TOSHIBA TC7SET34FU

TC7SET34F/FU
TOSHIBA CMOS Digital Integrated Circuit
Silicon Monolithic
TC7SET34F,TC7SET34FU
Non-Invert Buffer
Features
•
High speed ................................. tpd = 5.0 ns (typ.)
TC7SET34F
at VCC = 5 V
•
Low power dissipation .............. ICC = 2 μA (max)
at Ta = 25°C
•
Compatible with TTL outputs...VIL = 0.8 V (max.)
VIH = 2.0 V (min.)
•
5.5V tolerant input.
TC7SET34FU
Weight
SSOP5-P-0.95 : 0.016 g (typ.)
SSOP5-P-0.65A : 0.006 g (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Supply voltage range
DC input voltage
DC output voltage
Input diode current
Output diode current
DC output current
DC VCC/ground current
Power dissipation
Storage temperature
Lead temperature (10 s)
Marking
Symbol
Rating
Unit
VCC
VIN
VOUT
IIK
IOK
IOUT
ICC
PD
Tstg
TL
−0.5~7.0
−0.5~7.0
−0.5~VCC + 0.5
−20
±20
±25
±50
200
−65~150
260
V
V
V
mA
mA
mA
mA
mW
°C
°C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/Derating Concept and Methods) and individual
reliability data (i.e. reliability test report and estimated failure rate,
etc).
1
Type name
G
F
Pin Assignment (top view)
NC 1
5
VCC
4
OUT Y
IN A 2
GND 3
2007-11-01
TC7SET34F/FU
Logic Diagram
IN A
Truth Table
INPUT
OUTPUT
A
Y
OUT Y
1
L
L
H
H
Operating Ranges
Characteristics
Symbol
Rating
Unit
Supply voltage
VCC
4.5~5.5
V
Input voltage
VIN
0~5.5
V
VOUT
0~Vcc
V
Operating temperature
Topr
−40~85
°C
Input rise and fall time
dt/dv
0~20
ns/V
Output voltage
DC Electrical Characteristics
Ta = 25°C
Characteristics
Symbol
Test Condition
High-level input voltage
VIH
Low-level input voltage
VIL
High-level output voltage
VOH
Low-level output voltage
VOL
Input leakage current
Quiescent supply current
Unit
Min
Typ.
Max
Min
Max
⎯
4.5~
5.5
2.0
⎯
⎯
2.0
⎯
V
⎯
4.5~
5.5
⎯
⎯
0.8
⎯
0.8
V
IOH = −50 μA
4.5
4.4
4.5
⎯
4.4
⎯
IOH = −8 mA
4.5
3.94
⎯
⎯
3.80
⎯
IOL = 50 μA
4.5
⎯
0.0
0.10
⎯
0.10
IOL = 8 mA
4.5
⎯
⎯
0.36
⎯
0.44
VIN = VIH
VIN = VIH
or
Ta = −40~85°C
VCC
(V)
VIL
V
V
IIN
VIN = 5.5 V or GND
0~
5.5
⎯
⎯
±0.1
⎯
±1.0
μA
ICC
VIN = VCC or GND
5.5
⎯
⎯
2.0
⎯
20.0
μA
5.5
⎯
⎯
1.35
⎯
1.50
mA
ICCT
Per Input
:VIN = 3.4 V
Other Input
:VCC or GND
AC Characteristics (input: tr = tf = 3 ns)
Characteristics
Symbol
VCC (V)
Propagation delay time
tpLH
tpHL
Input capacitance
CIN
Power dissipation capacitance
CPD
Ta = 25°C
Test Condition
5.0 ± 0.5
Ta = −40~85°C
Unit
CL (pF)
Min
Typ.
Max
Min
Max
15
⎯
5.0
7.0
1.0
8.0
50
⎯
8.0
10.5
1.0
12.0
⎯
4
10
⎯
10
pF
⎯
17
⎯
⎯
⎯
pF
(Note)
ns
Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
ICC (opr) = CPD・VCC・fIN + ICC
2
2007-11-01
TC7SET34F/FU
Package Dimensions
Weight: 0.016 g (typ.)
3
2007-11-01
TC7SET34F/FU
Package Dimensions
Weight: 0.006 g (typ.)
4
2007-11-01
TC7SET34F/FU
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5
2007-11-01