1N4001S -1N4007S 1.0 AMP. Silicon Rectifiers A-405 Features High efficiency, Low VF High current capability High reliability High surge current capability Low power loss ψ0.6mm leads Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free., solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode High temperature soldering guaranteed: 260oC/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Weight: 0.22 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @T A = 75 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @1.0A VRRM VRMS VDC Maximum Full Load Reverse Current, Full Cycle Average .375”(9.5mm) Lead Length o @T A=75 C Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance ( Note 2 ) 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 Units 1000 700 1000 V V V I(AV) 1.0 A IFSM 30 A VF 1.0 V IR 5.0 50 uA uA HTIR 30 uA Cj 15 50 -65 to +150 o Maximum DC Reverse Current @ T A=25 C o at Rated DC Blocking Voltage @ T A=125 C 1N 1N 1N 1N 1N 1N 1N 4001S 4002S 4003S 4004S 4005S 4006S 4007S R θJA Operating and Storage Temperature Range T J ,T STG 1. Measured at 1 MHz and Applied Reverse Voltage of 4..0 Volts D.C. Notes: 2. Mount on Cu-Pad Size 5mm x 5m on P.C.B. o pF C/W o C Version: A06 FIG.2- TYPICAL REVERSE CHARACTERISTICS FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 1 10 0.8 INSTANTANEOUS REVERSE CURRENT. ( A) 4 0.6 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0.4 0.2 0 0 25 50 75 100 125 150 175 o AMBIENT TEMPERATURE. ( C) Tj=125 0C 1 0.4 0.1 0.04 Tj=25 0C PEAK FORWARD SURGE CURRENT. (A) FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 0.01 40 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 8.3ms Single Half Sine Wave JEDEC Method 30 20 10 0 1 2 4 6 8 10 20 60 80 100 40 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL JUNCTION CAPACITANCE FIG.5- TYPICAL FORWARD CHARACTERISTICS 200 INSTANTANEOUS FORWARD CURRENT. (A) 20 100 JUNCTION CAPACITANCE.(pF) AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATINGS AND CHARACTERISTIC CURVES (1N4001S THRU 1N4007S) 60 40 20 10 0 Tj=25 C 6 4 2 1 0.1 0.2 0.4 1 2 4 REVERSE VOLTAGE. (V) 10 20 40 100 10 2 1 0.4 0.2 0.1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 0.04 0.02 0.01 0.6 0.8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) Version: A06 1.5