UTC-IC IMX17

UTC IMX17
DUAL TRANSISTOR
GENERAL PURPOSE DUAL
TRANSISTOR
FEATURES
*Two 2SD1484K chips in an SMT package.
*Mounting possible with SMT3 automatic mounting
machine.
*Transistor elements are independent, eliminating
interference.
*High collector current. Ic=500mA
*Mounting cost an area can be cut in half.
MARKING
SOT-26
4
5
6
1 7
PIN 1 : Collector (1)
PIN 4: Collector (2)
PIN 2: Base (2)
PIN 5: Base (1)
PIN 3: Emitter (2)
3
2
PIN 6: Emitter (1)
1
4
5
6
Tr1
Tr2
3
UTC
2
1
UNISONIC TECHNOLOGIES CO., LTD.
1
QW-R215-001,B
UTC IMX17
DUAL TRANSISTOR
The following characteristics apply to both Tr1 and Tr2.
ABSOLUTE MAXIMUM RATINGS (Ta=25°C, unless otherwise specified.)
PARAMETER
SYMBOL
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
Collector dissipation
Junction Temperature
Storage Temperature
Note: 200mW per element must not be exceeded.
VCBO
VCEO
VEBO
Ic
Pd
Tj
TSTG
RATING
UNIT
60
50
5
500
300 (TOTAL)
150
-55 ~ +150
V
V
V
mA
mW (note)
°C
°C
ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified)
PARAMETER
SYMBOL
Collector-base breakdown voltage
Collector-emitter breakdown voltage
Emitter-base breakdown voltage
Collector cutoff current
Emitter cutoff current
Collector-emitter saturation voltage
DC current gain
Transition frequency
Output capacitance
Note: Measured using pulse current.
BVCBO
BVCEO
BVEBO
ICBO
IEBO
VCE(sat)
hFE
fT
Cob
TEST CONDITIONS
Ic=100µA
Ic=1mA
IE=100µA
VCB=30V
VEB=4V
Ic=500mA, IB=50mA
VCE=3V,Ic=100mA (note)
VCE=5V, IE=-20mA, f=100MHz
VCE=10V, IE=0A, f=1MHz
MIN
TYP
MAX
60
50
5
0.1
0.1
0.6
390
120
250
7
UNIT
V
V
V
µA
µA
V
MHz
pF
CLASSIFICATION OF hFE
RANK
RANGE
A
120-240
B
240-390
ELECTRICAL CHARACTERISTIC CURVES
UTC
UNISONIC TECHNOLOGIES CO., LTD.
2
QW-R215-001,B
UTC IMX17
DUAL TRANSISTOR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UTC
UNISONIC TECHNOLOGIES CO., LTD.
3
QW-R215-001,B