BUL804 High voltage fast-switching NPN Power Transistor General features ■ NPN Transistor ■ High voltage capability ■ Low spread of dynamic parameters ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed ■ In compliance with the 2002/93/EC European Directive 1 2 3 TO-220 Description The device is manufactured using high voltage Multi-Epitaxial Planar technology for high switching speeds and medium voltage capability. It uses a Cellular Emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. Internal schematic diagram The device is designed for use as PFC in high frequency ballast half Bridge voltage fed topology. Applications ■ Electronic ballast for fluorescent lighting ■ Dedicated for PFC solution in half-bridge voltage fed topology. Order codes Part Number Marking Package Packing BUL804 BUL804 TO-220 Tube May 2006 Rev 2 1/10 www.st.com 10 BUL804 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2/10 BUL804 1 Electrical ratings Electrical ratings Table 1. Absolute maximum rating Symbol Parameter Value Unit VCES Collector-emitter voltage (V BE = 0) 800 V VCEO Collector-emitter voltage (IB = 0) 450 V VEBO Emitter-base voltage (IC = 0) 8 V Collector current 4 A Collector peak current (tP < 5ms) 8 A Base current 2 A IBM Base peak current (tP < 5ms) 4 A Ptot Total dissipation at T c = 25°C 70 W Tstg Storage temperature -65 to 150 °C 150 °C Value Unit 1.78 62.5 °C/W °C/W IC ICM IB TJ Table 2. Symbol Rthj-case Rthj-amb Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case Thermal resistance junction-amb __max __max 3/10 Electrical characteristics 2 BUL804 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Symbol Electrical characteristics Parameter Test Conditions Collector cut-off current (VBE =-1.5V) ICEO Collector cut-off current (IB =0) VCE =450V VEBO Emitter-base voltage (IC = 0) IE =10mA Tj =125°C VCE =800V IC =100mA L =25mH Max. Unit 100 500 µA µA 250 µA 8 V 450 V VCE(sat) (1) Collector-emitter saturation voltage IC =1A IB =0.2A IC =2.5A IB =0.5A VBE(sat) (1) Base-emitter saturation voltage IC =1A IB =0.2A IC =2.5A IB =0.5A IC =10mA V CE =5V 10 IC =2A V CE =5V 10 20 1.8 2.6 µs 0.1 0.25 µs hFE ts tf ts tf DC current gain Resistive load Storage time Fall time Inductive load Storage time Fall time VCC =300V tp = 30µs 0.8 1.2 V V 1.2 1.3 V V IC =2A IB1 = -IB2 =0.4A (see fig.8 ) IC =2A IB1 =0.4A VBE(off) =-5V R BB =0Ω 0.6 1 µs Vclamp=360V (see fig.9) 0.1 0.2 µs Note (1) Pulsed duration = 300µs, duty cycle ≤1.5% 4/10 Typ. VCE =800V ICES Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) Min. BUL804 2.1 Electrical characteristics Electrical characteristics (curves) Figure 1. DC current gain Figure 2. DC current gain Figure 3. Collector-emitter saturation voltage Figure 4. Base-emitter saturation voltage Figure 5. Inductive load switching time Figure 6. Resistive load switching time 5/10 Electrical characteristics Figure 7. 2.2 Reverse biased safe operating area Test circuits Figure 8. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor Figure 9. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier 6/10 BUL804 BUL804 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 7/10 Package mechanical data BUL804 TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 8/10 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 BUL804 4 Revision history Revision history Table 4. Revision history Date Revision Changes 01-July-2005 1 Initial release. 17-May-2006 2 New template. 9/10 BUL804 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10