LAN Transformer< SMD Type: CLP Series> Type: CLP8D25 ◆ Product Description ・12.3mm×9.05mm Max. (L×W),2.7mm Max. Height. ・Pulse transformer + filter module for LAN 10/100 Base-T(IEEE802.3). ・In addition to the typical parameters shown here, custom designs are available. ◆ Feature ・10/100Base-T discrete single port modules. ・Ideally used in LAN applications, router, Hub, switch, etc. ・RoHS Compliance. ◆ Dimensions (mm) 12.05±0.25 8.8±0.25 11.35 ±0.25 16 15 14 11 10 9 038 Date code 密番 sumida sumida (4) 桁 0.3 1.27±0.15 1.27±0.15 1 2 3 2.7 Max. ◆ Land Pattern (mm) 6 7 8 ◆Schematics(Bottom) 1.8 １ Tx １ ： １ 3 16 １ＣＴ ： １ＣＴ 14 2 １ ： １ 9.0 0.8 15 10 ７ Rx ６ １ＣＴ ： １ＣＴ ９ 1.8 ８ 11 P2-1.27 P2-1.2 9.69 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 LAN Transformer< SMD Type: CLP Series> Type: CLP8D25 ◆ Specification(180038) Specification Item Ｔｘ Insertion loss Return loss Diffential to common Mode rejection Inductance Cross talk Condition Ｒｘ 1.2 dB Max 1.2 dB Max (0.1MHz) 1.0 dB Max 1.0 dB Max (1～100MHz) (30MHz) 16 dB Min 16 dB Min 12 dB Min 12 dB Min (60MHz) 10 dB Min 10 dB Min (100MHz) 40 dB Min 40 dB Min (30MHz) 35 dB Min 35 dB Min (60MHz) 30 dB Min 30 dB Min (100MHz) 350μH Min ( 15 - 16 ) 200μH Min (9 - 10) 40 dB Min 40 dB Min （30MHz） 40 dB Min 40 dB Min (60MHz) 35 dB Min 35 dB Min (100MHz) Turns ratio 1CT:1CT±5％Within Voltage isolation AC 1500 V(50/60Hz) (100kHz,0.1Vrms) DC bias 8mA 1CT:1C±5％Within for 6 seconds Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2