HCF4502B STROBED HEX INVERTER/BUFFER ■ ■ ■ ■ ■ ■ ■ ■ ■ 2 TTL-LOAD OUTPUT DRIVE CAPABILITY 3 STATE OUTPUTS COMMON OUTPUT DISABLE CONTROL INHIBIT CONTROL QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT II = 100nA (MAX) AT VDD = 18V TA = 25°C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B "STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES" DESCRIPTION HCF4502B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. It consists of six inverter/buffers with 3 state outputs. A logic "1" on the OUTPUT DISABLE input produces a High Impedance State in all six outputs. This feature permits common busing of DIP SOP ORDER CODES PACKAGE TUBE T&R DIP SOP HCF4502BEY HCF4502BM1 HCF4502M013TR the outputs, thus simplifying system design. A logic "1" on the INHIBIT input switches all six outputs to logic "0" if the OUTPUT DISABLE input is a logic "0". This device is capable of driving two standard TTL loads, which is equivalent to six times the JEDEC "B" series IOL standard . PIN CONNECTION September 2002 1/9 HCF4502B INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No 3, 6, 1, 10, 13, 15 5, 7, 2, 9, 11, 14 SYMBOL NAME AND FUNCTION D1 to D6 Data Inputs Q1 to Q6 Data Outputs 3-State Output Disable Input Inhibit Input 8 OUTPUT DISABLE INHIBIT VSS 16 VDD Positive Supply Voltage 4 12 Negative Supply Voltage TRUTH TABLE DISABLE INHIBIT Dn Qn L L L H L L H X L H X X H L L Z X : Don’t Care Z : High Impedance ABSOLUTE MAXIMUM RATINGS Symbol VDD Parameter Supply Voltage VI DC Input Voltage II DC Input Current PD Value Unit -0.5 to +22 V -0.5 to VDD + 0.5 ± 10 V mA 200 100 mW mW Top Power Dissipation per Package Power Dissipation per Output Transistor Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol VDD 2/9 Parameter Supply Voltage VI Input Voltage Top Operating Temperature Value Unit 3 to 20 V 0 to VDD V -55 to 125 °C HCF4502B DC SPECIFICATIONS Test Condition Symbol IL VOH VOL VIH VIL IOH IOL Parameter Quiescent Current High Level Output Voltage Low Level Output Voltage Low Level Input Voltage Output Drive Current Output Sink Current IOZ CI Input Capacitance VO (V) 0/5 0/10 0/15 0/20 0/5 0/10 0/15 5/0 10/0 15/0 High Level Input Voltage Input Leakage Current 3-State Output II VI (V) 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 Value |IO| VDD (µA) (V) <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 10 15 TA = 25°C Min. Typ. Max. 0.02 0.02 0.02 0.04 1 2 4 20 4.95 9.95 14.95 -40 to 85°C -55 to 125°C Min. Min. 30 60 120 600 4.95 9.95 14.95 0.05 0.05 0.05 4.95 9.95 14.95 3.5 7 11 1.5 3 4 -3.2 -1 -2.6 -6.8 6 15.6 40.8 Max. 30 60 120 600 0.05 0.05 0.05 3.5 7 11 -1.36 -0.44 -1.1 -3.0 2.6 6.63 17.3 Max. 3.5 7 11 -1.15 -0.36 -0.9 -2.4 2.1 5.4 14.2 µA V 0.05 0.05 0.05 1.5 3 4 Unit V V 1.5 3 4 -1.15 -0.36 -0.9 -2.4 2.1 5.4 14.2 V mA mA 0/18 Any Input 18 ±10-5 ±0.1 ±1 ±1 µA 0/18 Any Input 18 ±10-4 ±0.4 ±12 ±12 µA 5 7.5 Any Input pF The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V 3/9 HCF4502B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ, tr = tf = 20 ns) Test Condition Symbol tPHL tPLH tPHZ tPZH tPLZ tPZL tTLH tTHL Parameter Propagation Delay Time (Data or Inhibit) Propagation Delay Time (Data or Inhibit) Disable Delay Time (Output High to High Impedance) Disable Delay Time (High Impedance to Output High) Disable Delay Time (Output Low to High Impedance) Disable Delay Time (High Impedance to Output Low) Transition Time Transition Time VDD (V) 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 (*) Typical temperature coefficent for all VDD value is 0.3 %/°C. 4/9 Value (*) Min. Unit Typ. Max. 135 60 40 190 90 65 60 40 30 110 50 40 125 65 55 125 55 40 100 50 40 60 30 20 270 120 80 380 180 30 120 80 60 220 100 80 250 130 110 250 110 80 200 100 80 120 60 40 ns ns ns ns ns ns ns ns HCF4502B TEST CIRCUIT TEST SWITCH tPLH, tPHL Open tPZL, tPLZ VDD tPZH, tPHZ VSS CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200KΩ RT = ZOUT of pulse generator (typically 50Ω) WAVEFORM 1: PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle) 5/9 HCF4502B WAVEFORM 2: OUTPUT ENABLE AND DISABLE TIME (f=1MHz; 50% duty cycle) 6/9 HCF4502B Plastic DIP-16 (0.25) MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 0.77 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 7/9 HCF4502B SO-16 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45˚ (typ.) D 9.8 E 5.8 10 0.385 6.2 0.228 0.393 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8 ˚ (max.) PO13H 8/9 HCF4502B Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. © http://www.st.com 9/9