EMC CHOKE COIL <Pin Type: SFC Series> Type: SFC68 ◆ Product Description ・7.5×6.2mm Max.(L×W), 8.2mm Max. Height . ・Inductance Range: 5.3μH～28.2μH ・Rated current range: 0.6～2.9A ・ In addition to the standard versions of parameters shown here, custom designs are available to meet your exact requirements. ◆ Feature ・Ideally used as signal noise filter common mode chokes for I/O port of PC,micro-computer,and related terminal equipment of better characteristics in high frequency range. ・RoHS Compliance 7.2±0.3 0.6 ±0.5 5.08 ◆ Dimensions (mm) 6.0±0.2 1.0±0.2 8.0±0.2 ±0.5 4.5 2.54±0.5 A DH E S IV E ＊ Dimension does not include solder used on coil. ＊ Terminal pitch is measured at the base(not from tip of the pin) ◆ Schematics (Bottom) ●② ③ ●① ④ ● MARKING OF POLARITY Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 EMC CHOKE COIL <Pin Type: SFC Series> Type: SFC68 ◆ Specification Part name Stamp Inductance at 1 MHz (μH) 1-4 2-3 SFC68NP-PNØ8 P08 5.3 SFC68NP-PN1Ø P10 8.0 SFC68NP-PN12 P12 11.5 SFC68NP-PN14 P14 15.7 SFC68NP-WNØ8 W08 39.5 SFC68NP-WN1Ø W10 60.7 SFC68NP-WN12 W12 87.5 SFC68NP-WN14 W14 121.5 SFC68NP-WNBØ4 B04 4.3 SFC68NP-WNBØ6 B06 9.5 SFC68NP-WNBØ8 B08 17.2 SFC68NP-WNB1Ø B10 28.2 Impedance （Ω）MIN. 1-4 2-3 1100 200 (80MHz～ (10MHz) 100MHz) 1200 350 (80MHz～ (10MHz) 100MHz) 1050 550 (80MHz～ (10MHz) 100MHz) 650 750 (80MHz～ (10MHz) 100MHz) 850 650 (30MHz～ (10MHz) 100MHz) 1050 1050 (30MHz～ (10MHz) 100MHz) 1100 1500 (30MHz～ (10MHz) 100MHz) 1100 2100 (30MHz～ (10MHz) 100MHz) 110 (10MHz) 150(30MHz) 200 250(300MHz) (100MHz) 250 (10MHz) 400(30MHz) 500 300(300MHz) (100MHz) 450 (10MHz) 750(30MHz) 700 300(300MHz) (100MHz) 750 (10MHz) 1150(30MHz) 800 250(300MHz) (100MHz) Rated Insulation Resistance (Coil-coil) D.C.250V (MΩ) MIN. D.C.R. (ｍΩ) <TYP.> Current 67.5 1.05 10 82.5 0.82 10 100.5 0.68 10 114.0 0.60 10 64.9 1.30 10 80.0 1.15 10 94.5 1.08 10 110.0 0.95 10 19.5 2.90 10 25.5 1.80 10 33.5 1.50 10 41.5 1.05 (A)※1 10 ※1. Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2