VECTRON TFS326A

Tfs326A.doc
version 1.8
VI TELE FILTER
14.05.01
Filter Specification
TFS 326A
1/5
Measurement condition
23 °C
0 dBm
Input:
Output
Ambient temperature:
Input power level:
Terminating impedance:
237 Ω  -0.30 pF
237 Ω  -0.30 pF
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 326A is the minimum of the pass band attenuation amin. The
minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean
value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The nominal
frequency fN is fixed on 326,4 MHz without tolerance.
Data
typ. Value
Insertion loss
(Reference level)
ae = amin
Nominal frequency
fN
Centre frequency
fc
Pass band ripple within
fN ± 2,50
tolerance /limit
2,6
dB
max. 4,5
-
326,4
326,4 MHz
MHz
3 dB Bandwidth
MHz
-
-
max. 0,8
dB
-
min. 14,0
MHz
-
max. 0,8
max. 3,0
min. 11,0
min. 15,0
min. 13,0
min. 15,0
min. 11,0
min. 15,0
min. 25,0
min. 25,0
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Relative attenuation
fN
.....
MHz
fN ± 2,5
fN + 12,5 MHz
fN + 13,28 MHz
fN + 14,85 MHz
MHz
fN +18,9
MHz
fN - 12,5
fN - 13,75 MHz
MHz
fN - 30,0
MHz
fN +40,0
arel
MHz
fN ± 2,5
fN ± 7,0
MHz
fN + 13,28 MHz
fN + 14,85 MHz
fN + 18,9 MHz
fN + 40,0 MHz
fN – 13,75 MHz
fN – 30,0 MHz
fN - 316,4 MHz
fN + 123,6 MHz
dB
Group delay ripple
within ±
2,50 MHz
-
max 40,0
ns
Group delay ripple
within ±
7,0 MHz
-
max.100,0
ns
Return loss
within ±
2,50 MHz
min. 12,0
dB
Return loss
within ±
7,0 MHz
-
min.
dB
-
max. 15,0
Input power level
8,0
dBm *
Operating temperature range
- 10 °C ... + 80 °C
Storage temperature range
- 40 °C ... + 85 °C
Temperature coefficient of frequency
TCf
T.B.D.(ca. - 72 ppm/K)
-
*) peaks with 20 dBm allowed for 1:100 duty cycle
Generated:
Checked / Approved:
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
0075
E-Mail: [email protected]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs326A.doc
version 1.8
VI TELE FILTER
18.10.2002
Filter Specification
TFS 326A
2/5
Construction and pin connection
5.0 SQ
7
+0.15
-0.1
5
326A
N24
1
3
Date code
Pin 1
Pin 2
Pin 3
Pin 4
Ground
Ground
Output
Ground
Pin 5
Pin 6
Pin 7
Pin 8
M
Ground
Ground
Input
Ground (pin with slanted edge)
Date code: Year+week
L
1999
2000
N
2001
...
50 Ω test circut 1
L1
IN
7
C1
L2
3
SAW
C2
OUT
1,2,4,5,6,8
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs326A.doc
version 1.8
VI TELE FILTER
18.10.2002
Filter Specification
TFS 326A
3/5
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer
Tape (all dimensions in mm)
W
:
12
EMBOSSED CARRIER
TAPE
± 0,3
Po
:
4
± 0,1
Do
:
1,5
+ 0,5
E
:
1,75 ± 0,1
F
:
5,5 ± 0,1
G (min) :
0,75
P2
:
2
± 0,05
P1
:
8
± 0,1
D1(min) :
1,5
Ao
Bo
:
:
5,3 ± 0,1
5,3 ± 0,1
CT
:
9,5
3000
min 300 mm
min 500 mm
min 300 mm
D o
Po
P
2
E
A
o
F
D
CT
B
1
W
o
G
± 0,1
P1
COVER TAPE
W 2
Reel (all dimensions in mm):
A
:
W1
:
W2 (max) :
330
12,4 ± 2,0
18,4
N (min)
:
50
C
:
13
± 0.2
A
C
N
W 1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the
right side of the tape.
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs326A.doc
version 1.8
VI TELE FILTER
18.10.2002
Filter Specification
TFS 326A
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods main-heating periods
150 °C - 170 °C
over 200 °C
110 sec. - 140 sec. 60 sec. - 65 sec.
peak temperature
230 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time for the given air reflow profile
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
21
21
25
41
80
109
124
134
141
147
150
153
153
153
time / sec.
140
150
160
170
180
190
200
210
220
230
240
250
260
270
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
temperature / °C
153
155
157
159
161
162
163
164
166
168
171
173
176
178
time / sec.
280
290
300
310
320
330
340
350
360
370
380
390
temperature / °C
182
189
200
205
208
211
213
213
210
203
188
168
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs326A.doc
version 1.8
VI TELE FILTER
Version
18.10.2002
Filter Specification
TFS 326A
Reason of Changes
5/5
Name
Date
1.0
- generate according customer requirement specification
Dr. Sabah
10.08.2000
1.1
- Groupe delay ripple within: ± 7,50 MHz
Max. 90 ns
Dr. Sabah
21.08.2000
1.2
- Return loss within: ± 2,50 MHz
- Return loss within: ± 7,50 MHz
Max. 10 dB
Max. 6,5 dB
Dr. Sabah
31.08.2000
1.3
- Pin connection changed : pin 9 input; pin 3 output
Dr. Sabah
31.08.2000
1.4
- Add preliminary values for terminating impedance
Dr. Sabah
11.10.2000
1.5
- changing of 3dB bandwidth to ± 7,0 MHz
- changing of package to 5X5
Dr. Sabah
06.11.2000
1.6
- changing of Return loss to –12dB (within: ± 2,50 MHz)
- changing of stopband between: 342,5 MHz .. 344,5 MHz to – 13 dB
- changing of –15 dB stopband to fn –13,75 MHz
- changing of group delay ripple within : ± 2,50 MHz to 40 ns
- changing of group delay ripple within : ± 7,0 MHz to 100 ns
Dr. S. Sabah
28.02.2001
1.7
1.8
- changing of relative attenation between: fn –15,6 MHz to fn +18,60 MHz
- changing of filter name to TFS326A
- changing of input power specification
- changing of matching circuit
Dr. S. Sabah
15.03.2001
- with customer agreed modification of stopband attenuation
min. 13,0 dB
- fN + 14,85 MHz...fN + 18,9 MHz to
min. 11,0 dB
- fN - 13,75 MHz...fN – 30,0 MHz to
Dr. S. Sabah
14.05.2001
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.