STMICROELECTRONICS STGP10NC60HD

STGB10NC60HD - STGF10NC60HD
STGP10NC60HD
N-channel 600V - 10A - TO-220 - D2PAK - TO-220FP
very fast PowerMESH™ IGBT
Features
IC
VCE(sat)
(Max)@ 25°C @100°C
Type
VCES
STGB10NC60HD
600V
< 2.5V
10A
STGP10NC60HD
600V
< 2.5V
10A
STGF10NC60HD
600V
< 2.5V
6A
3
1
D²PAK
■
Low on-voltage drop (Vcesat)
■
Low CRES / CIES ratio (no cross-conduction
susceptibility)
■
Very soft ultra fast recovery antiparallel diode
3
3
1
2
TO-220FP
2
1
TO-220
Applications
■
High frequency motor controls
■
Smps and pfc in both hard switch and resonant
topologies
■
Motor drivers
Figure 1.
Internal schematic diagram
Description
Using the latest high voltage technology based on
a patented strip layout, STMicroelectronics has
designed an advanced family of IGBTs, the
PowerMESH™ IGBTs, with outstanding
performances. The suffix “H” identifies a family
optimized for high frequency applications in order
to achieve very high switching performances
(reduced tfall) manta in ing a low voltage drop.
Table 1.
Device summary
Order codes
Marking
Package
Packaging
STGB10NC60HD
GB10NC60HD
D²PAK
Tape & reel
STGP10NC60HD
GP10NC60HD
TO-220
Tube
STGF10NC60HD
GF10NC60HD
TO-220FP
Tube
October 2007
Rev 4
1/17
www.st.com
17
Contents
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................ 7
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
1
Electrical ratings
Electrical ratings
Table 2.
Absolute maximum ratings
Value
Symbol
Parameter
Unit
TO-220 / D²PAK
TO-220FP
VCES
Collector-emitter voltage (VGE = 0)
IC(1)
Collector current (continuous) at TC = 25°C
20
9
A
IC(1)
Collector current (continuous) at TC = 100°C
10
6
A
ICL(2)
Collector current (pulsed)
40
A
Diode RMS forward current at TC = 25°C
10
A
VGE
Gate-emitter voltage
±20
V
PTOT
Total dissipation at TC = 25°C
65
23
W
VISO
Insulation withstand voltage (RMS) from all
three leads to external heat sink
(t=1s;TC=25°C)
--
2500
V
IF
Tj
600
Operating junction temperature
V
– 55 to 150
°C
1. Calculated according to the iterative formula:
T
–T
JMAX
C
I ( T ) = ----------------------------------------------------------------------------------------------------C C
R
× V
(T , I )
THJ – C
CESAT ( MAX ) C C
2. Vclamp=80% of BVces, Tj=150°C, RG=10Ω, VGE=15V
Table 3.
Thermal resistance
Value
Symbol
Parameter
Rthj-case
Thermal resistance junction-case max
Rthj-amb
Thermal resistance junction-ambient max
Unit
TO-220 / D²PAK
TO-220FP
1.9
5
62.5
°C/W
°C/W
3/17
Electrical characteristics
2
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 4.
Symbol
Static
Parameter
Collector-emitter
VBR(CES) breakdown voltage
(VGE= 0)
IC= 1mA
150
1
µA
mA
Gate-emitter leakage
current (VCE = 0)
VGE= ±20V
±100
nA
Forward transconductance
VCE = 15V, IC= 5A
ICES
Collector cut-off current
(VGE = 0)
IGES
Cres
Qg
Qge
Qgc
V
VCE= Max rating,TC= 25°C
VCE=Max rating,TC= 125°C
VCE= VGE, IC= 250 µA
Coes
600
Unit
V
Gate threshold voltage
Cies
Max.
5.75
VGE(th)
Symbol
Typ.
V
V
Collector-emitter saturation VGE= 15V, IC= 5A
voltage
VGE= 15V, IC= 5A, Tc= 125°C
Table 5.
Min.
2.5
VCE(sat)
gfs
4/17
Test conditions
1.9
1.7
3.75
3.5
S
Dynamic
Parameter
Input capacitance
Output capacitance
Reverse transfer
capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
Test conditions
VCE = 25V, f = 1MHz,
VGE = 0
VCE = 390V, IC = 5A,
VGE = 15V,
(see Figure 19)
Min.
Typ.
Max.
Unit
365
43
8.3
pF
pF
pF
19.2
4.5
7
nC
nC
nC
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Table 6.
Symbol
Electrical characteristics
Switching on/off (inductive load)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VCC = 390V, IC = 5A
td(on)
tr
(di/dt)on
Turn-on delay time
Current rise time
Turn-on current slope
RG= 10Ω, VGE= 15V,
Tj= 25°C
(see Figure 18)
(see Figure 20)
14.2
5
1000
ns
ns
A/µs
14
5
920
ns
ns
A/µs
27
72
85
ns
ns
ns
50
108
139
ns
ns
ns
VCC = 390V, IC = 5A
td(on)
tr
(di/dt)on
Turn-on delay time
Current rise time
Turn-on current slope
RG= 10Ω, VGE= 15V,
Tj=125°C
(see Figure 18)
(see Figure 20)
Vcc = 390V, IC = 5A,
tr(Voff)
td(off)
tf
Off voltage rise time
Turn-off delay time
Current fall time
RGE = 10Ω,
VGE = 15V,TJ=25°C
(see Figure 18)
(see Figure 20)
Vcc = 390V, IC = 5A,
tr(Voff)
td(off)
tf
Table 7.
Symbol
Eon(1)
Eoff(2)
Ets
Eon(1)
Eoff(2)
Ets
Off voltage rise time
Turn-off delay time
Current fall time
RGE=10Ω, VGE =15V,
Tj=125°C
(see Figure 18)
(see Figure 20)
Switching energy (inductive load)
Parameter
Turn-on switching losses
Turn-off switching losses
Total switching losses
Turn-on switching losses
Turn-off switching losses
Total switching losses
Test conditions
VCC = 390V, IC = 5A
RG= 10Ω, VGE=15V, Tj=25°C
(see Figure 18)
VCC = 390V, IC = 5A
RG= 10Ω, VGE= 15V,
Tj= 125°C
(see Figure 18)
Min.
Typ.
Max.
Unit
31.8
95
126.8
µJ
µJ
µJ
61.8
173
234.8
µJ
µJ
µJ
1. Eon is the turn-on losses when a typical diode is used in the test circuit in Figure 18. If the IGBT is offered
in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the
same temperature (25°C and 125°C)
2. Turn-off losses include also the tail of the collector current
5/17
Electrical characteristics
Table 8.
Symbol
Collector-emitter diode
Parameter
Test conditions
If = 2.5A
Vf
Forward on-voltage
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Tj = 25°C, di/dt = 100 A/µs
(see Figure 21)
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Tj =125°C, di/dt = 100A/µs
(see Figure 21)
Qrr
Irrm
trr
Qrr
Irrm
6/17
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
If = 2.5A, Tj = 125°C
If = 5A,VR = 40V,
If = 5A,VR = 40V,
Min.
Typ.
Max.
Unit
1.75
1.3
2.1
V
V
21.5
14.2
1.32
ns
nC
A
33
30.5
1.85
ns
nC
A
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Electrical characteristics
2.1
Electrical characteristics (curves)
Figure 2.
Output characteristics
Figure 3.
Transfer characteristics
Figure 4.
Transconductance
Figure 5.
Collector-emitter on voltage vs
temperature
Figure 6.
Gate charge vs gate-source voltage Figure 7.
Capacitance variations
7/17
Electrical characteristics
Figure 8.
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Normalized gate threshold voltage
vs temperature
Figure 10. Normalized breakdown voltage vs
temperature
Figure 9.
Collector-emitter on voltage vs
collector current
Figure 11. Switching losses vs temperature
Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector
current
8/17
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Electrical characteristics
Figure 14. Thermal Impedance for TO-220 /
D²PAK
Figure 15. Turn-off SOA
Figure 16. Thermal Impedance for TO-220FP
Figure 17. Emitter-collector diode
characteristics
9/17
Test circuit
3
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Test circuit
Figure 18. Test circuit for inductive load
switching
Figure 19. Gate charge test circuit
Figure 20. Switching waveform
Figure 21. Diode recovery time waveform
10/17
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
11/17
Package mechanical data
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
TO-220 mechanical data
mm
inch
Dim
Min
A
b
b1
c
D
D1
E
e
e1
F
H1
J1
L
L1
L20
L30
∅P
Q
12/17
Typ
4.40
0.61
1.14
0.49
15.25
Max
Min
4.60
0.88
1.70
0.70
15.75
0.173
0.024
0.044
0.019
0.6
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
1.27
10
2.40
4.95
1.23
6.20
2.40
13
3.50
Max
0.181
0.034
0.066
0.027
0.62
0.050
16.40
28.90
3.75
2.65
Typ
0.409
0.106
0.202
0.051
0.256
0.107
0.551
0.154
0.645
1.137
3.85
2.95
0.147
0.104
0.151
0.116
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Package mechanical data
D2PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
inch
DIM.
MAX.
MIN.
A
MIN.
4.4
TYP
4.6
0.173
TYP.
0.181
MAX.
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
D1
E
8
10
10.4
0.393
4.88
5.28
0.192
0.208
E1
G
0.368
0.315
8.5
0.334
L
15
15.85
0.590
0.625
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
0.126
R
0.4
0º
0.015
4º
3
V2
1
13/17
Package mechanical data
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
TO-220FP MECHANICAL DATA
mm.
DIM.
MIN.
A
4.4
inch
TYP
MAX.
MIN.
TYP.
4.6
0.173
0.181
MAX.
0.106
B
2.5
2.7
0.098
D
2.5
2.75
0.098
0.108
E
0.45
0.7
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.7
0.045
0.067
F2
1.15
1.7
0.045
0.067
G
4.95
5.2
0.195
0.204
G1
2.4
2.7
0.094
0.106
H
10
10.4
0.393
0.409
L2
16
0.630
L3
28.6
30.6
1.126
1.204
L4
9.8
10.6
.0385
0.417
L5
2.9
3.6
0.114
0.141
L6
15.9
16.4
0.626
0.645
9
9.3
0.354
0.366
Ø
3
3.2
0.118
0.126
B
D
A
E
L7
L3
L6
F2
H
G
G1
F
F1
L7
L2
14/17
L5
1 2 3
L4
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
5
Packaging mechanical data
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
MAX.
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
0.933 0.956
* on sales type
15/17
Revision history
6
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Revision history
Table 9.
16/17
Document revision history
Date
Revision
Changes
30-Jan-2006
1
Initial release.
06-Nov-2006
2
Complete version
08-Feb-2007
3
The document has been reformatted
05-Oct-2007
4
Added TO-220FP, Table 2 has been updated
STGB10NC60HD - STGP10NC60HD - STGF10NC60HD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17