Strobe Light Transformer<SMD Type: CEEH Series> Type: CEEH64/TW ◆ Product Description ・8.0×6.8mm Max.(L×W), 4.8mm Max. Height . ・In addition to the typical versions of parameters shown here, custom parameters are available to meet your exact requirements ◆ Feature ・Low loss ferrite core used. ・Special winding technique for high reliability. ・Step-up transformer for DSC strobe light. ・RoHS Compliance ◆ Dimensions (mm) 1 6 1 1.5 02 1.9 1.6 1.6 3 DATE CODE (0.6) 0.3 3 10.0 MAX.(9.6 TYP.) (8.4) 0.2 6.8 MAX.(6.4 TYP.) 4 6-0.35 4.8 MAX.(4.4 TYP.) (0.6) 0.1 8.0 MAX.(7.3 TYP.) 4 6 ADHESIVE ◆ Land Pattern (mm) ◆ Schematics (Bottom) S 3 4 S 2 5 1 6 S ＊ Winding start is #2,3 and #4． ◆ Specification Part No. Stamp Inductance (μH)(4-1) 1kHz Input voltage (Vdc) 2308-T002 02 12.2±25% 3.5 Output Voltage(V) DC superposition permission current (4-1)(A) ※1 280 2.2 ※1. DC superposition permission current is the value at which the inductance decreases by 20% from its initial value. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1