MBRS1635 - MBRS16150 16.0 AMPS. Surface Mount Schottky Barrier Rectifiers D2PAK Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection Higho temperature soldering guaranteed: 260 C/10 seconds,0.25”(6.35mm)from case Mechanical Data 2 Cases: JEDEC D PAK molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Symbol MBRS MBRS MBRS MBRS MBRS 1635 1645 1650 1660 1690 35 45 50 60 90 VRRM 24 31 35 42 63 VRMS 35 45 50 60 90 VDC MBRS MBRS 16100 16150 100 70 100 Units 150 105 150 V V V Maximum Average Forward Rectified Current O at Tc=125 C I(AV) 16 A Peak Repetitive Forward Current (Rated VR, Square o Wave, 20KHz) at Tc=125 C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: (Note 2) o IF=16A, TC=25 C o IF=16A, TC=125 C Maximum Instantaneous Reverse Current o @ Tc =25 C at Rated DC Blocking Voltage (Note 2) o @ Tc=125 C IFRM 32.0 A IFSM 150 A Maximum Typical Thermal Resistance(Note 3) Operating Junction Temperature Range IRRM 1.0 VF 0.63 0.57 0.75 0.65 0.85 0.82 0.95 0.92 V IR 0.5 15 0.5 10 0.3 7.5 0.1 5.0 mA mA RθJC TJ TSTG 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg Storage Temperature Range Notes: - 62 - 0.5 1.5 -65 to +150 -65 to +175 A o C/W o C o C Version: B07 RATINGS AND CHARACTERISTIC CURVES (MBRS1635 THRU MBRS16150) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 150 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 20 16 12 8 4 100 75 50 25 0 1 0 0 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 NUMBER OF CYCLES AT 60Hz 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS 50 10 Tj=125 0C 10 INSTANTANEOUS FORWARD CURRENT. (A) 150 INSTANTANEOUS REVERSE CURRENT. (mA) 40 50 100 o CASE TEMPERATURE. ( C) Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 120 Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C MBRS1635-MBRS1645 MBRS1650 & MBRS16150 0.1 Tj=125 0C 1 Tj=75 0C 0.1 0.01 Tj=25 0C MBRS1635-MBRS1645 MBRS1650 & MBRS16150 0.001 0.01 0 0.1 0.2 0.3 0.4 0 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 0 Tj=25C f=1.0MHz Vsig=50mVp-p 1,000 MBRS1635-MBRS1645 MBRS1650 & MBRS16150 1 40 60 80 100 120 140 FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS FIG.5- TYPICAL JUNCTION CAPACITANCE 6,000 100 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) 10 REVERSE VOLTAGE. (V) 100 100 10.0 1 0.1 0.01 0.1 1 10 T, PULSE DURATION. (sec) Version: B07 100