IFT COILS < Pin Type: P-7 Series> Type: P-7GJ/MW, P-7GJ/SW ◆ Product Description ・7.6×7.6mm Max.(L×W), 12.5mm Max. Height. ・Inductance:1~680µH Max. ・Operating frequency:22MHz Max. ・In addition to the reference versions of parameters shown here,custom designs are available to meet your exact requirements ◆ Feature ・Variable shielded type. ・MW,SW types are available. ・Internally assembled condenser is available. ・Ideally used in Radio(MW,SW) ,TV. Transceiver ・RoHS Compliance 4.5 ±0 .15 4.5 ±0.15 7. 3 ±0. 3 3.5±0.5 +0 .05 1 .3- 0.0 1 +0. 1 φ 0.5 -0. 05 ◆ Dimensions (mm) ※ 7.3 ± 0.3 + 1.0 3.0-0.5 1 2.0 ±0. 5 1.8 ± ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ◆ Terminal Layout (mm) ◆ Connection (Bottom View) ③ ④ Ｓ ③ ④ 4.5 φ0.8×5 φ1.2×2 ② Ｓ ① ⑥ ② × ① ⑥ 7.4 P-7GJ/MW P-7GJ/SW “S” is winding start Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 IFT COILS < Pin Type: P-7 Series> Type: P-7GJ/MW, P-7GJ/SW ◆ Specification( P-7GJ/MW) (Part No.S0995614) （１−３） Measuring conditions 190 μH ± 6% Variable 796kHz 80 Min. 796kHz Item Inductance Unloaded Qu Using Frequency: 600kHz∼755kHz ◆ Specification (P-7GJ/SW) (Part No.S0995479) Item Inductance (1-3) Measuring conditions 1.36μH±5% Variable 7.96MHz 60 Min. 7.96MHz Unloaded Qu Using Frequency: 6.8MHz∼22.4MHz Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2