SN54LS06, SN54LS16, SN74LS06, SN74LS16 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS020A – MAY 1990 • • • • • Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Input Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays Package Options Include “Small Outline” Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs SN54LS06, SN54LS16 . . . J PACKAGE SN74LS06, SN74LS16 . . . D OR N PACKAGE (T0P VIEW) 1A 1Y 2A 2Y 3A 3Y GND 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 6A 6Y 5A 5Y 4A 4Y description These circuits are compatible with most TTL families. Inputs are diode-clamped to minimize transmission-effects, which simplifies design. Typical power dissipation is 175 mW and average propagation delay time is 8 ns. 1Y 1A NC VCC 6A SN54LS06, SN54LS16 . . . FK PACKAGE (T0P VIEW) 2A NC 2Y NC 3A 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 6Y NC 5A NC 5Y 3Y GND NC 4Y 4A These monolithic hex inverter buffers/drivers feature high-voltage open-collector outputs to interface with high-level circuits (such as MOS), or for driving high-current loads, and are also characterized for use as inverter buffers for driving TTL inputs. The ′LS06 has a rated output voltage of 30 V and the ′LS16 has a rated output voltage of 15 V. The maximum sink current for the SN54LS06 and SN54LS16 is 30 mA and the SN74LS06 and SN74LS16 is 40 mA. NC – No internal connection The SN54LS06 and SN54LS16 are characterized over the full military temperature range of – 55°C to 125°C. The SN74LS06 and SN74LS16 are characterized for operation from 0°C to 70°C. logic symbol† logic diagram (positive logic) 1A 1 2A 3 2 1Y 4 2Y 1A 3A 5 4A 9 6 3Y 8 4Y 2A 5A 11 6A 13 10 5Y 12 6Y 3A † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for D, J, and N packages. 4A 5A 6A 1 2 1Y 3 4 2Y 5 6 9 8 11 10 13 12 3Y 4Y 5Y 6Y Copyright 1990, Texas Instruments Incorporated UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54LS06, SN54LS16, SN74LS06, SN74LS16 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS020A – MAY 1990 schematic (each gate) VCC 2.5 kΩ 9 kΩ 1 kΩ 15 kΩ Output 2.5 kΩ Input 2 kΩ 2 kΩ GND absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Output voltage, VO (see Notes 1 and 2): SN54LS06, SN74LS06 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V SN54LS16, SN74LS16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V Operating free-air temperature range: SN54LS06, SN54LS16 . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74LS06, SN74LS16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. This are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Voltage values are with respect to network ground terminal. 2. This is the maximum voltage that should be applied to any output when it is in the off state. recommended operating conditions SN54LS06 SN74LS06 SN54LS16 VCC VIH Supply voltage VIL Low-level input voltage High-level input voltage VOH High-level output voltage IOL TA Low-level output current UNIT NOM MAX MIN NOM MAX 4.5 5 5.5 4.75 5 5.25 2 2 V V 0.8 0.8 ’LS06 30 30 ’LS16 15 15 V 30 40 mA 70 °C Operating free-air temperature – 55 PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. 2 SN74LS16 MIN POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 125 0 V SN54LS06, SN54LS16, SN74LS06, SN74LS16 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS020A – MAY 1990 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) SN54LS06 TEST CONDITIONS† PARAMETER VIK VCC = MIN, II = – 12 mA IOH VCC = MIN, VIL = 0.8 V VOL VCC = MIN, VIH = 2 V SN74LS06 SN54LS16 MIN TYP‡ MAX ’LS06, VOH = 30 V ’LS16, VOH = 15 V IOL = 16 mA IOL = 30 mA SN74LS16 TYP‡ MAX – 1.5 – 1.5 0.25 0.25 0.25 0.25 0.25 UNIT MIN 0.4 0.25 V mA 0.4 0.7 V IOL = 40 mA 0.7 II IIH VCC = MAX, VCC = MAX, VI = 7 V VI = 2.4 V 1 1 20 20 µA IIL ICCH VCC =MAX, VCC = MAX VI = 0.4 V – 0.2 – 0.2 mA 18 18 mA 60 mA ICCL VCC = MAX 60 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ‡ All typical values are at VCC = 5 V, and TA = 25°C. mA switching characteristics, VCC = 5 V, TA = 25°C (see Note 3) PARAMETER tPLH tPHL FROM TO (INPUT) (OUTPUT) A Y TEST CONDITIONS RL = 110 Ω, CL = 15 pF MIN TYP MAX 7 15 10 20 UNIT ns NOTE 3: Load circuit and voltage waveforms are shown in Section 1 of TTL Logic Data Book, 1988. PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI products in such applications requires the written approval of an appropriate TI officer. Questions concerning potential risk applications should be directed to TI through a local SC sales office. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor does TI warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. Copyright 1995, Texas Instruments Incorporated