STV6417 Audio/video switch and 6-channel SD video filter Data Brief Features – Bottom clamp on all CVBS/Y and RGB inputs; average clamp on C inputs; synchronize clamp on PrPb inputs ■ I²C bus control ■ Interrupt or auto-startup mode: low power consumption ■ Video section – 3 CVBS inputs, 2 CVBS outputs – 3 Y/C inputs, 3 Y/C outputs – Low pass filters (LPF) for standard definition (1H) on six inputs plus bypass LPF (2H). – 6 dB gain on all CVBS/Y and C outputs – Integrated 150 Ω buffers – AC- or DC-coupled video outputs – 1 CVBS output (Y/C adder): RFMOD – 2 slow blanking inputs/outputs – ■ Audio section – 3 stereo inputs, 2 stereo outputs – 1 mono sound output – Stereo-to-mono sound capability – Differential or single-ended audio encoder input – 0/6/9 dB selectable gain on one stereo input – Full-range volume control with soft control – Audio muting on all outputs SCART1 (TV) R/C G B FAST BLANK CVBS AUDIO L AUDIO R CVBS/Y AUDIO L STV6417 R/C/Pr, G/C, B/Pb Switches + Filter C, Y, CVBS/Y Switches + Filter AUDIO R SLOW BLANK AUDIO L AUDIO L MPEG DECODER AUDIO R Y INTERRUPT I²C Audio Switches Volume Control AUDIO R CVBS R/Pr/C G/Y B/Pb FAST BLANK CVBS/Y C SCART2 (VCR) SLOW BLANK Slow & Fast blank Interrupt R/C/Pr G/Y B/Pb FAST BLANK CVBS/Y AUDIO L AUDIO R CVBS/Y C AUDIO L AUDIO R CVBS RF MOD June 2008 AUDIO Mono CVBS/Y detection Low-power Std-by Rev 1 For further information contact your local STMicroelectronics sales office. 1/6 www.st.com 6 Description 1 STV6417 Description The STV6417 is an I²C-controlled integrated circuit designed to switch both audio and video in any dual full-SCART application such as set-top boxes or DVD recorders for European markets. The STV6417 is one of the four brand new products that complete the new generation of audio and video switches from STMicroelectronics, which cover both technically and pricewise the whole market spectrum from low-cost SD retail (zapper set-top box or basic recorder) up to DVR HD operator (set-top boxes or recorders with component outputs). Its complete set of features makes it particularly adapted for all operator and high end retail set-top boxes. Figure 1. STMicroelectronics new generation of audio and video switches Retail FTA SD Zapper FTA SD CI/CAS Operator SD DVR HD SD HD STV6418 STV6417 STV6419 STV6416 Small footprint The first key differentiator of the STV6417 is its size. It is supplied in a LQFP-48 7 x 7 package, compared with older generation devices that used LQFP-64 10 x 10 and LQFP-64 14 x 14 packages. Reduced bill-of-material A second key differentiator is the STV6417’s ability to reduce the bill-of-material. The STV6417 can interact directly with an MPEG decoder audio output, whether it is voltage- or current-driven. In the latter case, an integrated programmable gain allows designers to reduce the bill-of-material by removing the need for external operational amplifier circuitry. The STV6417 video inputs can be driven either in AC- or DC-coupled mode from the MPEG decoder video DAC outputs, again decreasing the need for external components. The STV6417 can drive AC- or DC-coupled output loads, saving the need for additional external buffer circuitry or coupling capacitors. A dedicated video and a mono audio output are available to drive an RF modulator. The STV6417 integrates 6 dB video buffers in series with each of the six by-passable standard definition (SD) low-pass filters. It can connect to six video DAC outputs of the MPEG decoder, allowing it to switch and drive at the same time the composite and RGB signals on the TV SCART outputs, as well as the S-video signal on the VCR SCART output. 2/6 STV6417 Description The STV6417’s RGB inputs connected to both the MPEG decoder and VCR SCART are YPbPr-compatible and can therefore be adapted for other niche applications (SCART-tocomponent bundled connector). Optimized power consumption in stand-by The third key differentiator of the STV6417 is its power consumption, especially in stand-by. It embeds a brand new function that allows an automatic VCR-to-TV or TV-to-VCR SCART loop-through as soon as a composite or a luminance signal is active on one of the SCART inputs. This function allows an instantaneous loop-through while saving power consumption in stand-by. The STV6417 can achieve a market-lowest 50 mW stand-by consumption, demanding less than 10% of the power budget that shall soon be required by legislation or according to the average existing rules of conduct. Platform scalability Finally, the fourth key differentiator of the STV6417 and its associated products is their ability to cover all the dual SCART market spectrum, offering cost savings not only on device and bill-of-materials, but also on engineering and scalability cost. For example, the STV6417 shares the same footprint as the STV6419AG, allowing either one step for connectivity downgrades for a single HD platform, or one step for connectivity upgrades for a single SD platform in order to serve different customer connectivity requirements (support for S-video on VCR SCART output, support for Canal+ analog, component output allowed or not for HD content copyright protection), optimizing platform cost without re-engineering. Figure 2. Platform scalability TV SCART out No RGB Loop-through No YPbPr out TV SCART out RGB Loop-through No YPbPr out TV SCART in/out RGB Loop-through No YPbPr out TV SCART in/out RGB Loop-through YPbPr out VFQFPN-28 5×5 LQFP-48 7×7 LQFP-48 7×7 TQFP-48 7×7 EP STV6419AG STV6417AG STV6418AH STV6419AG STV6417AG STV6419AG STV6417AG High-End STB HD DVR Retail FTA CA/CI SD Retail FTA Zapper STV6416AJ STV6419AG 3/6 Application 2 STV6417 Application Typical applications for the STV6417 are: 2.1 ● Full dual-SCART standard definition (SD) set-top boxes (free-to-air or operator) ● Full dual-SCART high definition (HD) set-top boxes (free-to-air or operator) ● DVD recorders Ordering information Table 1. Ordering information Part number STV6417AG 4/6 Packaging LQFP-48 7 × 7 STV6417 3 Revision history Revision history Table 2. Document revision history Date Revision 27-Jun-2008 1 Changes Initial release. 5/6 STV6417 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 6/6