STD1802T4-A Low voltage fast-switching NPN power transistor Features ■ This device is qualified for automotive application ■ Very low collector to emitter saturation voltage ■ High current gain characteristic ■ Fast-switching speed ■ Surface-mounting DPAK (TO-252) power package in tape & reel (suffix “T4) 3 1 TO-252 DPAK Description (suffix “T4”) The device is manufactured in Planar technology with “Base Island” layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage. Figure 1. Internal schematic diagram Applications ■ CCFL drivers ■ Voltage regulators ■ Relay drivers ■ High efficiency, low voltage, switching applications Table 1. Device summary Order code Marking Package Packaging STD1802T4-A D1802 DPAK Tape & reel June 2007 Rev 1 1/10 www.st.com 10 Electrical ratings 1 STD1802T4-A Electrical ratings Table 2. Absolute maximum rating Symbol Value Unit VCBO Collector-base voltage (IE =0) 80 V VCEO Collector-emitter voltage (IB =0) 60 V VEBO Emitter-base voltage (IC =0) 6 V Collector current 3 A Collector peak current (tP < 5ms) 6 A Base current 1 A Ptot Total dissipation at T c ≤ 25°C 15 W Tstg Storage temperature -65 to 150 °C 150 °C Value Unit 8.33 °C/W IC ICM IB TJ Table 3. Symbol Rthj-case 2/10 Parameter Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case __max STD1802T4-A 2 Electrical characteristics Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 4. Symbol Electrical characteristics Parameter Test Conditions Min. Typ. Max. Unit ICBO Collector cut-off current (IE =0) VCB = 40V 0.1 µA IEBO Emitter cut-off current (IC =0) VEB = 4V 0.1 µA V(BR)CBO Collector-base breakdown voltage (IE = 0) IC =100µA 80 V V(BR)CEO Collector-emitter breakdown voltage (IB = 0) IC =1mA 60 V V(BR)EBO Emitter-base breakdown voltage (IC = 0) IE =100µA 6 V VCE(sat) (1) Collector-emitter saturation voltage VBE(sat) (1) Base-emitter saturation voltage hFE (1) fT CCBO tON ts tf IC =2A 150 300 mV IC =3A _ _ IB =100mA __ _ IB =150mA 200 400 mV IC =2A _ _ IB =100mA 0.9 1.2 V IC =100mA V CE =2V 200 IC =3A V CE =2V 100 Transition frequency VCE =10V IC =50mA 150 MHz Collector-base capacitance VCB =10V f = 1MHz 50 pF IC =1A VCC =30V DC current gain Resistive load Turn-on time Storage time Fall time IB1 =-IB2 =0.1A 400 50 ns 1.35 µs 120 ns Note (1) Pulsed duration = 300 µs, duty cycle ≤1.5% 3/10 Electrical characteristics 2.1 4/10 STD1802T4-A Electrical characteristics (curves) Figure 2. Derating curve Figure 3. DC current gain Figure 4. Collector-emitter saturation voltage Figure 5. Collector-emitter saturation voltage Figure 6. Base-emitter saturation voltage Figure 7. Base-emitter on voltage STD1802T4-A Figure 8. Electrical characteristics Switching times resistive load Figure 10. Switching times resistive load Figure 9. Switching times resistive load Figure 11. Switching times inductive load Figure 12. Switching times resistive load 5/10 Electrical characteristics 2.2 Test circuits Figure 13. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 6/10 STD1802T4-A STD1802T4-A 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 7/10 Package mechanical data STD1802T4-A TO-252 (DPAK) MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. A 2.20 2.40 0.087 TYP. 0.094 MAX. A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.213 C 0.45 0.60 0.018 0.024 C2 0.48 0.60 0.019 0.024 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.252 0.260 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 L2 0.8 0.398 0.031 L4 0.60 1.00 0.024 0.039 V2 0o 8o 0o 0o P032P_B 8/10 STD1802T4-A 4 Revision history Revision history Table 5. Revision history Date Revision 28-Jun-2007 1 Changes Initial release. 9/10 STD1802T4-A Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10