KBU1001G THRU KBU1007G Single Phase 10 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 10.0 Amperes KBU Features UL Recognized File # E-96005 Glass passivated junction Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Surge overload rating to 200 amperes peak High temperature soldering guaranteed: 260oC / 10 seconds / .375”, (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0. 3 ounce, 8.0 grams Mounting torque: 5 in. lb. Max. .935(23.7) .895(22.7) .160(4.1) .140(3.6) 45 .70(17.8) .66(16.8) 0 .185(4.7) .165(4.2) .280(7.1) .260(6.6) .085(2.2) .065(1.7) .455(11.3) .405(10.3) .760(19.3) MAX 1.0(25.4) MIN .260(6.8) .180(4.5) .165(4.2) .150(3.8) .220(5.6) .180(4.6) .052(1.3) .048(1.2) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA =45℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 10.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note) Operating Temperature Range Symbol KBU KBU KBU KBU KBU KBU KBU 1001G 1002G 1003G 1004G 1005G 1006G 1007G VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 Units V V V I(AV) 10.0 A IFSM 200 A VF 1.1 V 5.0 500 2.2 -55 to +150 -55 to +150 uA uA ℃/W ℃ ℃ IR RθJC TJ TSTG Note: Thermal Resistance from Junction to Case with Device Mounted on 4” x 6” x 0.25”Al-Plate Heatsink. Storage Temperature Range - 760 - RATINGS AND CHARACTERISTIC CURVES (KBU1001G THRU KBU1007G) 10 AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 250 FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 200 150 100 50 0 8 6 4 2 0 1 2 4 6 8 10 20 40 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 60 80 100 0 50 o FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 100 40 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) 150 100 AMBIENT TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz 20 10 4 2 1 0.4 10 1 0 TJ=25 0C Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0.2 0.1 0.6 TJ=125 0C 0.7 0.8 0.9 1.0 1.1 1.2 0.1 0 1.3 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) INSTANTANEOUS FORWARD VOLTAGE. (V) - 761 - 140