IFT Coils < Pin Type: PG Series> Type: PG78 /FM, PG78/AM, PG78/SW, PG78/MW ◆ Product Description ・7.6×7.6mm Max.(L×W), 8.7mm Max. Height. ・Inductance:1~820µH. ・Operating frequency:20MHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements. ◆ Feature ・Variable shielded type. ・FM,AM,SW,MW types are available. ・Internally assembled condenser is available. ・Ideally used in Radio (FM, AM,SW,MW),TV. Transceiver ・RoHS Compliance 8.2±0.5 4.5±0.15 7.3±0.3 7.5 +0.1 φ0.5-0.05 3.5±0.3 1.0±0.15 ◆ Dimensions (mm) 4.5±0.15 7.3±0.3 ±0.5 3.0 ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ＊ Dimension without tolerance are approx. ◆ Connection (Bottom View) ③ ④ ④ ⑥ PG78/FM ④ S ③ ② S ② ② S ① S ③ ① PG78/AM ⑥ S ④ S ③ ② S ① ⑥ PG78/SW ⑥ S ① PG78/MW “S” is winding start Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 IFT Coils < Pin Type: PG Series> Type: PG78 /FM, PG78/AM, PG78/SW, PG78/MW ◆ Specification (PG78/FM) (Part No. 2176-T060) (1-3) Using frequency Measuring Condition １０.７ＭＨｚ±１％ Variable Unloaded Qu ６０ Min. １０.７ＭＨｚ Capacity (Int.) １００ｐＦ±１０％ Ext stray capacity 0pF between (1-3) at measuring. ◆ Specification (PG78/AM) (Part No. S0975881) Item (1-3) Frequency Measuring Conditions 455kHz±2% Variable Unloaded Qu Capacity (INT.) 50 Min. 455kHz 180pF±10% ◆ Specification (PG78/SW) (Part No. 2178-T044) Item Inductance Unloaded Qu (1-3) Measuring Conditions 110µH ± 4% Variable 2.52MHz 40 Min. 2.52MHz ◆ Specification (P-7GB/MW) (Part No. 2177-T074) Item Inductance Unloaded Qu (1-3) 400μＨ± 5％ Measuring Condition Variable 55 Min. ７９６KHz ７９６KHz Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2