STMICROELECTRONICS MC34063ABN

MC34063AB - MC34063AC
MC34063EB - MC34063EC
DC/DC converter control circuits
Features
■
Output switch current in excess of 1.5 A
■
2 % reference accuracy
■
Low quiescent current: 2.5 mA (typ.)
■
Operating from 3 V to 40 V
■
Frequency operation to 100 kHz
■
Active current limiting
DIP-8
SO-8
Description
The MC34063A/E series is a monolithic control
circuit delivering the main functions for DC/DC
voltage converting.
designed for step-down, step-up and voltageinverting applications.
The device contains an internal temperature
compensated reference, comparator, duty cycle
controlled oscillator with an active current limit
circuit, driver and high current output switch.
Output voltage is adjustable through two external
resistors with a 2 % reference accuracy.
Employing a minimum number of external
components the MC34063A/E devices series is
Table 1.
Device summary
Order codes
DIP-8
SO-8
MC34063ABN (1)
MC34063ABD-TR
(1)
MC34063ACD-TR
MC34063ACN
MC34063EBN
MC34063EBD-TR
MC34063ECN
MC34063ECD-TR
1. The "A" version is not recommended for new designs.
November 2007
Rev 10
1/23
www.st.com
23
Contents
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Contents
1
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5
Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6
Typical application circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2/23
MC34063AB - MC34063AC - MC34063EB - MC34063EC
1
Diagram
Figure 1.
Block diagram
Diagram
3/23
Pin configuration
MC34063AB - MC34063AC - MC34063EB - MC34063EC
2
Pin configuration
Figure 2.
Pin connections
Table 2.
Pin description
Pin n°
Symbol
1
SWC
Switch collector
2
SWE
Switch emitter
3
TC
4
GND
5
CII
Comparator inverting input
6
VCC
Voltage supply
7
IPK
IPK sense
8
DRC
4/23
Name and function
Timing capacitor
Ground
Voltage driver collector
MC34063AB - MC34063AC - MC34063EB - MC34063EC
3
Maximum ratings
Table 3.
Absolute maximum ratings
Symbol
Maximum ratings
Parameter
VCC
Power supply voltage
VIR
Comparator input voltage range
Value
Unit
50
V
-0.3 to 40
V
VSWC
Switch collector voltage
40
V
VSWE
Switch emitter voltage (VSWC = 40V)
40
V
VCE
Switch collector to emitter voltage
40
V
VDC
Driver collector voltage
40
V
IDC
Driver collector current
100
mA
ISW
Switch current
1.5
A
PTOT
Power dissipation at TA = 25°C
TJ
Operating junction temperature
TSTG
for DIP-8
1.25
for SO-8
0.625
W
Storage temperature range
for AC and EC series
TOP
150
°C
-40 to 150
°C
0 to 70
Operating ambient temperature range for AB series
-40 to 85
for EB series
-40 to 125
°C
Note:
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these condition is not implied.
Table 4.
Thermal data
Symbol
Parameter
DIP-8
SO-8
Unit
RthJA
Thermal resistance junction-ambient (1)
100
160
°C/W
RthJC
Thermal resistance junction-case
42
20
°C/W
1. This value depends from thermal design of PCB on which the device is mounted.
5/23
Electrical characteristics
4
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Electrical characteristics
(Refer to the test circuits, VCC = 5 V, TA = TLOW to THIGH, unless otherwise specified, see
Note 2)
Table 5.
Oscillator
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
fOSC
Frequency
VPIN5 = 0V, CT = 1 nF, TA = 25°C
24
33
42
kHz
ICHG
Charge current
VCC = 5 to 40V, TA = 25°C
24
33
42
µA
Discharge current
VCC = 5 to 40V, TA = 25°C
140
200
260
µA
Discharge to charge
current ratio
PIN 7 = VCC, TA = 25°C
5.2
6.2
7.5
µA
250
300
350
mV
Min.
Typ.
Max.
Unit
IDISCHG
IDISCHG/ICHG
VIPK(sense)
Table 6.
Current limit sense voltage ICHG = IDISCHG, TA = 25°C
Output switch
Symbol
Parameter
VCE(sat)
Saturation voltage, darlington
connection
ISW = 1 A, PIN 7, 8 connected
1
1.3
V
VCE(sat)
Saturation voltage
ISW = 1 A, RPIN8 = 82 Ω to VCC
Forced β ~ 20
0.45
0.7
V
DC current gain
ISW = 1 A,VCE = 5 V, TA = 25°C
Collector off-state current
VCE = 40 V
0.01
100
µA
Min.
Typ.
Max.
Unit
TA = 25°C
1.225
1.25
1.275
TA = TLOW to THIGH
1.21
hFE
IC(off)
Table 7.
Symbol
VTH
Regline
IIB
6/23
Test conditions
50
120
Comparator
Parameter
Threshold voltage
Test conditions
V
1.29
Threshold voltage line
regulation
VCC = 3 to 40 V
1
5
mV
Input bias current
VIN = 0 V
-5
-400
nA
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Table 8.
Total device
Symbol
ICC
Parameter
Supply current
VSTART-UP Start-up voltage (Note 4)
Note:
Electrical characteristics
Test conditions
Typ.
Max.
for MC34063A
2.5
4
for MC34063E
1.5
4
for MC34063A
TA = 25°C
CT = 1 µF, PIN 5 = 0 for MC34063E
2.1
VCC = 5 to 40 V
CT = 1 nF
PIN 7 = VCC
VPIN5 >VTH
PIN 2 = GND
Remaining pins
open
Min.
Unit
mA
V
1.5
1
Maximum package power dissipation limit must be observed.
2
TLOW = 0 °C, THIGH = 70 °C (AC and EC series); TLOW = -40 °C, THIGH = 85 °C (AB series);
TLOW = -40 °C, THIGH = 125 °C (EB series).
3
If darlington configuration is not used, care must be taken to avoid deep saturation of output
switch. The resulting switch-off time may be adversely affected. In a darlington configuration
the following output driver condition is suggested:
Forced β of output current switch = ICOUTPUT/(ICDRIVER - 1 mA(a)) ≥ 10
4
Start-up voltage is the minimum power supply voltage at which the internal oscillator begins
to work.
a. Current less due to a built in 1 kΩ anti leakage resistor.
7/23
Typical performance characteristics
MC34063AB - MC34063AC - MC34063EB - MC34063EC
5
Typical performance characteristics
Figure 3.
Emitter follower configuration
Figure 4.
output saturation voltage vs emitter
current
Output switch ON-OFF time vs
oscillator timing capacitor
Figure 5.
Common emitter configuration
Figure 6.
output switch saturation voltage vs
collector current
Darlington configuration collector
emitter saturation voltage (VCEsat)
vs temperature
8/23
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Typical performance characteristics
Figure 7.
Power collector emitter saturation
voltage (VCEsat) vs temperature
Figure 8.
Current limit sense voltage (VIPK)
vs temperature
Figure 9.
Reference voltage vs temperature
Figure 10. Bias current vs temperature
Figure 11. Supply current vs temperature
Figure 12. Supply current vs input voltage
9/23
Typical application circuit
6
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Typical application circuit
Figure 13. Step-up converter
Figure 14. Printed evaluation board
PIN 1 = VOUT
PIN 2 = GND
PIN 3 = GND
PIN 4 = VIN
Table 9.
Test condition (VOUT = 28 V)
Test
Conditions
Value (Typ.)
Unit
Line Regulation
VIN = 8 to 16 V, IO = 175 mA
30
mV
Load Regulation
VIN = 12 V, IO = 75 to 175 mA
10
mV
Output Ripple
VIN = 12 V, IO = 175 mA
300
mV
Efficiency
VIN = 12 V, IO = 175 mA
89
%
10/23
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Typical application circuit
Figure 15. Step-down converter
Figure 16. Printed evaluation board
PIN 1 = VOUT
PIN 2 = GND
PIN 3 = GND
PIN 4 = VIN
Table 10.
Test condition (VOUT = 5 V)
Test
Conditions
Value (typ.)
Unit
Line regulation
VIN = 15 to 25 V, IO = 500 mA
5
mV
Load regulation
VIN = 25 V, IO = 50 to 500 mA
30
mV
Output ripple
VIN = 25 V, IO = 500 mA
100
mV
Efficiency
VIN = 25 V, IO = 500 mA
80
%
ISC
VIN = 25 V, RLOAD = 0.1 Ω
1.2
A
11/23
Typical application circuit
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Figure 17. Voltage inverting converter
Figure 18. Printed evaluation board
PIN 1 = VOUT
PIN 2 = GND
PIN 3 = GND
PIN 4 = VIN
Table 11.
Test condition (VOUT = 12 V)
Test
Conditions
Value (typ.)
Unit
Line regulation
VIN = 4.5 to 6 V, IO = 100 mA
15
mV
Load regulation
VIN = 5 V, IO = 10 to 100 mA
20
mV
Output ripple
VIN = 5 V, IO = 100 mA
230
mV
Efficiency
VIN = 5 V, IO = 100 mA
58
%
ISC
VIN = 5 V, RLOAD = 0.1 Ω
0.9
A
12/23
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Table 12.
Calculation
Parameter
ton/toff
(ton + toff) max
CT
IPK(switch)
Typical application circuit
Step-Up
(Discontinuous mode)
Step-Down
(Continuous mode)
OUT + V F – V IN ( mi
-----------------------------------------------V IN ( min ) – V sat
V OUT + V F
--------------------------------------------------N ( min ) – V sat – V OU
1/fmin
1/fmin
4.5x10-5t
4.5x10-5t
on
Voltage Inverting
(Discontinuous mode)
V OUT + V F
-----------------------------V IN – V sat
1/fmin
on
4.5x10-5ton
2Iout(max)[(ton/toff)+1]
2Iout(max)
2Iout(max)[(ton/toff)+1]
RSC
0.3/IPK(switch)
0.3/IPK(switch)
0.3/IPK(switch)
CO
I out t on
-----------------------------V ripple ( p – p )
I PK ( switch ) ( t on + t off )
-----------------------------------------------------8V ripple ( p – p )
I out t on
-----------------------------V ripple ( p – p )
L(min)
Note:
V IN ( min ) – V sat
----------------------------------- × t on ( mi
I PK ( switch )
– V sat – V out
------------------------------------------------ × t on(
I PK ( switch )
N ( min )
V IN ( min ) – V sat
----------------------------------- × t on ( mi
I PK ( switch )
VSAT = Saturation voltage of the output switch
VF = Forward voltage drop of the output rectifier
The following power supply characteristics must be chosen:
VIN = Nominal input voltage
VOUT = Desired output voltage, |VOUT| = 1.25 (1 + R2/R1)
IOUT = Desired output current
fMIN = Minimum desired output switching frequency at the selected values of VIN and IO
VRIPPLE = Desired peak to peak output ripple voltage. In practice, the calculated capacitor
value will and to be increased due to its equivalent series resistance and board layout. The
ripple voltage should be kept to a low value since it will directly affect the line and load
regulation.
13/23
Typical application circuit
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Figure 19. Step-up with external NPN switch
Figure 20. Step-down with external NPN switch
14/23
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Typical application circuit
Figure 21. Step-down with external PNP switch
Figure 22. Voltage inverting with external NPN switch
15/23
Typical application circuit
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Figure 23. Voltage inverting with external PNP saturated switch
Figure 24. Dual output voltage
16/23
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Typical application circuit
Figure 25. Higher output power, higher input voltage
17/23
Package mechanical data
7
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
18/23
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Package mechanical data
Plastic DIP-8 mechanical data
mm.
inch.
Dim.
Min.
A
Typ.
Max.
Min.
3.3
Typ.
Max.
0.130
a1
0.7
B
1.39
1.65
0.055
0.065
B1
0.91
1.04
0.036
0.041
b
b1
0.028
0.5
0.38
0.020
0.5
D
0.015
0.020
9.8
0.386
E
8.8
0.346
e
2.54
0.100
e3
7.62
0.300
e4
7.62
0.300
F
7.1
0.280
I
4.8
0.189
L
Z
3.3
0.44
0.130
1.6
0.017
0.063
P001F
19/23
Package mechanical data
MC34063AB - MC34063AC - MC34063EB - MC34063EC
SO-8 mechanical data
Dim.
mm.
Min.
Typ.
inch.
Max.
Min.
Typ.
Max.
A
1.35
1.75
0.053
0.069
A1
0.10
0.25
0.04
0.010
A2
1.10
1.65
0.043
0.065
B
0.33
0.51
0.013
0.020
C
0.19
0.25
0.007
0.010
D
4.80
5.00
0.189
0.197
E
3.80
4.00
0.150
0.157
e
1.27
0.050
H
5.80
6.20
0.228
0.244
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
k
ddd
8° (max.)
0.1
0.04
0016023/C
20/23
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Package mechanical data
Tape & reel SO-8 mechanical data
mm.
inch.
Dim.
Min.
A
Typ.
Max.
Min.
330
Max.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
Typ.
0.504
22.4
0.519
0.882
Ao
8.1
8.5
0.319
0.335
Bo
5.5
5.9
0.216
0.232
Ko
2.1
2.3
0.082
0.090
Po
3.9
4.1
0.153
0.161
P
7.9
8.1
0.311
0.319
21/23
Revision history
MC34063AB - MC34063AC - MC34063EB - MC34063EC
8
Revision history
Table 13.
Document revision history
Date
Revision
22-Jun-2004
9
20-Nov-2007
10
22/23
Changes
Added Table 1.
MC34063AB - MC34063AC - MC34063EB - MC34063EC
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
23/23