STD724 NPN MEDIUM POWER TRANSISTORS Features ■ SURFACE MOUNTING DEVICE IN MEDIUM POWER DPAK POWER PACKAGE ■ AVAILABLE IN TAPE & REEL PACKING ■ IN COMPLIANCE WITH THE 2002/93/EC EUROPEAN DIRECTIVE 3 1 Applications ■ VOLTAGE REGULATION ■ RELAY DRIVER ■ GENERIC SWITCH DPAK Description Internal Schematic Diagram The device is a NPN transistor manufactured using planar Technology resulting in rugged high performance devices. Order codes Part Number Marking Package Packing STD724T4 D724 DPAK Tape & reel October 2005 Rev 2 1/10 www.st.com 10 STD724 1 Electrical Ratings 1 Electrical Ratings Table 1. Absolute Maximum Rating Symbol Parameter Value Unit VCBO Collector-Base Voltage (IE = 0) 60 V VCEO Collector-Emitter Voltage (IB = 0) 30 V VEBO Collector-Base Voltage (IC = 0) 5 V Collector Current 3 A Collector Peak Current (tP < 5ms) 6 A Base Current 1 A IBM Base Peak Current (tP < 5ms) 2 A PTOT Total dissipation at Tc = 25°C 15 W TSTG Storage Temperature -65 to 150 150 °C Value Unit 8.33 °C/W IC ICM IB TJ Table 2. Symbol Rthj-amb 2/10 Max. Operating Junction Temperature Thermal Data Parameter Thermal Resistance Junction-Amb ____________________Max STD724 2 2 Electrical Characteristics Electrical Characteristics Table 3. Symbol Electrical Characteristics (TCASE = 25°C; unless otherwise specified) Parameter Test Conditions Min. Typ. Max. Unit Collector Cut-off Current (V BE = 0) VCE = 60V 10 μA ICEO Collector Cut-off Current (IB = 0) VCE = 30V 100 μA IEBO Emitter Cut-off Current (IC = 0) VEB = 5V 10 μA Collector-Base Breakdown Voltage (IE = 0) IC = 100μA 60 V V(BR)CEO Collector-Emitter Breakdown Note 1 Voltage (IB = 0) IC = 10 mA 30 V Collector-Emitter Breakdown Voltage (IC = 0) IE = 100 μA 5 V ICES V(BR)CBO V(BR)EBO VCE(sat) Note 1 VBE(sat) Note 1 hFE fT IC = 1 A IB = 50 mA IC = 2 A IB = 100 mA IC = 3 A Base-Emitter Saturation Voltage IC = 2 A Collector-Emitter Saturation Voltage DC Current Gain Transistor Frequency IB = 150 mA 0.4 0.7 1.1 V V V IB = 100 mA 1.2 V IC = 100 mA VCE = 2 V IC = 1 A VCE = 2 V IC = 3 A VCE = 2 V V CE = 10 V Ic= 0.1 A 100 80 30 300 100 MHz 1 Pulsed duration = 300 μs, duty cycle ≤1.5%. 3/10 STD724 2 Electrical Characteristics 2.1 Electrical characteristics (curve) Figure 1. DC Current Gain Figure 3. Collector-emitter saturation voltage Figure 4. Base-emitter saturation voltage Figure 5. Switching times on resistive load Switching times resistive on load 4/10 Figure 2. Figure 6. DC Current Gain STD724 Figure 7. 2 Electrical Characteristics Reverse biased area 5/10 3 Package Mechanical Data 3 STD724 Package Mechanical Data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/10 STD724 3 Package Mechanical Data TO-252 (DPAK) MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 2.20 2.40 0.087 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.213 C 0.45 0.60 0.018 0.024 C2 0.48 0.60 0.019 0.024 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.252 0.260 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.398 1.00 0.024 L2 L4 V2 0.8 0.60 0 o 0.031 8 o 0 o 0.039 0o P032P_B 7/10 STD724 4 Packing Mechanical Data 4 Packing Mechanical Data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 8/10 inch 1.5 D1 1.5 E 1.65 MIN. MAX. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 0.059 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 1.574 16.3 0.618 0.641 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STD724 5 5 Revision History Revision History Date Revision 17-Oct-2005 2 Changes Inserted curves 9/10 STD724 5 Revision History Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10