STMICROELECTRONICS STP19NF20

STB19NF20 - STF19NF20
STP19NF20
N-channel 200V - 0.15Ω - 15A - TO-220 - D2PAK - TO-220FP
MESH OVERLAY™ Power MOSFET
General features
Type
VDSS
RDS(on)
ID
pw
STB19NF20
200V
<0.16Ω
15A
90W
STF19NF20
200V
<0.16Ω
15A
25W
STP19NF20
200V
<0.16Ω
15A
90W
■
Extremely high dv/dt capability
■
Gate charge minimized
■
Very low intrinsic capacitances
3
3
1
2
1
D²PAK
TO-220
3
1
2
TO-220FP
Description
This Power MOSFET is designed using the
company’s consolidated strip layout-based MESH
OVERLAY™ process. This technology matches
and improves the performances compared with
standard parts from various sources.
Internal schematic diagram
Applications
■
Switching application
Order codes
Part number
Marking
Package
Packaging
STB19NF20
19NF20
D²PAK
Tape & reel
STF19NF20
19NF20
TO-220FP
Tube
STP19NF20
19NF20
TO-220
Tube
February 2007
Rev 4
1/16
www.st.com
16
Contents
STB19NF20 - STF9NF20 - STP19NF20
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................. 6
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
................................................ 9
STB19NF20 - STF9NF20 - STP19NF20
1
Electrical ratings
Electrical ratings
Table 1.
Absolute maximum ratings
Value
Symbol
Parameter
Unit
TO-220 / D²PAK
TO-220FP
VDS
Drain-source voltage (VGS = 0)
200
V
VGS
Gate-source voltage
± 20
V
ID
Drain current (continuous) at TC = 25°C
15
15(1)
A
ID
Drain current (continuous) at TC=100°C
9.45
9.45(1)
A
IDM(2)
Drain current (pulsed)
60
60 (1)
A
PTOT
Total dissipation at TC = 25°C
90
25
W
0.72
0.2
W/°C
--
2500
V
Derating factor
VISO
dv/dt(3)
TJ
Tstg
Insulation withstand voltage (RMS) from all
three leads to external heat sink
(t=1s;TC=25°C)
Peak diode recovery voltage slope
Operating junction temperature
Storage temperature
15
V/ns
-55 to 150
°C
1. Limited by package
2. Pulse width limited by safe operating area
3. ISD ≤15A, di/dt ≤300A/µs, VDD = 80%V(BR)DSS
Table 2.
Thermal data
Value
Symbol
Parameter
Unit
TO-220
Rthj-case
Thermal resistance junction-case max
Rthj-pcb
Thermal resistance junction-pcb max
D²PAK
1.39
--
TO-220FP
5
50
°C/W
--
Rthj-a
Thermal resistance junction-ambient max
62.5
°C/W
Tl
Maximum lead temperature for soldering
purpose
300
°C
Table 3.
Avalanche data
Symbol
Parameter
Value
Unit
IAR
Avalanche current, repetitive or not-repetitive
(pulse width limited by Tj Max)
15
A
EAS
Single pulse avalanche energy
(starting Tj=25°C, Id=Iar, Vdd=50V)
110
mJ
3/16
Electrical characteristics
2
STB19NF20 - STF9NF20 - STP19NF20
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 4.
Symbol
V(BR)DSS
On/off states
Parameter
Drain-source breakdown
voltage
Test conditions
ID = 1mA, VGS= 0
Zero gate voltage drain
current (VGS = 0)
IGSS
Gate body leakage current
(VDS = 0)
VGS = ±20V
VGS(th)
Gate threshold voltage
VDS= VGS, ID = 250µA
RDS(on)
Static drain-source on
resistance
VGS= 10V, ID= 7.5A
Symbol
gfs (1)
Ciss
Coss
Crss
Qg
Qgs
Qgd
Max.
200
2
Unit
V
1
10
µA
µA
±100
nA
3
4
V
0.15
0.16
Ω
Typ.
Max.
Unit
VDS = Max rating @125°C
Dynamic
Parameter
Test conditions
Min.
Forward transconductance
VDS =8V, ID = 7.5A
12
S
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS =25V, f=1 MHz,
VGS=0
800
165
26
pF
pF
pF
24
4.4
11.6
nC
nC
nC
Total gate charge
Gate-source charge
Gate-drain charge
VDD=160V, ID = 15A
VGS =10V
(see Figure 16)
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
4/16
Typ.
VDS = Max rating,
IDSS
Table 5.
Min.
STB19NF20 - STF9NF20 - STP19NF20
Table 6.
Symbol
td(on)
tr
td(off)
tf
Table 7.
Symbol
Electrical characteristics
Switching times
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
Min.
VDD=100 V, ID= 7.5A,
RG=4.7Ω, VGS=10V
(see Figure 15)
VDD = 100 V, ID = 7.5A,
RG = 4.7Ω, VGS = 10V
(see Figure 15)
Typ.
Max.
Unit
11.5
22
ns
ns
19
11
ns
ns
Source drain diode
Max
Unit
Source-drain current
15
A
ISDM(1)
Source-drain current (pulsed)
60
A
VSD(2)
Forward on voltage
ISD=15A, VGS=0
1.6
V
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD=15A, VDD=50V
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD=15A, VDD=50V
ISD
trr
Qrr
IRRM
trr
Qrr
IRRM
Parameter
Test conditions
di/dt = 100A/µs,
(see Figure 20)
di/dt = 100A/µs,
Tj=150°C (see Figure 20)
Min
Typ.
125
0.55
8.8
ns
µC
A
148
0.73
9.9
ns
µC
A
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration = 300µs, duty cycle 1.5%
5/16
Electrical characteristics
STB19NF20 - STF9NF20 - STP19NF20
2.1
Electrical characteristics (curves)
Figure 1.
Safe operating area for TO-220 /
D²PAK
Figure 2.
Thermal impedance for TO-220 /
D²PAK
Figure 3.
Safe operating area for TO-220FP
Figure 4.
Thermal impedance for TO-220FP
Figure 5.
Output characteristics
Figure 6.
Transfer characteristics
6/16
STB19NF20 - STF9NF20 - STP19NF20
Electrical characteristics
Figure 7.
Static drain-source on resistance
Figure 9.
Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage
vs temperature
Figure 8.
Normalized BVDSS vs temperature
Figure 12. Normalized on resistance vs
temperature
7/16
Electrical characteristics
Figure 13. Source-drain forward
characteristics
8/16
STB19NF20 - STF9NF20 - STP19NF20
Figure 14. Maximum avalanche energy vs
temperature
STB19NF20 - STF9NF20 - STP19NF20
3
Test circuit
Test circuit
Figure 15. Switching times test circuit for
resistive load
Figure 16. Gate charge test circuit
Figure 17. Test circuit for inductive load
Figure 18. Unclamped Inductive load test
switching and diode recovery times
circuit
Figure 19. Unclamped inductive waveform
Figure 20. Switching time waveform
9/16
Package mechanical data
4
STB19NF20 - STF9NF20 - STP19NF20
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
10/16
STB19NF20 - STF9NF20 - STP19NF20
Package mechanical data
TO-220 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.066
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.60
0.620
E
10
10.40
0.393
0.409
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.194
0.202
F
1.23
1.32
0.048
0.052
H1
6.20
6.60
0.244
0.256
J1
2.40
2.72
0.094
0.107
0.551
L
13
14
0.511
L1
3.50
3.93
0.137
L20
16.40
L30
0.154
0.645
28.90
1.137
øP
3.75
3.85
0.147
0.151
Q
2.65
2.95
0.104
0.116
11/16
Package mechanical data
STB19NF20 - STF9NF20 - STP19NF20
TO-220FP MECHANICAL DATA
mm.
DIM.
MIN.
A
4.4
inch
TYP
MAX.
MIN.
TYP.
4.6
0.173
0.181
MAX.
0.106
B
2.5
2.7
0.098
D
2.5
2.75
0.098
0.108
E
0.45
0.7
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.7
0.045
0.067
F2
1.15
1.7
0.045
0.067
G
4.95
5.2
0.195
0.204
G1
2.4
2.7
0.094
0.106
H
10
10.4
0.393
0.409
L2
16
0.630
L3
28.6
30.6
1.126
1.204
L4
9.8
10.6
.0385
0.417
L5
2.9
3.6
0.114
0.141
L6
15.9
16.4
0.626
0.645
9
9.3
0.354
0.366
Ø
3
3.2
0.118
0.126
B
D
A
E
L7
L3
L6
F2
H
G
G1
F
F1
L7
L2
12/16
L5
1 2 3
L4
STB19NF20 - STF9NF20 - STP19NF20
Package mechanical data
D2PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
10.4
0.393
D1
E
8
10
E1
0.315
8.5
0.334
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.625
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
R
0º
0.126
0.015
4º
3
V2
0.4
1
13/16
Packaging mechanical data
5
STB19NF20 - STF9NF20 - STP19NF20
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
MAX.
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
* on sales type
14/16
inch
0.933 0.956
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
STB19NF20 - STF9NF20 - STP19NF20
6
Revision history
Revision history
Table 8.
Revision history
Date
Revision
Changes
13-Oct-2006
1
First release
17-Nov-2006
2
Part number has been modified
02-Feb-2007
3
Preliminary version
16-Feb-2007
4
TO-220FP package has been added
15/16
STB19NF20 - STF9NF20 - STP19NF20
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16