiers Features • Superfast recovery time for high efficiency • Low forward voltage, high current capability • Low leakage current • High surge current capability DO-41 Glass case COLOR BAND DENOTES CATHODE Absolute Maximum Ratings* Symbol Ta = 25°C unless otherwise noted Value Units IO Average Rectified Current .375 " lead length @ TL = 75°C 1.0 A if(surge) Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) 30 A Derate above 25°C 2.5 17 W mW°C IC Thermal Resistance, Junction to Ambient 50 °C/W TJ, TSTG Junction and Storage Temperature Range -65 ~ 150 °C PD Parameter Total Device Dissipation * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics* Ta = 25°C unless otherwise noted Device Parameter 10A 10B 10C 10D 10F 10G 10J 10K Units Peak Repetitive Reverse Voltage 50 100 150 200 300 400 600 800 V Maximum RMS Voltage 35 70 105 140 210 280 420 560 V DC Reverse Voltage (Rated VR) 50 100 150 200 300 400 600 800 V Maximum Reverse Current @ rated VR TA = 25°C TA = 125°C Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Maximum Forward Voltage @ 1.0 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz μA μA 5.0 100 50 0.95 1.25 22 15 75 nS 1.7 V pF * Pulse Test: Pulse Width≤300μs, Duty Cycle≤2% ©2007 Fairchild Semiconductor Corporation EGP10A - EGP10K Rev. A 1 www.fairchildsemi.com EGP10A - EGP10K 1.0 Ampere Glass Passivated High Efficiency Rectifiers July 2007 EGP10A - EGP10K 1.0 Ampere Glass Passivated High Efficiency Rectifiers Typical Performance Characteristics 2 EGP10A - EGP10K Rev. A www.fairchildsemi.com EGP10A - EGP10K 1.0 Ampere Glass Passivated High Efficiency Rectifiers Reverse Recovery Time Characterstic and Test Circuit Diagram 3 EGP10A - EGP10K Rev. A www.fairchildsemi.com TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM ® PDP-SPM™ Power220® SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I30